Musical Fidelity X-AS100 Manuel utilisateur

Instructions For Use. Page 1

X-AS100

POWER AMPLIFIER

INSTRUCTIONS FOR USE

Thank you for purchasing the Musical Fidelity

X-AS100 Power Amplifier. Used properly and

carefully, it should give you many years of outstanding

musical reproduction.

Aesthetically and electronically the X-AS100 matches

perfectly with the X-P100 Preamplifier, X-RAY CD player

and X-PLORA tuner. Together, they form one of the

finest hi-fi systems available.

The X-AS100 has been designed to be switched on

continuously. The PSU should be positioned as far

away from the X-AS100 as possible. We suggest that the

PSU is placed on the floor near the mains outlet.

Dust regularly with a soft duster or soft brush but be

careful when using cleaning or polishing agents - they may

harm the surface finish.

If you have any questions about anything in your

audio system, please consult your dealer who is there

to help and advise you.

Instructions For Use. Page 2

X-AS100

PLEASE READ

IMPORTANT!

This unit is supplied in the UK with a mains lead fitted with a moulded 13 amp

plug. If, for any reason, you need to cut off this plug, please observe the following

safety precautions. Please dispose of the cut-off plug safely. It must not be plugged

into a mains power supply.

The wires in the mains lead supplied with this appliance are coloured in ac-

cordance with the following code:

Green and yellow..............Earth

Blue...............................Neutral

Brown................................Live

WARNING - This appliance must be earthed

As the colours of the wires of the mains lead of this appliance may not corre-

spond with the coloured markings identifying the terminals in your plug, proceed as

follows:

•The wire which is coloured green-and-yellow must be connected to the termi-

nal in the plug which is marked with the letter E or coloured green or green-and-

yellow, or by the earth symbol .

•The wire which is coloured brown must be connected to the terminal which is

marked with the letter L or coloured red.

•The wire which is coloured blue must be connected to the terminal which is

marked with the letter N or coloured black.

•If connecting to a BS1363 plug, a 10 amp fuse must be used.

WARNING - Speaker Terminals

In order to comply with BSEN60-065 safety regulations, the 4mm. banana plug

holes have been fitted with plastic blanking pieces. Removal of these will invalidate

any safety approval of this unit.

WARNING - Radio Frequency Interference (RFI)

This hi-fi product has been tested to ensure that its operation will not be ad-

versely affected by normal background levels of RFI. It is possible that if this prod-

uct is subjected to abnormally high levels of RFI the unit may be susceptible and not

perform as expected. In the unlikely event of this happening on a regular basis,

please contact Musical Fidelity's service department.

The unit has also been tested to ensure that it does not radiate excessive levels

of RFI that could affect other pieces of electronic or electrical equipment.

The electronics in modern hi-fi equipment is complex and hence may be dam-

aged by lightning. It is possible that during electrical storms the operation of some

equipment may be adversely affected. For complete protection of your hi-fi system

during such storms, mains plugs and aerial leads should be disconnected.

Always ensure that when disconnecting and reconnecting your hi-fi equipment the mains

supply is switched off.

Instructions For Use. Page 3

X-AS100

CONNECTIONS AND FACILITIES

89 10 11

34 5 6 7

BACK VIEW

3Right channel input

4Right channel loop output

5Mono / Stereo button

6Left channel input

7Left channel loop output

8Right loudspeaker output

9Right PSU input

10 Left PSU input

11 Left loudspeaker output

FRONT VIEW

1Left channel power indicator

2Right channel power indicator

Instructions For Use. Page 4

X-AS100

INSTALLATION

INSTALLATION PRECAUTIONS

Your new X-AS100 is designed and built to provide trouble-free performance but as

with all electronic devices it is necessary to observe a few precautions. Please ensure

that you have complied with them before you connect any AC power to your ampli-

fier. Retain this guide for future reference.

þHeed all warnings on the back of

the unit.

þþ Place your X-AS100 where there

is adequate ventilation.

þþ Only connect the unit to a power

supply of the type marked on the back

of the unit.

þþ Position the power supply lead

and signal interconnect leads where

they are not likely to be walked on or

trapped by items placed on them.

ýý Do not use near water.

ýý Do not place the amplifier near

direct heat sources such as radiators

or other equipment that produces

heat.

ýý Do not remove any covers or try

to gain access to the inside. The war-

ranty will be invalid if the unit has

been tampered with. There are no

user adjustments within. Refer all

service work to an authorised Musical

Fidelity agent.

ýý There are fuses in the X-AS100.

In the unlikely event that one blows,

take your X-AS100 to your audio

dealer. Do NOT try to replace the fuse

yourself or you will invalidate the

warranty.

BEFORE YOU SWITCH ON

You should make all connections to the X-AS100 before switching on.

Follow this routine before you listen for the first time, and each time you change any

connections.

1Check all the inputs and outputs to the X-AS100.

2Then check again.

3Turn the volume control to nil.

4Now you can switch on the power and carefully advance the volume to

the level you want and enjoy the music.

Instructions For Use. Page 5

X-AS100

LOUDSPEAKERS

To get a realistic soundstage and full dynamic range from your X-AS100, use it with

loudspeakers of a reasonable efficiency. An average rating for a loudspeaker these days is

about 88dB. This should mean that for an input of 1 watt, measured at 1 metre distance,

the sound pressure output will be 88dB. This is the minimum efficiency that we recommend

you should use. However, in our opinion, even this is not enough to allow for an adequate

dynamic range. For proper realistic dynamic range we recommend a loudspeaker efficiency

of about 94-95dB such as the Kelly Transducers range. These are an ideal match for the

X-AS100 and are highly recommended.

CONNECTIONS

All connections should be made with the power OFF before the mains lead is

plugged in and the unit switched on.

The X-AS100 is a stereo amplifier which can if required be mono'd for use in passive

bi-amping systems.

The X-AS100 can be used with a preamplifier or any line level source which has a

volume control. We highly recommend the matching X-P100 or Nu-Vista Preamps avail-

able from Musical Fidelity as an excellent choice.

How to connect your X-AS100 for Normal Stereo use

Connect the Left and Right outputs from your pre-amp or other line level source to

the phono inputs on the back panel marked as Left and Right Line Inputs. For the best

results we recommend that you use Musical Fidelity X-LINX "no-nonsense" interconnect

cables for this connection.

Connect your loudspeakers to the loudspeaker terminals situated on the back panel

marked as Left and Right Loudspeaker Outputs. Please refer to diagram below.

Once these connections are made, plug in the IEC type mains lead and switch on the

unit.

Right Speaker Left Speaker

To Preamp

Right output To Preamp

Left output

CONNECTIONS

Instructions For Use. Page 6

X-AS100

PASSIVE BI-AMPING

The X-AS100 has both 'Loop Out' connections and a Mono/Stereo button to allow

flexible use in various Bi-amping combinations. In these combinations the X-AS100 is used

in conjunction with either another X-AS100 or compatible amplifiers with a gain of 33

such as the X-A50 or X-A200 monoblocs from Musical Fidelity. A pair of bi-wireable

speakers is required (and the bi-wire links must be removed) so that one amplifer channel

can drive the treble unit (tweeter) and another channel can drive the bass unit (woofer).

Please refer to the two examples below.

Example 1. Two X-AS100s

In this example, one X-AS100 is used to drive the left speaker whilst a second

X-AS100 drives the right speaker.

The Right output of your preamp is connected to the first X-AS100 to either the Left

or Right Line Input (it does not matter which). The Mono/Stereo Button is then

pressed in for Mono operation. The Right Louspeaker output is now wired to the Bass

unit terminals of the first speaker with a normal speaker wire pair. The Left Loudspeaker

output is now wired to the Treble unit terminals of the first speaker, again, using a normal

pair of speaker wires. This process is now repeated for the other X-AS100. Again the

Mono/Stereo button must be pressed in for mono operation. The Left output of the

preamp is connected to either of the Line level inputs of the second X-AS100. Then as

before one channel of the X-AS100 drives the bass unit of the second speaker and the

other channel drives the treble unit. See diagram below:

CONNECTIONS

Right Speaker

Left Speaker

To Preamp

Left line output

To Preamp

Right line output

Mono buttons 'IN'

for mono operation.

Speaker Bi-Wire

links removed.

Instructions For Use. Page 7

X-AS100

Example 2. One X-AS100 with a pair of X-A50s or X-A200s

In our second example, a pair of X-A200s are used to drive the bass unit (woofer) of

each channel whilst an X-AS100 is used to drive the treble unit (tweeter) of each channel.

The X-AS100 is connected to a preamp in the normal way with a pair of phono leads. Then

the line input of each X-A200 (or X-A50) is connected to a 'Loop Out' of the X-AS100 with

another set of phono leads.The X-AS100's Mono/Stereo button must be out for stereo

operation. The X-A200s in this example drive the left and right bass units whilst the

X-AS100 drives the left and right tweeter.

CONNECTIONS

If you have any questions regarding passive bi-amping please contact your authorised

Musical Fidelity dealer who should be able to help and advise you.

EXTERNAL POWER SUPPLY

We recommend that the Power Supply Unit be positioned on the floor as far away

from the X-AS100 as possible. This ensures that there is no magnetic interaction between

the X-AS100 and the power supply unit thus giving best performance.

The X-AS100 has been designed so that it may be left switched on indefinately if

desired.

WARNING - Heat

When in use the X-AS100 gives off heat from its casework.

Never put anything on top of your X-AS100.

Always ensure that the unit has adequate ventilation.

Right Speaker Left Speaker

To Preamp

Left line output

To Preamp

Right line output

Mono/Stereo button 'out'

for Stereo operation

Instructions For Use. Page 8

X-AS100

TROUBLESHOOTING

If none of these actions effect a cure, please contact your dealer, or an authorised Musical

Fidelity service agent. Remember, never open the case of the X-AS100 yourself, as this will

invalidate the guarantee.

Basic troubleshooting of an amplifier is similar to troubleshooting of any other

electrical or electronic equipment. Always check the most obvious possible causes

first. To give you a few ideas of what to look for, check the following:

Problem Probable Cause Remedy

No power when POWER

is pressed Mains plug not inserted

correctly Plug in securely

PSU unit not connected

to main unit Plug PSU umbilical lead

into back of main

X-AS100 unit

No sound Volume control is set

to minimum on Preamplifier Turn up the volume

Mute is selected on

Preamplifier Press mute button on

remote control

Preamplifier not connected

to Power amplifier Check phono cable

connection between units

Speakers are not connected,

or are connected incorrectly Check speaker cables

Sound is not precise,

lacking in bass and

stereo image

Speakers are connected

out of phase Make sure that both

speakers are connected

correctly

Instructions For Use. Page 9

X-AS100

SPECIFICATIONS

Musical Fidelity reserves the right to make improvements which may result in specification or

feature changes without notice.

X-AS100 POWER AMPLIFIER

Power output 100 watts per channel, 8Ω

THD < 0.005% at 1kHz

< 0.04% 20Hz - 20kHz unweighted

< 0.003% 20Hz - 20kHz 'A' weighted

Frequency response 10Hz - 70kHz +1dB

Input sensitivity 900mV

S/N ratio > 106dB unweighted (ref 100W)

> 117dB ‘A’ weighted (ref 100W)

> 86dB unweighted (ref 1W)

> 97dB 'A' weighted (ref 1W)

Channel separation > 90dB 20Hz-20kHz

Power consumption 450 watts (maximum)

Dimensions 230 x 110 x 330mm (W x H x D)

Width and height include feet,

depth include terminals

Standard accessories X-AS100 power supply unit

IEC type mains lead

X-AS100-98-1

Table des matières

Autres manuels Musical Fidelity Amplificateur

Musical Fidelity

Musical Fidelity M6sPRE Manuel utilisateur

Musical Fidelity

Musical Fidelity M6PRX CRPS Manuel utilisateur

Musical Fidelity

Musical Fidelity X-LP2 Manuel utilisateur

Musical Fidelity

Musical Fidelity M8 Series Manuel utilisateur

Musical Fidelity

Musical Fidelity M8s 700m Manuel utilisateur

Musical Fidelity

Musical Fidelity X-P200 Manuel utilisateur

Musical Fidelity

Musical Fidelity Nu-Vista M3 Manuel utilisateur

Musical Fidelity

Musical Fidelity X-CAN V8P Manuel utilisateur

Musical Fidelity

Musical Fidelity KW250S Manuel utilisateur

Musical Fidelity

Musical Fidelity M250 Manuel utilisateur

Musical Fidelity

Musical Fidelity Tri-Vista 300 Manuel utilisateur

Musical Fidelity

Musical Fidelity X-PRE Manuel utilisateur

Musical Fidelity

Musical Fidelity F225 Manuel utilisateur

Musical Fidelity

Musical Fidelity A300 Manuel utilisateur

Musical Fidelity

Musical Fidelity NU-VISTA 300 Manuel utilisateur

Musical Fidelity

Musical Fidelity Supercharger 550K Manuel utilisateur

Musical Fidelity

Musical Fidelity X-A200 Manuel utilisateur

Musical Fidelity

Musical Fidelity Nu-Vista 800 Manuel utilisateur

Musical Fidelity

Musical Fidelity A1 Integrated Manuel utilisateur

Musical Fidelity

Musical Fidelity A5 Manuel utilisateur

Musical Fidelity

Musical Fidelity X-Pre V3 Manuel utilisateur

Musical Fidelity

Musical Fidelity E30 Manuel utilisateur

Musical Fidelity

Musical Fidelity kW 750 Manuel utilisateur

Musical Fidelity

Musical Fidelity A3.2 Manuel utilisateur

Manuels Amplificateur populaires d'autres marques

ASTRO

ASTRO HVO V40 P Manuel utilisateur

Marantz

Marantz SUPERSCOPE BLA-545 Instructions de montage

NAD

NAD CI980 Manuel utilisateur

Technics

Technics SE-CH770 Manuel utilisateur

Harman Kardon

Harman Kardon HK6300 Manuel utilisateur

NAD

NAD T975 Manuel utilisateur

McIntosh

McIntosh MA6850 Manuel utilisateur

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuel utilisateur

Viatron

Viatron Autrix Manuel utilisateur

GME

GME GA9800 Manuel utilisateur

Atlas

Atlas CP700 Manuel utilisateur

Roland

Roland KC-1000 Manuel utilisateur

Pyle

Pyle PFMRA350BW Manuel utilisateur

Advantage

Advantage S-250 Manuel utilisateur

IRT Electronics

IRT Electronics DVA-3007 Manuel utilisateur

Dimavery

Dimavery BA-100 Series Manuel utilisateur

Sony

Sony XM-S400D Manuel utilisateur

Schertler

Schertler ROY X Manuel utilisateur