Nanoxia Deep Silence 4 Manuel utilisateur


EN
I. Introducon
• Specicaons
• Accessories
• Features
II. Installaon Instrucons
1. Installaon of the motherboard
2. Installaon of the power supply
3. Installaon of external drives
3.1 Opcal drives
3.2 Ulizing the external 3.5 inch bay
4. Installaon opons of HDD’s
4.1 Mounng of hard disk drives
4.2 Installaon of a 2.5 inch SSD alongside the HDD cages
4.3 Removing the HDD-cages
5. Removing the front panel
6. Fan assembly
6.1 Front fans
6.2 Fans under the top cover
7. The 2-channel fan control
7.1 Connecng the fans to the fan control
7.2 Operaon of the fan control
8. Installaon of a water cooling soluon
9. The I/O-Panel
10. Connecng the front connectors to the motherboard
10.1 USB 2.0
10.2 USB 3.0
10.3 HD Audio
10.4 AC 97
III. Support
________________________________________________________________02
__________________________________________________________02
________________________________________________________________02
________________________________________________________________03
_________________________________________________________06
___________________________________________________06
______________________________________________________07
________________________________________________07
___________________________________________________07
______________________________________08
_________________________________________09
_______________________________________________09
______________________________10
___________________________________________10
_______________________________________________11
______________________________________________11
_______________________________________________11
_______________________________________________12
________________________________________________12
________________________________12
_____________________________________________13
_______________________________________________13
___________________________________________________________14
___________________________15
____________________________________________________________15
___________________________________________________________15
__________________________________________________________16
______________________________________________________________16
_____________________________________________________________18
01

I. Introduc on
Congratula ons on the purchase of your new Nanoxia Deep Silence 4 mini tower. We are con -
dent that you will be delighted by your new PC case for many years to come.
Nanoxia’s Deep Silence series have been designed and developed by an experienced team of
developers in Germany. The silent op mized PC cases are of the highest quality and combine
the best possible func onality with the highest level of fl exibility.
The Deep Silence 4 Tower is a par cularly compact housing that provides nevertheless su ci-
ent space for high-end graphics cards and current CPU coolers. Due to the modular hard drive
cages, the case o ers maximum versa lity and compa bility, both for water cooling project
and the installa on of high-end systems with air cooling.
Speci ca ons
Dimensions: 380 x 200 x 480 mm (Height x Width x Depth)
Material: 0.6 mm steel
External drive bays: 1 x 5.25 inch (tool-free)
1x 5.25 inch /w 3.5 inch adapter (tool-free)
Internal drive bays: 6 x 3.5/2.5 inch bays (decoupled),
1 x 2.5 inch SSD moun ng holes
Rubber sealings for
tube holes
EPS extension Fan screws Stand-o s for mainboard Screws for mainboard
moun ng
Screws for HDD moun ng Screws for 3.5” moun ng
frame
Moun ng screws for
2.5“HDD/SSD
Moun ng screws for PSU Thumbscrews
Accessories
02

EN
If you are missing any of the items listed above, please contact our customer service
immediately:
support@nanoxia-world.com (Germany and Europe);
support.overseas@nanoxia-world.com (internaonal)
Features:
- Watercooling ready
- Complete customizable soundproong with high quality materials meeng industrial
standards
- Tool-free mounng of opcal drives
- 2 x USB 3.0, 1 x USB 2.0
- 4 Slots for expansion cards
- Max. VGA length: 265 mm (up to 395 mm with the HDD cages removed)
- Room for CPU coolers with a maximum height of up to 160 mm
- Mounng hole for CPU cooler in the motherboard tray
- Cable management with 3 rubberised holes in the motherboard tray
- Stepless 2-channel fan control
- Nanoxia VentCover (noise indulated): 1 x top cover
Noise Insulaon
The Nanoxia Deep Silence 4 has been developed with the aim to oer the buyer a low-noise
case, while at the same me allowing for extremely low system temperatures. The sound insu-
laon design of the Deep Silence 4 is based on mulple interacng design elements:
The most important part is the large scale lining of the case with sound-absorbing insulaon
materials. These materials are manufactured specically to meet the requirements of the
developers of the Nanoxia Deep Silence case series. The insulaon consists of a bitumen fabric
layer and a foam compound that acts equally against airborne sound, while the bitumen fabric
layer specically reduces the vibraonal characteriscs of the case.
Included are special rubber seals which can be used to alternavely close the tube holes above
the rear chassis fan, in case you don’t need to use them.
The removable Nanoxia VentCover masks the 120/140 mm fan hole in the case top. It allows
the user to choose between the least possible noise and improved case venlaon.
03

Another design element for op mum sound insula on is the use a sound-insulated front door.
The door is equipped with sound-absorbing foam.
The hard disk drives are installed on trays which feature rubber grommets that are designed
to absorb any vibra ons caused by the HDDs. The power supply is isolated from the case by a
fl exible rubber framework and also rests on rubber contact points on the bo om of the PSU.
The whole concept of sound proo ng of the Deep Silence 4 meets the highest expecta ons.
Ven la on System
The Deep Silence Nanoxia 4 has an integrated ven la on system consis ng of two 120 mm
Deep Silence fans and a built-in 2-channel fan controller. A total of up to three fans can be
mounted.
The Nanoxia VentCover under the top can be removed at any me and allows the installa on
of a 120 mm or 140 mm fan for op mized heat dissipa on.
The Deep Silence axial fl ow fans have been speci cally op mised for very quiet opera on. The
range of fan speeds and controls was designed to enable each user to adjust the case ven la -
on to their own needs.
All air intake openings (front and bo om) are readily accessible and have easy to clean dust l-
ters. Behind the front cover, an “Easy Access Panel” is located, allowing an easy access to both
the dust lter and the front 120 mm fan.
Standard Equipment:
Front: 1 x 120 mm Nanoxia Deep Silence fan (max. 1,300 rpm)
Rear: 1 x 120 mm Nanoxia Deep Silence fan (max. 1,300 rpm)
Op onal Equipment:
Top cover: 2 x 120/140 mm
Bo om: 1 x 120/140 mm fans (removal of HDD-holder necessary)
04

EN
Watercooling-ready
The Nanoxia Deep Silence 4 like any other Nanoxia case has been prepared for the installaon
of a water cooling system.
Therefore you can install radiators or a compact water cooling soluon behind the front cover.
Front: 120 mm radiator
Behind the front panel, a 120 mm radiator can be mounted. Please note that the upper two
HDD-cages must be removed for this.
If you want to mount a compact water cooling system behind the front, you should check
before the installaon, whether the factory hoses between cooler and radiator are of sucient
length.
Rubber hose guides:
The Deep Silence 4 oers two rubber hose guides, so that the appropriate water cooling com-
ponents can be operated or mounted externally.
On the next pages you can nd some useful ps and explanaons for the opmal use of your
new case and for the installaon of your hardware.
05

II. Installa on Instruc ons
1. Installing the Motherboard
You can mount M-ATX and Mini-ITX motherboards in the Deep Silence 4. In order to ensure an
easy installa on of your motherboard, we suggest the following procedure:
a) Please consult the following charts to
nd your motherboard form factor:
Micro-ATX Mini-ITX
b) A ach the stand-o s according to your
motherboard form factor.
c) A ach the included EPS extension cable
on to your motherboard – do not connect it
to the power supply yet.
06

EN
d) Next you should mount the CPU cooler - for very large CPU coolers, the a achment of the
EPS extension cable a er installa on can be di cult.
e) Now place the motherboard gently inside
the case and lead the EPS extension cable
through the opening provided in the top le
of the mainboard tray.
f) Fix the motherboard to the motherboard tray.
g) A er the installa on of the power supply, you can connect the EPS extension cable to the
EPS-connector on the PSU at the back of the motherboard-tray.
2. Installa on of the power supply
Please install the power supply according
to the diagram below and secure it with
the included PSU screws.
The dust lter at the bo om can
be pulled out for easy cleaning.
3. Installa on of external drives
You can install up to two external drives in the Deep Silence 4. An adapter frame for moun ng
a 3.5 inch drive is included.
3.1 Op cal drives
To install the op cal drives, please remove both side panels. The installa on of op cal drives is
tool-free.
07

Remove the 5.25 inch cover by pulling the
lateral l ng lever cau ously towards you
and take out the cover.
Then loosen the lock on both sides by
dragging the black slider backwards (1).
Then slide the drive into the desired
posi on.
Lock the holder by pushing the slider back
to its original posi on (2).
3.2 U lizing the external 3.5 inch bay
If you for example desire to place a 3.5 inch card reader, you can use the internal adaptor for
this purpose. Please remove the 5.25 inch cover rst. Open the two quick release of the 5.25
inch bay and remove the moun ng frame. Then a ach the card reader in the frame, as shown
below.
Then place the frame with the card reader
back into the slot and lock the quick release.
Finally, a ach the included 3.5 inch front
panel carefully on top of the card reader.
Alterna vely, the adaptor can be used for the installa on of an addi onal 3.5 inch hard drive.
1
2
08

EN
4. Installa on op ons for hard drives
The Deep Silence 4 allows you the decoupled moun ng of six hard disk drives in the partly
modular HDD-cages.
4.1 Moun ng of hard drives
Install the 2.5 or 3.5 inch hard drives in the illustrated moun ng frames. In order to extract the
frame, squeeze the protruding brackets and pull the slide out gently.
To install a hard drive into a bracket insert the disk so that the connectors point to the back and
a ach the hard drive using the screws provided.
For the ng of 3.5 inch hard drives
please use the holes in Figure 4A
For the ng of 2.5 inch hard drives
please use the holes in Figure 4B
To lock the drive, push the bracket with the
drive back installed back into the slot un l
the bracket is re-engaged.
Abb. 4A Abb. 4B
09
Table des matières
Autres manuels Nanoxia Ordinateur de bureau


















