Muratec MFX-1300 Manuel utilisateur
For
MFX-1300/1700
Quick Reference
Sending a fax
Sending a fax using the ADF.........page
2
Sending a fax using the FBS glass....page
3
Broadcast........................page
4
Cancel sending a fax...............page
5
Making a copy
Basic copy.......................page
6
Sort copy .......................page
7
Enlarged/Reduced copy.............page
8
Using the Bypass tray.............page
10
Just in case
Clearing original document jams.....page
12
Clearing printout jams.............page
14
Function table
...........page
16
2
Enter the fax number using the numeric keypad
or
Press the one-touch key*1
or
Press
SPEED DIAL/TEL INDEX
and
enter the three-digit identifier for the speed-dial
number using the numeric keypad
*1
: When you press a one-touch key, you do not need
to press
START
.
You can set up to 50 sheets of letter-, legal- or
half letter-sized documents in the ADF at one time.
Sending a fax
2
Set the document in the
ADF face up and adjust
the document guides.
Adjust resolution and contrast,
if necessary.
3
Enter the fax number.
4
Press
START
.
Sending a fax using the ADF
1
Press
COPY/FAX
to change
to Fax mode.
3
If there's a document in the ADF,
remove it.
1
Press
COPY/FAX
to change to Fax mode.
2
Open the platen cover.
3
Place the document on the FBS glass
face down and align it to the right
front corner.
Close the platen cover.
Enter the fax number.
5
Regarding the ways to enter the fax
number, refer to step 3 on page 2.
Press
DOCUMENT SIZE
to
select the document size.
Adjust resolution and contrast,
if necessary.
4
6
Press
START
.
Sending a fax using the FBS glass
If you want to send more pages,
place the next page, then press
NEXT DOC
.
When you have finished scanning all pages,
press
START
.
4
2
Set the document in the
ADF face up, or on the
FBS glass face down.
Adjust the document type and
the contrast, if necessary.
5
Press
START
.
Enter the fax number.
To add more fax numbers,
repeat step 3 and 4.
4
Broadcast
Enter the fax number using the numeric keypad
or
Press the one-touch key*
1
or
Press
SPEED DIAL/TEL INDEX
and enter the three-digit identifier
for the speed-dial number using the numeric keypad
*1
: When you press a one-touch key, you do not need to press
START
.
1
Press
COPY/FAX
to change
to Fax mode.
3
Press
BROADCAST
.
5
4
Press
STOP
.
Press to see the individual numbers
within the broadcast.
Press or until you find the number
you want to cancel.
Press or to scroll through
currently stored commands.
2
Cancel sending a fax
If you want to cancel the command shown,
press
CANCEL, CANCEL
.
If you want to cancel another command, go back to step 2.
3
1
Press
COMM.CANCEL/CONFIRM.
6
5
Press
START
.
2
Set the document in the
ADF face up, or on the
FBS glass face down.
3
Adjust the following,
if necessary.
• Select the document size by
pressing the
DOCUMENT SIZE
.
• Select the document type and
the contrast.
4
Enter the number of copies
using the numeric keypad.
Press
COPY RESET
to clear
the previously entered copy
settings.
Making a copy Basic copy
1
Press
COPY/FAX
to change
to Copy mode.
Helpful Tip
If you want to stop copying,
press
STOP
.
7
Sort copy
Set the document in
the ADF face up.
Adjust resolution and contrast,
if necessary.
1
Press
COPY/FAX
to change
to Copy mode.
2
Press
SORT
to turn the sort
setting to on or off.
When the sort setting is On, the LED on
SORT
glows.
5
Press
START
.
4
Enter the number of
copies using the
numeric keypad.
Helpful Tip
The sort setting is set to On for the default setting.
To change the default setting:
1. Press Program key,
B
, 3, 0, 6,
ENTER
.
2. Press or until the setting you want appears.
3. Press
ENTER
to save the setting.
3
121
112
223
33
3
123
123
123
12
Non-sort:
Sort:
3
If you selected non-sort copies,
you can use the FBS glass.
8
Helpful Tip
If you want to reduce or enlarge your document
automatically to fit on the paper size you selected,
program the following setting in advance:
1. Press Program key, B, 3, 0, 4,
ENTER
.
2. Select "Enlarge/Reduce" by using or of
the cursor key.
3. Press
ENTER
.
If you want enlarged copies,
use the FBS glass.
Set the document in the
ADF or on the FBS glass.
Adjust the document type and the
contrast, if necessary.
1
Enlarged/Reduced copy
Enter the document size
by pressing the
DOCUMENT
SIZE
.
2
3
Fixed ratio
1. Choose the desired ratio by using
or of the cursor key.
You can choose from:
•
50%
•
64% (Letter -> Half-letter)
•
78% (Legal -> Letter)
•
129% (Half-letter -> Letter)
•
200%
9
Enter the number of copies
using the numeric keypad.
4
Press
START
.
5
Direct
1. Press #.
2. Enter your desired ratio (50 to 200)
using the numeric keypad.
3. Press # again.
Adjust by 1 percent increments
1. Press
ZOOM
to turn the
ZOOM
light on.
2. Adjust the ratio by 1 percent increments
using or of the cursor key.
You can set the ratio between 50% and 200%.
10
1
Press
COPY/FAX
to change
to Copy mode.
Using the Bypass tray
Hopper
Flapper release lever
3
Open the bypass tray on the right
side of your machine.
Pull out the hopper of the bypass tray
and pull the flapper release lever.
2
Set the document in the ADF face up,
or on the FBS glass face down.
4
Place the paper on the bypass tray
face down.
Adjust the paper guide to fit the
paper. Then push back the flapper
release lever.
Autres manuels pour MFX-1300
4
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Muratec Photocopieuse
Muratec
Muratec MFX-2590 Manuel utilisateur
Muratec
Muratec MFX-C2828 Manuel utilisateur
Muratec
Muratec MFX-1300 Manuel utilisateur
Muratec
Muratec MFX-3530 Manuel utilisateur
Muratec
Muratec MFX-3530 Manuel utilisateur
Muratec
Muratec MFX-C2280 Manuel utilisateur
Muratec
Muratec MFX-C2700 Manuel utilisateur
Muratec
Muratec MFX-C2280 Manuel utilisateur
Muratec
Muratec MFX-3510 Manuel utilisateur
Muratec
Muratec MFC-C2828 Manuel utilisateur
Muratec
Muratec MFX-1500 Manuel utilisateur
Muratec
Muratec MFX-C2280 Manuel utilisateur
Muratec
Muratec MFX-C2280 Manuel utilisateur
Muratec
Muratec MFX-C3035 Manuel utilisateur
Muratec
Muratec MFX-3510 Manuel de service
Muratec
Muratec MFX-3510 Manuel utilisateur
Muratec
Muratec MFX-C2280 Manuel de la liste des pièces
Muratec
Muratec MFX-C2828 Manuel utilisateur
Muratec
Muratec MFX-C2828 Manuel de la liste des pièces
Muratec
Muratec MFX-3530 Manuel utilisateur
