This document is an integral part of the product and is intended for the
benefit of all persons using the screen (users + installation and mainte-
nance operators).
All the instructions listed in this document comply with the EU Machin-
ery Directive and provides for the correct use, installation and mainte-
nance of the screen, with the aim of avoiding damage to persons and to
the product.
MV LINE would like to congratulate you on your purchase of this insect
screen.
This guide will help you appreciate the advantages of this screen
and assist you during the use, installation and maintenance phas-
es. The company reserves the right to implement partial or complete
modifications without prior notice and declines any responsibili-
ty in relation to any possible inaccurate or incomplete information.
This guide is the property of MV LINE.
Reproduction (even partial) of this document is expressly prohibited
without prior authorisation from MV LINE.
INTENDED USE
The insect screen is intended, as its name would suggest, to act as a
protective screen against intrusive insects in the room or area where it
has been located. Any other use shall be considered improper. The man-
ufacturer will not be held responsible for damage arising from improper,
erroneous and irrational use.
PACKAGING, MOVEMENT AND TRANSPORT
• The screens are packaged in transparent bags, cardboard and poly-
ethylene wrapping which protect the unit during transport.
• The screen can be moved by hand and does not require any special
equipment to facilitate movement.
• Please take every precaution to avoid any possible damage to the
screen.
• After removing the packaging, check that the screen is in perfect
condition and that there are no visibly damaged parts.
If in doubt, do not use the screen and contact the supplier.
ATTENTION!!!
Packaging materials must not be left within the reach of children.
USE
Avoid use (opening and closing of the screen) by children.
MAINTENANCE
Regularly clean the magnetic parts using a damp cloth.
• In the case of wear and tear, lubricate the bearings using a silicone
spray.
• All extraordinary maintenance operations must be carried out by suit-
ably qualified personnel.
• Spare-parts are available from retailers or directly from MV LINE.
DISASSEMBLY AND DECOMMISSIONING
Before disassembling the screen, please consult the instructions manu-
al. The screen does not contain dangerous materials. There are no spe-
cific guidelines for decommissioning or disposal.
GUARANTEE
Do not disassemble apparently malfunctioning parts or accessories on
your own initiative, please contact the retailer who shall organise tech-
nical support and spare-parts, failure to do so will aect the conditions
of the guarantee. The guarantee includes the complete or partial re-
placement of the unit or parts in the case of functional issues arising
from manufacturing defects and is exempt from damage and deteriora-
tion caused by the customer.
In order to use the guarantee you must copy the INSECT SCREEN CODE
as displayed on the label attached to the screen housing into the white
space below (see fac-simile fig. 1) and attach the relevant proof of pur-
chase (receipt or invoice).
This screen is guaranteed by MV LINE for a period of 24 months.
Code
The fluidity in the sliding of the handlebar during automatic closing is
adjusted directly in the factory by loading the spring to a predefined
number of turns
After the installation, if the insect screen stops before the total closure,
or in case of fast closing, it is possible to set the loading of the spring, by
operating in the hole of the upper end-cap with the key provided, as shown
in the picture:
When you turn the key in the hole, you should run about fifteen full turns
at a time then verify the proper functioning.
In case of use of cordless drill, use a reduced speed.
Note: the operation should be made only by qualified personnel.
EXTERNAL SPRING LOAD ADJUSTMENT Insert the key in the hole to adjust
spring loading.
In case of fast rewinding of
the net, just turn the key
towards sign “-”.
In case of slow rewinding
or if the insect screen does
not close completely, just
turn the key towards sign
“+”.
-+
HOW TO OPEN THE INSECT SCREEN
Turn the small handle in the direc-
tion of the engraved arrow. Slide
the handlebar and return the han-
dle to its original position to lock it.
Find and copy the code
displayed on the label
attached to the screen
housing as shown here.
PRODUCT INFORMATION
USE • MAINTENANCE • GUARANTEE
Declaration of Performance
The undersigned MV LINE s.p.a.
Via Umbria - Lotto 69 70021 Acquaviva delle Fonti (BA), Italy
Hereby declares that the product:
Wind resistance: Class 4
Complies to the following EU directives (including all applica-
ble modifications):
Machinery Directive 89/392/CEE and Norm UNI EN 13561 Ap-
pendix ZA.1
Year of CE marking: 2017.
Acquaviva delle Fonti, 01.01.2017
Signature
Paolo Montanaro
(CEO)
IRENE DOUBLE
EN 13561
06
MV LINE s.p.a.
Via Umbria - Lotto 69 70021
Acquaviva delle Fonti (BA), Italy
Product: FLYSCREEN
Class: 4
