Murphy POWERVIEW PV450 Manuel utilisateur
00-02-0732
2016-02-26
Section 78
PowerView®
Model PV450
Installation and Operation Manual
In order to consistently bring you the highest quality, full featured products, we reserve the right to change our
specifications and designs at any time. The latest version of this manual can be found at www.fwmurphy.com.
BEFORE BEGINNING INSTALLATION OF THIS MURPHY
PRODUCT:
•Read and follow all installation instructions.
•Please contact Enovation Controls immediately if you have
any questions.
•A visual inspection of this product for damage during
shipping is recommended before installation.
•It is your responsibility to ensure that qualified mechanical
and electrical technicians install this product.
Contact Enovation Controls Technical Service if you have any
questions or concerns at: +1 918-317-4100.
Table of Contents
Hardware Installation.................................................................................................................1
Inspecting Package Contents ...........................................................................................1
Dash-Mounted Installation.................................................................................................1
Wiring Instructions ....................................................................................................................4
Single Engine.......................................................................................................................4
PVA Gages ...........................................................................................................................5
NMEA Gages........................................................................................................................6
Dual Engine Gages .............................................................................................................7
USB Wiring...........................................................................................................................8
Analog Video .......................................................................................................................9
No Video Wiring.................................................................................................................10
Pin Specifications for Deutsch DT04-6P Style Connections ......................................11
PV450 Features and Operations ............................................................................................12
Setting Up your PV450 Display for the First Time...............................................................13
Product Features......................................................................................................................15
Power Up ............................................................................................................................15
Main Menu ..........................................................................................................................15
Gauge Display ...................................................................................................................16
Engine Diagnostics...........................................................................................................18
Fault Code Popups ...........................................................................................................19
User Settings .....................................................................................................................20
Utilities ................................................................................................................................24
Specifications ...........................................................................................................................26
Addendum.................................................................................................................................27
How to Install a Configuration from a USB Drive for the PV450 ................................27
(THIS PAGE INTENTIONALLY LEFT BLANK)
Section 78 00-02-0732
2016-02-26 - 1 -
Hardware Installation
The following instructions will guide you through installing the PV450 display.
Inspecting Package Contents
Before attempting to install the product, it is recommended that you ensure all parts are
accounted for and inspect each item for damage (which sometimes occurs during shipping).
The items included in the box are:
Installation kit – P/N 78-00-0782 includes:
•4 ea. machine screws and flat washers
•4 Nylock nuts
•1 small bag
Dash-Mounted Installation
Tools needed.
•Drill with 5/32” size bit
•Jig Saw or tool that cleanly cuts through dash material.
•Wrench or socket
Preparing the Dash
Determine the location of the PowerView 450 in the dash. Use the Installation Template
(included at the end of the manual) as a guideline to cut a hole in the dash to the specified
dimensions. Drill holes where indicated on the template for the mounting screws.
NOTE: When using the paper template from the manual, please be aware that if
you downloaded this document from the FW Murphy website, the pdf file may not
automatically print to scale. When submitting the file for print, you will need to
select “None” for Page Scaling. Check the accuracy of the printed template by
verifying the measurements labeled on the template are correct.
If this manual was supplied with your product, the template will be correct.
Section 78 00-02-0732
2016-02-26 - 2 -
Front Installation of Display
1. Place the back side of the display through the opening in the dash.
2. Use the 4 screws to line up the unit with the drilled holes.
3. Push the unit through the opening and screws through the drilled holes until the back of
the case is flush.
4. Use the Nylock nuts provided to tighten unit to the dash. Use the appropriate wrench or
socket to tighten. Torque lock nuts to 8-10 inch pounds.
Back Installation of Display
1. Cut the dash to allow for the display. Ensure the materials are available to properly
secure the unit within the dash. Torque the 6-32 Nylock nuts to 5 inch pounds.
2. Place the display behind dash and line up the four mounting holes on the display with
the holes in dash.
3. Install four bolts and tighten nuts.
Gimbal Mounted Installation
If it is desired to gimbal-mount the PV450, the gimbals can be sourced from Ram Mounting
Systems, Inc. at www.ram-mount.com
The RAM parts, drawings and models are accompanied by a ordering guide at
http://www.rammount.com/SupportCenter/GlossaryofTerms/tabid/149/Default.aspx
The PV450 has a matching bolt pattern for the RAM Diamond base with 9/16” ball
(P/N RAM-A-238).
Section 78 00-02-0732
2016-02-26 - 3 -
Dimensions for Installation
Section 78 00-02-0732
2016-02-26 - 4 -
Wiring Instructions
The following illustrations are examples of various typical quick-connect options for setup.
Wiring harnesses are sold separately.
WARNING: Failure to install the unit per the specified wiring diagrams may cause
damage to the unit. DO NOT connect power to the video ground. Warranty is void
for damage caused by incorrect wiring.
Single Engine
Section 78 00-02-0732
2016-02-26 - 5 -
PVA Gages
WARNING: Failure to install the unit per the specified wiring diagrams may cause
damage to the unit. DO NOT connect power to the video ground. Warranty is void
for damage caused by incorrect wiring.
Section 78 00-02-0732
2016-02-26 - 6 -
NMEA Gages
Table des matières
Autres manuels Murphy Automobile électronique
