NANO F6 Manuel utilisateur
F6mist eliminator
user guide
about us
Experience.
Our team is comprised of and supported by individuals spanning
all disciplines from research & development, engineering &
manufacturing, markeng & sales and service & support. Our
backgrounds are in air and gas puricaon and our experience
in this eld spans a wide range of industries. We combine
this knowledge and experience to ensure our products and
services are designed and provided to meet the objecves and
expectaons of you - our Customer.
We recognize that our Customers are not only our valuable
distribuon partners who sell and support our products or
the machine builders who depend on them as protecon for
their equipment. They are the contractors who install them,
the manufacturers who use them in their processes and the
service people who maintain them. At nano we have developed
our products, packaging and support materials to ensure they
exceed all of our Customers’ expectaons.
Customer.
Service.
At nano we recognize that world-class customer service is
the most important component to any successful business.
Your business needs to exceed your customers’ expectaons
to stand out from your competors and our service must
posively impact your business so you can be successful in
doing so. Our commitment is simple… we will stand behind
our products and ensure that our customer service is unrivaled
in the industry.
Experience. Customer. Service.
table of contents
secon descripon page
1
1.1 general informaon 4
1.2 manufacturers details and support
1.3 document introducon
5
1.4 warranty guidelines
1.5 packaging
1.6 damage to packaging
1.7 general safety
1.8 intended use 6
1.9 personnel
1.10 safe handling 7
1.11 technical descripon 8
1.12 product contents
2
2.1 technical specicaon 9
2.2 ow rates 10
2.3 correcon factors
2.4 product dimensions 11
2.5 product overview 12
2.6 typical system layout 13
2.7 site locaon 14
2.8 mist eliminator housing installaon 15
2.9 element installaon 16
3
3.1 shutdown, maintenance & element replacment
procedure 17
3.2 cleaing
18
3.3 daily checks
3.4 servicing guidelines
3.5 service schedule and breakdown 19
3.6 replacement elements and spares 20
3.7 service record 21
44.1 trouble shoong 22
4
mist eliminator
F6
This manual is copyrighted, all rights reserved. It may not, in whole or in part, be copied, photocopied,
reproduced, translated, or reduced to any electronic medium or machine readable form without prior
consent in wring from nano-puricaon soluons. It may not be distributed through the internet or
computer bullen board systems without prior consent from nano-puricaon soluons.
©2017 nano-puricaon soluons.
range: F6 mist eliminators
models: MEL 0250 - 5000
doc no: 17-110-8001
issue: 002
NOTES: highlight important secons of
informaon where parcular care and
aenon should be paid.
CAUTIONS: indicate any situaon or
operaon that may result in potenal
damage to the product, injury to the user,
or render the product unsafe.
nano-puricaon soluons ltd
address: dukesway
team valley trading estate
gateshead
ne11 opz
united kingdom
telephone: +44 (0) 191 497 7700
internet: www.n-psi.co.uk
e-mail: [email protected]
1.1 general information
1.2 manufacturers details and support
nano-puricaon soluons llc
address: 5509 david cox road
charloe, nc 28269
usa
telephone: 704.897.2182
fax: 704.897.2183
internet: www.n-psi.com
e-mail: [email protected]
annotations
nano-puricaon soluons
address: unit 8b
188 bunng road, unit 8B
st catharines, ontario
l2m 3y1
canada
telephone: 704.897.2182
internet: www.n-psi.com
e-mail: [email protected]
5
mist eliminator
F6
This manual provides factory prescribed installaon and maintenance procedures for a F6 mist eliminator.
The procedures illustrated in this document are only to be performed by authorized personnel. For
further informaon regarding the procedures outlined in this document contact the manufacturer before
proceeding. Be sure to read this document carefully before aempng to install or operate the mist
eliminator. This document should be permanently available at the mist eliminator installaon site and be
kept in an easily accessible place alongside the mist eliminator.
All products are supplied with an 18 months manufacturer’s warranty from the date of shipment from the
factory or 12 months from date of installaon/start up, whichever occurs rst and installed and maintained
in accordance with the manufacturers guidelines. Only genuine service parts should be used and no
modicaons made.
All products are securely fastened to skid in horizontal posion with inlet and outlet anges covered. Dier-
enal pressure indicator and automac oat drain (where applicable) will be shipped loose for installaon
the eld.
Check immediately to establish whether damage has occurred to the external packaging and if the damage
extends to the product inside. If there is damage to a product, contact the relevant supplier immediately.
In no circumstances must a damaged product be used in operaon. Using damaged products
can lead to irreparable funconal faults or cause serious physical harm.
1.3 document introduction
1.4 warranty guidelines
1.5 packaging
1.6 damage to packaging
For your own safety, when carrying out work on this product, all relevant naonal safety
regulaons must be complied with relang to pressurized and electrical systems.
No modicaons must be made to the product. Any modicaons may reduce the operaonal safety of the
product and invalidate the manufacturer’s warranty. This could potenally result in damage to the product
and serious personal injury.
1.7 general safety
WARNING: This product can expose you to chemicals including lead, which is known to the State
of California to cause cancer and/or birth defects or other reproducve harm. For more informa-
on, go to www.P65Warnings.ca.gov.
6
mist eliminator
F6
The mist eliminator is exclusively intended for the treatment of compressed air or some gases (consult facto-
ry) with the removal of bulk water, oil and solid maer constuents.
The mist eliminator must be operated only in accordance with the data on the rang plate. Any operaons
that do not comply with those stated on the product rang label will render the warranty void.
This product is only designed to operate at pressures stated in the technical specicaon. Do
not exceed the maximum working pressure.
Only authorized, competent and trained personnel are permied to work on this product. This user guide
is intended solely for such personnel and is to be used only as a reference; it should not be used to replace
convenonal training.
1.8 intended use of the product
1.9 personnel
Ensure that mist eliminator has been evaluated and its materials of construcon deemed suita-
ble and safe for the type of gas being ltered.
Adhere strictly to rules for safe handling of gas to be ltered.
7
mist eliminator
F6
Please ensure the relevant safe engineering pracces and handling procedures are employed when handling,
installing and operang this product. Ensure that the equipment is depressurized prior to carrying out any of
the scheduled maintenance instrucons specied within this user guide.
A suitable liing aid must be used to minimize the risk of physical injury or damage to the
product.
In no circumstances must a damaged product be used in operaon. Using damaged products
can lead to irreparable funconal faults or cause serious physical harm.
1.10 safe handling
Do not remove, repair or replace any item on the mist eliminator housing while it is under
pressure. Any faults or defects that could aect safety must be corrected before using the unit.
Do not loosen ange bolts while the mist eliminator is under pressure.
Do not operate if there is a leak in mist eliminator housing. Immediately remove pressure and
repair leak.
Standard mist eliminator housings may contain combusble substances (grease) and are there-
fore not suitable for oxygen and oxygen rich service. Mist elimintors for oxygen service may be
available upon request.
8
mist eliminator
F6
The mist eliminator is a heavy duty coalescing lter designed to remove oil, parculate and water from
compressed air.
1.11 technical description
1.12 product contents
when ordering a F6 mist eliminator you will receive the following;
• 1 x F6mist eliminator housing with element installed
• 1 x dierenal pressure indicator
• 1 x automac oat drain as appropriate
• 1 x user guide
9
mist eliminator
F6
2.1 technical specification
specicaons
design operang pressure range 20 to 150 psig
recommended operang temperature range 68 to 180°F
(20 to 82°C)
design operang temperature range 35 to 248°F
(2 to 120°C)
inial dierenal pressure less than 0.5 psig
recommended pressure dierenal for element change 1.0 psid
condensate drain(s) included automac oat
dierenal pressure indicator standard on all models
ASME VII & U stamp standard
10
mist eliminator
F6
model nominal ow connecon
scfm Nm3/hr inlet & outlet
MEL 0250 250 425 2” NPT
MEL 0500 500 850 3” NPT
MEL 1000 1000 1699 3” NPT
MEL 1250 1250 2124 3” Flg
MEL 1500 1500 2549 4” Flg
MEL 3000 3000 5097 4” Flg
MEL 5000 5000 8495 6” Flg
2.2 flow rates
operang
pressure
psig 20 30 40 60 80 100 120 150
barg 1.4 2.1 2.8 4.1 5.5 6.9 8.3 10.3
correcon factor 0.35 0.44 0.54 0.70 0.84 1.00 1.10 1.25
2.3 correction factors
Ce manuel convient aux modèles suivants
7
Table des matières
Manuels Matériel de DJ populaires d'autres marques
thomann
thomann Stairville DJ Lase 40-G MK-III Manuel utilisateur
Eagletone
Eagletone 6 Eyes Flower Manuel utilisateur
EuroLite
EuroLite FLD-1508 Manuel utilisateur
Technical Pro
Technical Pro LG8xSEA Manuel utilisateur
JB Systems
JB Systems Lounge Laser DMX Manuel utilisateur
Lightmaxx
Lightmaxx Vega Halo 90 Manuel utilisateur
Elation
Elation FUZE WASH Z350 Manuel utilisateur
Maverick
Maverick MK3 WASH Manuel utilisateur
Infinity
Infinity TF-260C7 Fresnel Manuel utilisateur
Chauvet
Chauvet EVE E-50Z Manuel utilisateur
Eliminator Lighting
Eliminator Lighting E 138 Manuel utilisateur
EuroLite
EuroLite Mini Multicolor LED Flashing Light SC Manuel utilisateur