Mychef Snack Bakershop Manuel utilisateur
2
INDEX
1. INTRODUCTION ...........................................................................................................3
2. MYCHEF SMART CONTROL CONFIGURATION ..........................................................4
2.1. Creating a new user .............................................................................................4
2.2. Wi-Fi connectivity ................................................................................................5
2.3. Linking the device ................................................................................................7
2.4. Control Panel........................................................................................................9
3. GOOGLE HOME SETUP AND VOICE ASSISTANT .....................................................12
3.1. Synchronizing computers to Google Home......................................................12
3.2. Voice commands for oven control....................................................................15
3.3. Adding automated routines...............................................................................17
4. ANNEXES....................................................................................................................19
ANNEX 1: Support functions.........................................................................................19
1.1. Reset Wi-Fi settings.......................................................................................19
1.2. Show MAC address ........................................................................................19
1.3. Unlink the "Mychef Control" service..............................................................19
1.4. Desktop application for intelligent control ...................................................20
ANNEX 2: Table of states..............................................................................................21
ANNEX 3: Recipes .........................................................................................................21
3
1. INTRODUCTION
This manual has been prepared in order to provide reliable information and help for
the use of the web application that controls the Mychef Bakershop convection oven
and its link with the Google Assistant and the Google Home application.
The following document is divided into two parts, the first part dedicated to the
configuration of the computer to be able to control it from any device with access to a
web browser, and the second part focused on the synchronization of the control of the
oven by voice commands with the help of Google Home.
Before any configuration or use of the control system, it is necessary to
read this manual carefully and completely.
4
2. MYCHEF SMART CONTROL CONFIGURATION
2.1. Creating a new user
The first step to configure the remote control is to create a user, with which the
different ovens to be controlled will be linked later.
Create a user through the following link or QR code:
https://mychef-432df.firebaseapp.com/
1
Once in the authentication panel, select "Create account" to create a new user
account.
Note: the password must contain at least 6 characters.
To link a device (mobile phone, tablet or computer) it is first necessary to set up a Wi-
Fi connection in the oven. The following section (2.2 Wi-Fi Connectivity) explains in
detail how to set up this configuration.
This web address has the functionality to send notifications when the
cooking of the different linked ovens is finished, so that, if you want to
enjoy this service, you have to give permission for the sending of pop-ups
from this address.
1
It is recommended to use the Google Chrome browser for better performance.
Figure 2: Authentication panel.
Figure 1: New user creation
form.
5
2.2. Wi-Fi connectivity
2
Once the oven is connected to the power outlet, it can be viewed as a Wi-Fi network
from any device (mobile phone, tablet or computer).
The Wi-Fi network will appear with the name "Mychef" followed by a number in
parentheses (the MAC address of the device).
This Wi-Fi network will then be selected on the device with which we want to link the
oven. Once the Wi-Fi network is selected, enter the password 123456789 and wait for
a configuration web portal to open automatically
3
.
2
You can reset your Wi-Fi network settings at any time. See ANNEX 1.1.
3
If the configuration portal does not open automatically, open a web browser (Google Chrome
is recommended) from a device connected to the Wi-Fi network and enter the following IP
address in the browser: 192.168.4.1.
Figure 3: Access point of the oven
from Windows.
6
In this configuration web portal you will enter the data of your usual Wi-Fi network and
the one you want to connect the oven to the internet (SSID).
In the field "Mychef login email" you must enter the user name that was created
previously (
4
2.1. Creating a new user)
It is important to write down the MAC
5
address that appears in the different points of
the configuration, since this is unique for each device and will be necessary to link the
equipment to the remote control. We recommend copying the number after the title
"MAC Address:" so you can paste it later.
4
If for any reason an invalid user is entered, it is possible to reset this configuration. See
ANNEX 1.1.
5
If the MAC address of the equipment has not been noted, it can be displayed in the control
panel of the oven once the Wi-Fi network has been set up. See ANNEX 1.2.
Figure 4: The Wi-Fi network settings screen
from different devices.
7
Once all the fields have been completed, you should select the "Save" button to save
the changes and start the connection.
It is important that you connect to a Wi-Fi network with a 2.4GHz frequency
band, as 5GHz networks are not compatible with Smart Control
functionality.
Once the Wi-Fi network is configured, it is important to wait a few minutes
until the Wi-Fi network disappears (Mychef + MAC address), if this does
not happen it means that the configuration data entered to authenticate
the Wi-Fi network is not correct, then the process must be started again.
2.3. Linking the oven to the device (mobile phone, tablet or computer)
Once an Internet connection has been established,
6
the Wi-Fi network will no longer
be visible. The next step will be to link our oven to the remote control. To do so, visit
the following web address: https://mychef-432df.firebaseapp.com/ or QR code, log in
with the user created in section 2.1. and linked to the oven in section 2.2.
If this is the first time you are linking a device, you will see the button combination
shown in Figure 5.
To add a new device, select the "Add new device" button and fill in the form in Figure 6
with a name for the device (which will serve to identify it) and the MAC address
7
of the
oven that we have previously copied.
Finally, we select the "Add device" button at the end of the form to add the remote
control of the oven to our device (mobile phone, tablet or computer).
6
See section 2.2. to configure the Internet connection.
7
The MAC address consists of six two-character blocks that can be either a number from 0 to
9 or a letter from A to F. If the MAC address of the equipment has not been noted, it can be
displayed on the control panel of the oven. See ANNEX 1.2.
8
If all the previous steps have been carried out correctly, the control panel of the oven
will appear with the different buttons and text boxes to display and change the
different parameters that are configured in the linked equipment, as well as the actual
values of temperature, humidity and cooking time.
It should be noted that when the user makes a change in this control
system there is a delay between the database being updated and the
change being sent to the equipment.
Figure 6: Form for adding a
new device.
Figure 5 Session started without any
linked device.
9
2.4. Control Panel
Figure 7 shows the control panel for the ovens linked to the user account.
The functionality of each panel element is explained below.
Figure 5: Control panel detail
10
Block
Function
Description
A
Device selection box
In this selection box, a list of all devices linked to the user account
will appear.
B
On/Off button
Equipment on/off button.
C
Start/Stop button
On/off and start/stop button for the oven.
D
Door status indicator
Indicates whether the door is open or closed.
E
Equipment status indicator
It indicates the different states of the equipment, see ANNEX 2.
F
Wi-Fi indicator
Indicates by a percentage the strength of the Wi-Fi signal.
G
Phase 1 button
Selecting this button redirects the front panel of the oven to phase
1 and displays the cooking parameters for this phase. This phase is
always on.
H
Phase 2 button/indicator
Selecting this button redirects the front panel of the oven to phase
2, activates it if it is disabled, and displays the cooking parameters
for this phase. If the button text appears as if it were disabled, it
means that the phase is not active.
I
Phase 3 button/indicator
Selecting this button redirects the front panel of the oven to phase
3, activates it if it is disabled, and displays the cooking parameters
for this phase. If the button text appears as if it were disabled, it
means that the phase is not active.
J
Checkbox phase activation
Deselect if you want to deactivate a phase. Phase 1 is always
active.
K
Input/indicator target cooking
time of the oven (Set Point)
Allows you to enter the desired temperature value in the range
[30,300] ºC for manual cooking or indicates the target temperature
value for a given recipe.
L
Input/target moisture indicator
of the oven (Set Point)
Allows you to enter the desired humidity value in the range
[-100,100]% for manual cooking or indicates the target humidity
value for a given recipe.
M
Input/indicator target cooking
time of the oven (Set Point)
Allows you to enter the desired cooking time value in the range [0-
5940] minutes for manual cooking or indicates the target cooking
time value for a given recipe.
N
Real oven temperature indicator
(Real Point)
Indicates the real time temperature value of the oven's cooking
chamber.
O
Real oven humidity indicator
(Real Point)
Indicates the real time humidity value of the oven cooking
chamber.
P
Real oven cooking time indicator
(Real Point)
Indicates the value of the cooking time that has passed since the
start of the cooking process.
Q
Fan speed button
Fan speed selection button, can be low speed (Slow) or high speed
(Fast).
R
Recipe selection box
A list of all recipes entered by the user will appear in this selection
box.
S
“Add Recipe" button
Button to add a new recipe to the user's recipe list. See ANNEX 3.
T
“Edit Recipe" button
Button for editing the cooking parameters of the recipe selected in
the "recipe selection box" (N). See ANNEX 3.
Table des matières
Manuels Télécommande populaires d'autres marques
Panasonic
Panasonic EUR7622KB0 Manuel utilisateur
Bang & Olufsen
Bang & Olufsen Beo4 Manuel utilisateur
Sunwave Tech.
Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur
Multiplex
Multiplex PROFI TX 9 Manuel utilisateur
One Remote
One Remote RMB4 Manuel utilisateur
FUTABA
FUTABA 9ZAP - PART2 Manuel utilisateur
