Page | 4
Site Setup Page
The Site Setup page allows you to link the EM12 controls to the controls in your DSP
configuration file. The following controls are available for linking.
•Faders 1-24 (Banks A, B, C, and D)
•Low Shelf 1-24 (Banks A, B, C, and D)
•Hi Shelf 1-24 (Banks A, B, C, and D)
•Mid EQ 1-24 (Banks A, B, C, and D)
•Auto button 1-24 (upper button above each fader) (Banks A, B, C, and D)
•Mute button 1-24 (lower button above each fader) (Banks A, B, C, and D)
•Meter 1-24 (lower led above each fader) (Banks A, B, C, and D)
•HG 1-24 (upper led above each fader) (Banks A, B, C, and D)
•System Buttons 1-12
•Status 1-4
Choose a DSP from the dropdown list to load the default configuration for that DSP.
Site Setup Page – BSS Soundweb London
Choose BSS to load the default settings for a BSS DSP. The default settings set the DSP ID to 1
and the DSP and Communication type (found on the Network page). Note: Refer to the Audio
Architect help file for instructions on how to obtain the correct Object ID’s and SV ID’s from
your DSP file.
