NARGESA CC60 Manuel utilisateur
INSTRUCTIONS BOOK
PRADA NARGESA, S.L
Ctra. de Garrigàs a Sant Miquel s/n · 17476 Palau de Santa Eulàlia (Girona) Spain
Tel. +34 972568085 · [email protected] · www.nargesa.com
NON-MANDREL TUBE AND PIPE BENDER
CC60
Thank you for choosing our machines
www.nargesa.com
INSTRUCTIONS MANUAL FOR PIPE BENDER CC60 2
CONTENTS
1. MACHINE DETAILS ………....................................................................................................... 3
1.1. Machine Identification………......................................................................................... 3
1.2. Dimensions ................................................................................................................... 3
1.3. Description of the Machine ........................................................................................... 3
1.4. Machine Parts ............................................................................................................. 4
1.5. General Characteristics ….......................................................................................... 5
1.6. Description of the Guards ............................................................................................. 6
2. TRANSPORT AND STORAGE ……....................................................................................... 7
2.1. Transport …................................................................................................................... 7
2.2. Storage Conditions ………..…………............................................................................ 7
3. MAINTENANCE ……................................................................................................................. 8
3.1. Greasing Moving Parts …........................................................................................... 8
4. INSTALLATION AND START UP ……….................................................................................. 9
4.1. Machine Location ….................................................................................................... 9
4.2. Dimensions and Work Area ......................................................................................... 9
4.3. Acceptable External Conditions .................................................................................... 9
4.4. Instructions for Electrical Connection .......................................................................... 10
5. INSTRUCTIONS FOR USE ..................................................................................................... 11
5.1. Assembling the Roller and Counter-Die ............................................................. 11
5.2. Assembling the Radius Arm …………………..……..…………….……………………... 13
5.3. Changing Rotation Direction ………………………………………………………………. 14
5.4. Control Panel .............................................................................................................. 16
5.5. Manual Mode .............................................................................................................. 17
5.6. Angle Correction ……….……………………………………………………..……………. 20
5.7. Radius Arm ………………………………………………………………………………….. 20
5.8. Part Counter ………………………………………………….…………………………...… 21
5.9. Rotation Direction …………………………..………………………………………………. 22
5.10. Adjustment Tables ……………………………………………………………………… 24
5.11. Automatic Mode …………………………………………………………………………... 26
5.12. Remote Service …………………………………………………………………………. 29
5.13. Import/Export Parameters, Materials and Programs ………………………………..… 30
5.14. Touchscreen Calibration ……………………………………………………………...….. 32
6. ACCESSORIES ....................................................................................................................... 33
6.1. Optional Accessories .................................................................................................. 33
7. TROUBLESHOOTING.............................................................................................................. 38
TECHNICAL ANNEXES
INSTRUCTIONS MANUAL FOR PIPE BENDER CC60 3
1. MACHINE DETAILS
1.1. Machine Identification
1.2. Dimensions
Figure 1. Outside Dimensions of Bender CC60
1.3. Description of the Machine
The non-mandrel pipe bender CC60 is a machine specifically designed to bend profiles, mainly metal ones,
of different thicknesses and configurations: pipes, solid profiles, T-profiles, angles...
The bender comes standard with a radius arm that must be used to bend thicker pipes of larger diameters.
Besides standard rollers, PRADA NARGESA manufactures different types of additional rollers for all types
of bending based on the configuration of the material to be worked.
PRADA NARGESA S.L. is not liable for any damages that may be caused due to improper use or
a breach of the safety rules by users.
Make NARGESA
Type Non-Mandrel Pipe Bender
Model CC60
INSTRUCTIONS MANUAL FOR PIPE BENDER CC60 4
1.4. Machine Parts
Roller
Radius arm
Spindle
Drag Clamp
Counter-die
Positioner
CNC Control
Shelving
INSTRUCTIONS MANUAL FOR PIPE BENDER CC60 5
Figure 2. Characteristics plate
1.5. General Characteristics
Reference 100-17-01-001
Engine power 1.1 KW / 1.5 HP
Voltage 230 V Single Phase 50/60 Hz
Automatic rotation speed 0.7 to 4.5 r.p.m.
Intensity 4.5 A
Minimum radius of curvature 3 times the pipe diameter
Maximum radius of curvature 320 mm
Max. cap. round steel pipe 60.3 mm or 2" Schedule-40 or 2" Gas x 4
mm
Max. angle of curvature 180º
Dimensions 600 x 1000 x 1143 mm
Weight 360 Kg
INSTRUCTIONS MANUAL FOR PIPE BENDER CC60 6
Front guard
Rear guard
1.6. Description of the Guards
The gear box and all the gears enabling the machine to operate are inside the main structure which pro-
tects the mechanisms.
Despite the fact the main moving parts are protected by the front cover, special precaution must be taken
when bending to prevent entrapment between the die, counter-die and part.
Figure 3. Mechanism Protection Guards
INSTRUCTIONS MANUAL FOR PIPE BENDER CC60 7
2. TRANSPORT AND STORAGE
2.1. Transport
The machine should be transported as follows:
- Along the bottom at the base of the machine using a forklift or lift truck as indicated in the illustration.
Never raise the machine more than 200 mm off the ground or it may tip over.
Figure 4. Moving the machine
2.2. Storage Conditions
The pipe bender may not be stored anywhere that does not meet the following requirements:
- Humidity of 30% to 95%
- A temperature of -25ºC to 55ºC or 75ºC over periods not to exceed 24 hours (please remember these
temperature are for storage conditions)
- Do not pile machines or place any heavy objects on top
- Do not dismantle for storage
INSTRUCTIONS MANUAL FOR PIPE BENDER CC60 8
ATTENTION: To grease the machine, you must stop the machine and press the “Emergency Stop”
button.
3. MAINTENANCE
3.1. Greasing the Moving Parts
Keeping the moving parts on the machine clean whenever possible is recommended to ensure proper
operation and extend the service life.
To grease the pinions on the CC60, do as follows:
- Remove the front guard and rear guard to access the pinions.
- Apply grease to the teeth of the pinions using a brush or spatula.
- Distribute the grease evenly without creating any excess or accumulation.
- Grease the machine periodically depending on the use. Recommended by the manufacturer: once a year.
INSTRUCTIONS MANUAL FOR PIPE BENDER CC60 9
4. INSTALLATION AND START UP
4.1. Machine Location
Try to position the machine in the proper location so that it does not have to be moved; otherwise, following
the steps described in the transport section (no. 2). Position over a smooth, level surface to prevent vibra-
tions and movements during bending operations.
The machine can be secured with bolts as it comes with a base or pedestal on the bottom with four holes
as shown in the following figure.
Figure 5. Anchoring points on the machine
4.2. Dimensions and Work Area
Take the dimensions, operator work area and the lengths of any materials to be worked into consideration
when positioning the machine.
The pipe bender may be used by a single operator who must stand on one of the two sides of the machine
to control the materials during processing.
Before starting the bending process, the operator shall adjust the roller and counter-die to the material
while the machine is off.
Figure 6. Operator’s work area
4.3. Acceptable External Conditions
- A room temperature of between +5 ºC and +40 ºC without exceeding an average temperature of +35 ºC
over 24 hours.
- Moisture between 30% and 90% without water condensation.
Autres manuels pour CC60
2
Table des matières
Autres manuels NARGESA Matériel de construction
