My Water Filter ULTRAPURE Manuel utilisateur
ULTRAPURE ARAGON 10” TRIPLE BENCHTOP
WATER FILTER WITH PH NEUTRALISATION AND
SEDIMENT PROTECTION
Thank You for trusting us with your Water Filtration needs.
Please read and follow the steps below on setting up your Product.
Ensure you check you have received ALL the correct components before you
call & arrange the plumber or any installation just in the unexpected case that
you have a missing part.
If you need any help, please call us at 1800-769-300 or contact us through our
website at www.mywaterfilter.com.au/contacts/ or email us at customerservice@
mywaterfilter.com.au
INSTALLATION INSTRUCTION
CREATE THE BEST WATER YOU CAN
MY WATER FILTER INSTALLATION INSTRUCTION
PARTS
Housing
Spout
Outlet
Connector
Base
Joiner
Diverter Valve
23 mm x 21 mm
Adapter
Inlet
Connector
Hose
Threaded Join
and O-ring
(inside here)
Cartridge
(inside here)
MY WATER FILTER INSTALLATION INSTRUCTION
Things you will need:
üSpanner
üThread Tape
2 Easy Steps to Install:
1. Install system
2. Flush system & cartridges - Now Ready to use.
NOTE: DO NOT FLOW ANY WATER THROUGH THE SYSTEM OR THE
CARTRIDGES UNTIL THE CORRECT FLUSHING PROCEDURE HAS
BEEN DONE.
Take some time to clear any items out of the way to ensure you have a
safe, clear area to install the water filter. Ensure there are no trip hazards or
anything that can create harm in the work area.
Unpack and check that you have received your product in good condition. If
it has been damaged in transit, please do not attempt to install or assemble
the unit. Alert us immediately or as soon as possible, so we can provide the
necessary assistance.
BEFORE YOU START
MY WATER FILTER INSTALLATION INSTRUCTION
1. Assess the location where the benchtop water filter will be placed,
Preferably, this must be near the faucet on the sink or the benchtop
surrounding the sink.
2. U n s c rew a n d r e m ove t h e existing aerator off your faucet spout to
expose the thread.
MY WATER FILTER INSTALLATION INSTRUCTION
4. Then check there is a rubber washer inside the diverter and tighten the
diverter onto the double male thread adapter until tight & sealed. A
good seal also allows the water filter to be more responsive to the tap,
stopping & starting the water flow. You may require a tool to tighten
properly to be totally sealed with no leaks.
The diverter must be tightened tight to pull the diverter together to
make it seal. You may use plumbers thread tape if required to help
make a good seal on the threads as we do not want any water leaking
from this point, but only use thread tape if required as thread tape can
sometimes stop the diverter been tightened fully, the diverter must be
tight to pull it together to seal it well.
3. The diverter valve that comes with the system has a 21-millimeter
female thread connection. If your faucet has a 21-millimeter male
thread, ensure there is a rubber washer inside the diverter and simply
connectbyscrewingthedivertervalvestraightontoyourfaucetthread.
However, if your faucet spout has a female thread connection, use
the double male to male adaptor included with the system, simply
connect the double male to male adaptor onto the tap spout thread
first, ensuring there is a rubber washer to fit up into the tap spout
thread to seal.
MY WATER FILTER INSTALLATION INSTRUCTION
1. Fold a towel and place it on the area you are working on. This will help
with any water spillage or leak that might come from the connections
that will be removed.
2. Turn off the laundry cold water washing machine tap and disconnect
the cold water hose.
NOTE: If your kitchen faucet doesn’t have a 21-millimeter male thread,
or a 23-millimeter female thread, or there is no suitable adapter for you
then you can install the benchtop water filter in your laundry. You will
require the correct parts for this.
The benchtop water filter units do not come with these laundry adaptor
connectors. This must be purchased separately from the website of
My Water Filter if required. Please call our customer service hotline for
assistance.
MY WATER FILTER INSTALLATION INSTRUCTION
3. Unpack the Easy Fit Laundry Connector 3/4” Male x 3/4” Female x 1/4”
Side Female Connection and ball valve.
NOTE: The benchtop water filter units do not come with these laundry
adaptor connectors. This must be purchased separately from the
website of My Water Filter if required. Please call our customer service
hotline for assistance.
4. Insert the rubber washer inside the 3/4” Easy Fit Laundry Connector.
Wrap thread tape around the 3/4” male threaded end of the laundry cold
water tap. Wrap the 3/4” male threaded end of the Easy-Fit Laundry
Connector with thread tape. Screw the 3/4” female end of the Easy-Fit
Laundry Connector onto the laundry cold water tap thread.
Hand tighten then tighten firmly using a tool or spanner. Avoid over-
tightening as this might squash the rubber washer and cause water
flow restriction.
Make sure the side threaded hole on the Easy-Fit Laundry Connector
faces outward as this is where the on/off ball valve will be connected.
Screw the washing machine hose back onto the 3/4” male threaded
end of the Easy-Fit Laundry Connector, then tighten firmly by hand.
MY WATER FILTER INSTALLATION INSTRUCTION
6. Once connected, Do Not turn on the water yet. Look at the flushing
procedures as indicated in How to Flush your Benchtop Filter.
PLEASE NOTE: You MUST Flush your water filter as indicated in the appropriate
flushing instructions for your water filter.
5. Wrap thread tape around the 1/4” male threaded end of the on/off ball
valve.
Screw the on/off ball valve into the threaded 1/4” thread on the side of
the laundry connector.
Once connected turn on the water and check for any leaks. Once sealed,
cut the end off the water supply tube squarely near the diverter you are
not going to use.
Connect the water hose to the ball valve.
Autres manuels pour ULTRAPURE
1
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels My Water Filter Système de filtration d'eau
My Water Filter
My Water Filter MWF BIG BLUE WHOLE HOUSE WATER FILTRATION... Manuel utilisateur
My Water Filter
My Water Filter TWIN BIG BLUE WHOLEHOUSE WITH UV GUARD Manuel utilisateur
My Water Filter
My Water Filter ULTRAPURE Manuel utilisateur
My Water Filter
My Water Filter Xstream 7 Manuel utilisateur
My Water Filter
My Water Filter ULTRAPURE Aragon Manuel utilisateur
My Water Filter
My Water Filter ULTRAPURE Aragon Manuel utilisateur
Manuels Système de filtration d'eau populaires d'autres marques
Wisy
Wisy LineAir 100 Manuel utilisateur
Schaffner
Schaffner Ecosine FN3446 Series Manuel d'utilisation
Pentair
Pentair FLECK 4600 SXT Guide de l'utilisateur
H2O International
H2O International H20-500 Manuel utilisateur
Renkforce
Renkforce 2306241 Manuel utilisateur
Neo-Pure
Neo-Pure TL3-A502 Manuel utilisateur
