National Instruments NI-XNET Manuel utilisateur

INSTALLATION GUIDE

NI-XNET Hardware and

Software

This installation guide contains instructions to help you install

your National Instruments hardware and software. Complete

documentation is in the NI-XNET Hardware and Software Help

on your NI-XNET installation media. Refer to the NI-XNET

Manual.chm file on the installation media or select National

Instruments»NI-XNET»NI-XNET Documentation»NI-XNET

Manual.chm from the Windows Start menu or NI Launcher.

The NI-XNET software on this installation media supports

Microsoft Windows operating systems.

This installation guide covers National Instruments 851x

hardware products for CAN, LIN, and FlexRay on the PCI/PCI

Express and PXI/PXI Express buses, as well as NI 986x C Series

hardware products and 850x USB hardware products for CAN

and LIN. It is written for users already familiar with Windows.

Install the NI-XNET Software

Before installing the NI-XNET software, users must first log on

as a user with Administrator privileges. The NI-XNET setup

program must have Administrator privileges, because the

program modifies the configuration registry of your system.

Complete the following steps to install the NI-XNET software.

1. Insert the NI-XNET installation media into your computer.

The installer launches if your CD/DVD-ROM drive plays

data disks automatically.

If the installer does not launch automatically, navigate to the

installation media using Windows Explorer and launch the

autorun file from your NI-XNET installation media.

2. The Installation Wizard guides you through the necessary

steps to install the NI-XNET software. You can go back and

change values where appropriate by clicking Back. You can

exit the setup where appropriate by clicking Cancel.

3. Power down your computer when the setup is complete.

4. Proceed to the Install the Hardware section.

2| ni.com | NI-XNET Hardware and Software Installation Guide

Note If you are using LabVIEW Real-Time (RT),

refer to the LabVIEW Real-Time (RT)

Configuration section of Installation and

Configuration in the NI-XNET Hardware and

Software Help for more information about

installing the NI-XNET software on your RT

system and verifying the installation.

Install the Hardware

This section describes how to install your hardware on the

PCI/PCI Express, PXI/PXI Express, and USB buses, as well as

how to install XNET C Series modules.

Install Your PCI/PCI Express Hardware

Caution Before you remove the card from the

package, touch the antistatic plastic package to a metal

part of your system chassis to discharge electrostatic

energy, which can damage components on your CAN,

LIN, or FlexRay card.

1. Make sure that your computer is powered off and unplugged.

NI-XNET Hardware and Software Installation Guide | © National Instruments | 3

2. Remove the top cover (or other access panels) for access to

the computer expansion slots.

Figure 1. Installing a PCI/PCI Express Device

1. PCI/PCI Express Device

2. PCI/PCI Express System Slot

3. PC with PCI/PCI Express Slot

3. Find an unused PCI/PCI Express slot in your computer.

Note Some motherboards reserve the x16 slot for

graphics use. For PCI Express guidelines, refer to

ni.com/pciexpress.

4| ni.com | NI-XNET Hardware and Software Installation Guide

4. Remove the corresponding slot cover on the back panel of the

computer.

5. Insert the CAN, LIN, or FlexRay card into the slot with the

bus connector(s) sticking out of the opening on the back

panel. It might be a tight fit, but do not force the interface

into place.

6. Screw the mounting bracket of the CAN, LIN, or FlexRay

card to the back panel rail of the computer.

7. You can use a RTSI cable to connect your CAN, LIN, or

FlexRay card RTSI interface to other National Instruments

RTSI-equipped hardware. Refer to the Synchronization

section of NI-XNET Hardware Overview in the NI-XNET

Hardware and Software Help for more information about the

RTSI interface on your CAN, LIN, or FlexRay card.

8. Replace the top cover (or the access panel to the expansion

slot).

9. Proceed to the Verify Your Installation section.

Install Your PXI/PXI Express Hardware

Caution Before you remove the card from the

package, touch the antistatic plastic package to a metal

NI-XNET Hardware and Software Installation Guide | © National Instruments | 5

part of your system chassis to discharge electrostatic

energy, which can damage components on your CAN,

LIN, or FlexRay card.

Figure 2. Installing a PXI/PXI Express Device in the Chassis

1. PXI/PXI Express Chassis

2. PXI/PXI Express System

Controller

3. PXI/PXI Express Module

4. Injector/Ejector Handle

5. Front-Panel Mounting Screws

6. Module Guides

7. Power Switch

1. Make sure your PXI, PXI Express, or CompactPCI chassis is

powered off, and unplug the chassis.

6| ni.com | NI-XNET Hardware and Software Installation Guide

2. Choose an unused PXI, PXI Express, or CompactPCI

peripheral slot.

3. Remove the filler panel for the peripheral slot you have

chosen.

4. Touch a metal part on your chassis to discharge any static

electricity that might be on your clothes or body.

5. Insert the PXI/PXI Express card into the selected slot. Use

the injector/ejector handle to fully inject the card into place.

6. Screw the front panel of the PXI/PXI Express card to the

front panel mounting rail of the PXI, PXI Express, or

CompactPCI chassis.

7. Proceed to the Verify Your Installation section.

Install Your USB Hardware

1. Find an unused High-Speed USB 2.0 port in your computer.

2. Insert the USB cable of your USB-850x CAN or LIN module

into the USB port.

3. You can use a synchronization cable to connect your

USB-850x 2-port CAN or LIN module to other National

Instruments synchronization port-equipped hardware. Refer

to the Synchronization section of NI-XNET Hardware

NI-XNET Hardware and Software Installation Guide | © National Instruments | 7

Overview in the NI-XNET Hardware and Software Help for

more information.

4. Proceed to the Verify Your Installation section.

Install Your C Series Hardware

Caution Before you remove the module from the

package, touch the antistatic plastic package to a metal

part of your system chassis to discharge electrostatic

energy, which can damage components on your

module.

Complete the following steps to install a C Series I/O module:

1. When using your C Series hardware with a CompactDAQ

chassis, refer to the chassis user manual for detailed

installation instructions.

2. When using your C Series hardware with a CompactRIO

chassis, refer to the Installing C Series I/O Modules in the

Chassis section of the NI cRIO-9101/9102/9103/9104 User

Manual and Specifications document for detailed installation

instructions.

3. Connect the power source to the NI 986x C Series module.

The NI 986x module requires an external power supply that

8| ni.com | NI-XNET Hardware and Software Installation Guide

meets the specifications listed in the respective operating

instructions document.

4. Proceed to the Verify Your Installation section.

Verify Your Installation

1. Power on your computer and start Windows.

A New Hardware Found dialog box may appear. If a dialog

box appears and does not go away on its own, choose the

default option, Install the Software Automatically

(Recommended), and let the operating system install the

driver files.

2. Launch Measurement & Automation Explorer (MAX) and

refresh (press <F5> or choose View»Refresh from the

menu). Your CAN, LIN, and FlexRay hardware should be

listed now under Devices and Interfaces. To test all detected

CAN, LIN, and FlexRay hardware, right-click each

NI-XNET device and select Self Test. If you are using an

NI 986x C Series module with CompactRIO, refer to the

Getting Started with CompactRIO section in the NI-XNET

Hardware and Software Help.

3. Proceed to the Connect the Cables section.

NI-XNET Hardware and Software Installation Guide | © National Instruments | 9

Troubleshooting

If you have problems installing your software, go to ni.com/

xnet. For hardware troubleshooting, go to ni.com/support

and enter your device name, or go to ni.com/kb.

If you think you have damaged your device and need to return

your National Instruments hardware for repair or device

calibration, go to ni.com/info and enter the Info Code

rdsenn for information about the Return Merchandise

Authorization (RMA) process.

Connect the Cables

After you have installed the hardware, connect your cables to the

hardware. Refer to the Cabling Requirements section for your

CAN, LIN, or FlexRay hardware in NI-XNET Hardware

Overview in the NI-XNET Hardware and Software Help for

information about the cabling requirements of the CAN, LIN, and

FlexRay hardware.

Uninstalling the NI-XNET Software

Complete the following steps to uninstall the NI-XNET software.

10 | ni.com | NI-XNET Hardware and Software Installation Guide

Table des matières

Autres manuels National Instruments Carte réseau

National Instruments

National Instruments NI 6232 Manuel utilisateur

National Instruments

National Instruments Module NI PXI-8250 Manuel utilisateur

National Instruments

National Instruments Network Device NI PXI-7811R Manuel utilisateur

National Instruments

National Instruments NI 9853 Manuel utilisateur

National Instruments

National Instruments Measure Data Acquisition Manuel utilisateur

National Instruments

National Instruments NI MATRIXx Xmath Manuel utilisateur

National Instruments

National Instruments NI 9425 Manuel utilisateur

National Instruments

National Instruments NI 9235 Manuel utilisateur

National Instruments

National Instruments NI 9476 Manuel utilisateur

National Instruments

National Instruments NI 9219 Manuel utilisateur

National Instruments

National Instruments Network Device DAQ S Manuel utilisateur

National Instruments

National Instruments NI 9472 Manuel utilisateur

National Instruments

National Instruments NI CardBus-8310-to-PXI Expansion Manuel utilisateur

National Instruments

National Instruments Module SCXI-1125 Manuel utilisateur

National Instruments

National Instruments IMAQ PCI-1410 Manuel utilisateur

National Instruments

National Instruments Module SCXI-1503 Manuel utilisateur

National Instruments

National Instruments NI PCI-6110 Manuel utilisateur

National Instruments

National Instruments NI 9403E Manuel utilisateur

National Instruments

National Instruments Network Adapter NI PXIe-6672 Manuel utilisateur

National Instruments

National Instruments NI 2590/2591 Manuel utilisateur

National Instruments

National Instruments Graphical User Interface Ultiboard Manuel utilisateur

National Instruments

National Instruments NI PXI-1056 Manuel utilisateur

National Instruments

National Instruments NI 781xR Manuel utilisateur

National Instruments

National Instruments NI 9217 Manuel utilisateur

Manuels Carte réseau populaires d'autres marques

FirstComm

FirstComm OBiWiFi5G Manuel utilisateur

Sun Microsystems

Sun Microsystems Interface Adapter Manuel utilisateur

TRENDnet

TRENDnet TU2-ETG Manuel utilisateur

YASKAWA

YASKAWA SI-EN3 Manuel utilisateur

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuel utilisateur

Belkin

Belkin F5D7050 Manuel utilisateur

3Com

3Com EtherLink 3C509B Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITX Manuel utilisateur

Cisco

Cisco MC16E Manuel utilisateur

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuel utilisateur

TwinMOS

TwinMOS Booming Manuel utilisateur

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuel utilisateur

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuel utilisateur

Hama

Hama 49276 Manuel utilisateur

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuel d'utilisation

Compaq

Compaq Wireless LAN 100 Manuel utilisateur

Bose

Bose PowerMatch Dante Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITXR Manuel utilisateur