Nat AA21-400 Manuel utilisateur
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
SM34
AA21-400
Cabin PA System
INSTALLATION AND OPERATION MANUAL
REV. 4.00 November 10, 2003
Northern Airborne Technology Ltd.
1925 Kirschner Road
Kelowna BC, Canada
V1Y 4N7
Telephone (250) 763-2232
Facsimile (250) 762-3374
Copyright 2003 by Northern Airborne Technology
The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
SM34 Rev. 4.00 AA21-400 Cabin PA System Manual
Nov 10, 2003 Page ii
ENG-FORM: 820-0109.DOT Amendment #2 May 24, 2006
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
Periodically NAT will release manual amendments. In order to maintain the most
accurate and up to date manual these amendments should be carried out immediately
upon receipt and recorded on the following amendment record.
AMENDMENT RECORD
Amendment
Number Amendment
Date Section(s)
Changed Date
Entered
Entered By
1 Jan 18\05 2
2 May 24\06 Pg iii, 1
3 Apr 21\09 2
Insert any Amendment Instruction sheets after this page.
The document reference is online, please check the correspondence between the online documentation and the printed version.
Performed at factory
Performed at factory
Performed at factory
The document reference is online, please check the correspondence between the online documentation and the printed version.
INSTALL_OPS
MANUAL AMENDMENT
Manual: SM34 (AA21-400) Amendment #: 3
Document # SM34\Install_Ops\809-0003 Amendment Date: Apr 21, 2009
Amendment #3 Apr 21, 2009 Page 1
ENG-FORM: 809-0109.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
The purpose of this amendment is to add the latest drawings to the manual.
Amendment Instructions:
1 Remove Pages Replace With Pages
2-5 Rev 4.00 Amendment 1 2-5 Rev 4.00 Amendment #3
2 Remove Drawings (Section 2) Replace or add Drawings (Section 2)
AA21\400\403-0 Rev 1.00 AA21\400\403-0 Rev 1.01
AA21\400\905-0 Rev 1.00 AA21\400\905-0 Rev 1.10
3 Update the Amendment Record sheet at the front of the manual.
4 Insert this page into the manual after the Amendment Record sheet (page ii).
Manual Amendment ends after the following amended pages
The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
INSTALL_OPS
MANUAL AMENDMENT
Manual: SM34 (AA21-400) Amendment #: 2
Document # SM34\Install_Ops\809-0002 Amendment Date: May 24, 2006
Amendment #2 May 24, 2006 Page 1
ENG-FORM: 809-0109.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
The purpose of this amendment is to correct the numbering sequence and add section
1.5 Accessories Required But Not Supplied to the table of contents.
Amendment Instructions:
1 Remove Pages Replace With Pages
Title Section Page iii Rev 4.00 Title Section Page iii Rev 4.00 Amendment #2
1-3 and 1-4 Rev 4.00 1-3 and 1-4 Rev 4.00 Amendment #2
2 Update the Amendment Record sheet at the front of the manual.
3 Insert this page into the manual after the Amendment Record sheet (page ii).
Manual Amendment ends after the following amended pages
The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
INSTALL_OPS
MANUAL AMENDMENT
Manual: SM34 (AA21-400) Amendment #: 1
Document # SM34\Install_Ops\809-0001 Amendment Date: Jan 18, 2005
Amendment #1 Jan 18, 2005 Page 1
ENG-FORM: 809-0109.DOT
CONFIDENTIAL AND PROPRIETARY TO NORTHERN AIRBORNE TECHNOLOGY LTD.
The purpose of this amendment is to add the Environmental Qualification Form (521-0)
to section 2.5 and to update the section 2.3.4 Cable Wiring statement paragraph 1.
Amendment Instructions:
1 Remove Pages Replace With Pages
2-1, 2-2 and 2-5 Rev 4.00 2-1, 2-2 and 2-5 Rev 4.00 Amendment #1
2 Remove Drawings/Documents (Section 2) Replace or add Drawings/Documents (Section 2)
- AA21\400\521-0 Rev 1.20
Note: Ensure that all drawings are inserted in the order shown on the latest drawing lists.
3 Update the Amendment Record sheet at the front of the manual.
4 Insert this page into the manual after the Amendment Record sheet (page ii).
Manual Amendment ends after the following amended pages
The document reference is online, please check the correspondence between the online documentation and the printed version.
The document reference is online, please check the correspondence between the online documentation and the printed version.
Table des matières
Autres manuels Nat Affichage avionique
Manuels Affichage avionique populaires d'autres marques
Smart Avionics
Smart Avionics PB-4 Manuel utilisateur
Midcontinent
Midcontinent SAM MD302 Manuel
MGL Avionics
MGL Avionics Stratomaster Maxi Single FF-3 Manuel utilisateur
Garmin
Garmin GI 275 Manuel utilisateur
Mid-Continent Instruments
Mid-Continent Instruments 4300 Series Manuel
Avidyne
Avidyne 700-00182 Series Manuel de service
