Muratec MFX-3550 Manuel utilisateur

Muratec MFX-3550

User Guide

English

This user’s guide is provided for information purposes only. All information included herein is subject to

change without notice.

Muratec is not responsible for any direct or indirect damages, arising from or related to use

of this user’s guide.

zMuratec and the Muratec logo are trademarks of Murata Machinery Limited.

zPCL and PCL 6 are trademarks of Hewlett-Packard Company.

zMicrosoft, Windows, and Windows Vista are either registered trademarks or trademarks of Microsoft

Corporation.

zPostScript 3 is a trademark of Adobe System, Inc.

zUFST® and MicroType™ are registered trademarks of Monotype Imaging Inc.

zTrueType, LaserWriter and Macintosh are trademarks of Apple Computer, Inc.

zAll other brand or product names are trademarks of their respective companies or organizations.

REV. 2.00

e 1 of 1Co

8/4/2009htt

://downloadcenter.samsun

.com/content/UM/200907/20090721152022250/EN/en

lish

...

Safety information

These warnings and precautions are included in order to prevent injury to you and others, as well as

preventing any potential damage to your machine. Be sure to read and understand all of these

instructions before using the machine.

Use common sense for operating any electrical appliance and whenever using your machine. Also, follow

all warnings and instructions marked on the machine and in the accompanying literature. After reading

this section, keep it in a safe place for future reference.

IMPORTANT SAFETY SYMBOLS

This section explains the meanings of all icons and signs in the user's guide. These safety symbols are

in order, according to the degree of danger.

Explanation of all icons and signs used in the user’s guide:

OPERATING ENVIRONMENT

Warning

Caution

Warning Hazards or unsafe practices that may result in severe personal injury or death.

Caution Hazards or unsafe practices that may result in minor personal injury or property

damage.

Do not attempt.

Do not disassemble.

Do not touch.

Unplug the power cord from the wall socket.

Make sure the machine is grounded to prevent electric shock.

Call the service center for help.

Follow directions explicitly.

Do not use if the power cord is damaged

or if the electrical outlet is not grounded.

This could result in electric shock or fire.

Do not bend, or place heavy

objects on the power cord.

Stepping on or allowing the

power cord to be crushed by

a heavy object could result in electric

shock or fire.

Do not place anything on top of the

machine (water, small metal or heavy

objects, candles, lit cigarrettes, etc.).

This could result in electric shock or fire.

Do not remove the plug by

pulling on the cord; do not

handle the plug with wet

hands.

This could result in electric shock or fire.

If the machine gets overheated, it

releases smoke, makes strange noises, or

generates an odd odor, immediately turn

off the power switch and unplug the

machine.

This could result in electric shock or fire.

e 1 of 4Safet

information

8/4/2009htt

://downloadcenter.samsun

.com/content/UM/200907/20090721152022250/EN/en

lish

...

OPERATING METHOD

Caution

INSTALLATION / MOVING

Warning

Caution

During an electrical storm or for a

period of non-operation,remove the

power plug from the electrical outlet.

This could result in electric shock or

fire.

If the plug does not easily enter the

electrical outlet, do not attempt to force it in.

Call an electrician to change the electrical

outlet, or this could result in electric shock.

Be careful, the paper output area is hot.

Burns could occur.

Do not allow pets to chew on the AC

power, telephone or PC interface cords.

This could result in electric shock or fire.

If the machine has been dropped, or if the

cabinet appears damaged, unplug the machine

from all interface connections and request

assistance from qualified service personnel.

Otherwise, this could result in electric shock or

fire..

If the machine does not operate properly

after these instructions have been followed,

unplug the machine from all interface

connections and request assistance from

qualified service personnel.

Otherwise, this could result in electric shock

or fire.

If the machine exhibits a sudden and distinct

change in performance, unplug the machine from

all interface connections and request assistance

from qualified service personnel.

Otherwise, this could result in electric shock or fire.

Do not forcefully pull the

paper out during printing.

It can cause damage to the

machine.

When printing large quantities, the bottom

part of the paper output area may get hot.

Do not allow children to touch.

You may be burned.

Be careful not to put your

hand between the machine

and paper tray.

You may get injured.

When removing jammed paper, do not

use tweezers or sharp metal objects.

It can cause damage to the machine.

Do not block or push objects into the

ventilation opening.

This could result in elevated component

temperatures which can cause damage or

fire.

Do not allow too many papers to stack up in the

paper output tray.

It could cause damage to the machine.

Use care to avoid paper cuts when

replacing paper or removing jammed

paper.

You may get hurt.

This machine's power interception device is the

power cord.

To switch off the power supply, remove the power cord

from the electrical outlet.

Do not place the machine in an area with dust, humidity or water leaks.

This could result in electric shock or fire.

When moving the machine, turn

the power off and disconnect all

cords; then lift the machine

Do not put a cover over the machine or place it

in an airtight location, such as a closet.

If the machine is not well-ventilated, this could

e 2 of 4Safet

information

8/4/2009htt

://downloadcenter.samsun

.com/content/UM/200907/20090721152022250/EN/en

lish

...

MAINTENANCE / CHECKING

Caution

SUPPLY USAGE

Caution

with at least two people.

The machine could fall, causing human injury

or machine damage.

result in fire.

Do not place the machine on an unstable

surface.

The machine could fall, causing human injury

or machine damage.

Make sure you plug the power cord into a

grounded electrical outlet.

Otherwise, this could result in electric shock or fire.

The machine should be connected to the

power level which is specified on the label.

If you are unsure and want to check the

power level you are using, contact the

electrical utility company.

Do not overload wall outlets and extension

cords.

This can diminish performance, and could result in

electric shock or fire.

Use only No.26 AWG[a]or larger,

telephone line cord, if necessary.

Otherwise, it can cause damage to the

machine.

Use the power cord supplied with your machine

for safe operation. If you are using a cord which is

longer than 2 meters (79”) with a 140V machine,

then the gauge should be 16 AWG or larger.

Otherwise, it can cause damage to the machine,

and could result in electric shock or fire.

[a] AWG: American Wire Gau

Unplug this product from the wall outlet

before cleaning the inside of the machine.

Do not clean the machine with benzene,

paint thinner or achol; do not spray water

directly into the machine.

This could result in electric shock or fire.

Keep cleaning supplies away

from children.

Children may get hurt.

When you are working inside the machine

replacing supplies or cleaning the inside,

do not operate the machine.

You may get injured.

Do not disassemble, repair

or rebuild the machine by

yourself.

It can cause damage to the

machine. Call a certified technician when

the machine needs repair.

Keep the power cable and the contact surface of the

plug clean from dust or water.

This could result in electric shock or fire.

To clean and operate the machine,

strictly follow the user's guide provided

with the machine.

Otherwise, it can cause damage to the

machine.

Do not remove any covers or guards that are

fastened with screws.

The machine should only be repaired by Samsung

service technician.

Do not disassemble the toner cartridge.

Toner dust can be dangerous to humans.

When storing supplies such

as toner cartridges, keep

them away from children..

Toner dust can be dangerous

to humans.

Do not burn any of the supplies such as Using recycled supplies, such as toner,

e 3 of 4Safet

information

8/4/2009htt

://downloadcenter.samsun

.com/content/UM/200907/20090721152022250/EN/en

lish

...

toner cartridge or fuser unit.

It can cause an explosion or fire.

can cause damage to the machine.

In case of damage due to the use of

recycled supplies, a service fee will be

charged.

When changing the toner cartridge or removing

jammed paper, be careful not to let toner dust touch

your body or clothes.

Toner dust can be dangerous to humans.

e 4 of 4Safet

information

8/4/2009htt

://downloadcenter.samsun

.com/content/UM/200907/20090721152022250/EN/en

lish

...

Regulatory information

This machine is designed for our sound environment and certified with several regulatory statements.

LASER SAFETY STATEMENT

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, chapter 1

Subchapter J for Class I(1) laser products, and elsewhere is certified as a Class I laser product

conforming to the requirements of IEC 825.

Class I laser products are not considered to be hazardous. The laser system and printer are designed

so there is never any human access to laser radiation above a Class I level during normal operation,

user maintenance or prescribed service condition.

WARNING

Never operate or service the printer with the protective cover removed from Laser/Scanner

assembly. The reflected beam, although invisible, can damage your eyes.

When using this product, these basic safety precautions should always be followed to reduce risk of

fire, electric shock, and injury to persons:

TAIWAN ONLY

e 1 of 12Re

ulator

information

8/4/2009htt

://downloadcenter.samsun

.com/content/UM/200907/20090721152022250/EN/en

lish

...

OZONE SAFETY

MERCURY SAFETY

PERCHLORATE WARNING

This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the

product sold or distributed ONLY in California USA.

Perchlorate Material - special handling may apply.

See www.dtsc.ca.gov/hazardouswaste/perchlorate. (U.S.A. only)

POWER SAVER

RECYCLING

CHINA ONLY

CORRECT DISPOSAL OF THIS PRODUCT (WASTE

ELECTRICAL & ELECTRONIC EQUIPMENT)

(Applicable in the European Union and other European countries with

separate collection systems)

During normal operation, this machine produces ozone. The ozone produced does not

present a hazard to the operator. However, it is advisable that the machine be operated

in a well ventilated area.

If you need additional information about ozone, request your nearest Samsung dealer.

Contains Mercury, Dispose According to Local, State or Federal Laws.(U.S.A. only)

This printer contains advanced energy conservation technology that reduces power

consumption when it is not in active use.

When the printer does not receive data for an extended period of time, power

consumption is automatically lowered.

ENERGY STAR and the ENERGY STAR mark are registered U.S. marks.

For more information on the ENERGY STAR program see http://www.energystar.gov

Recycle or dispose of the packaging material for this product in an environmentally

responsible manner.

e 2 of 12Re

ulator

information

8/4/2009htt

://downloadcenter.samsun

.com/content/UM/200907/20090721152022250/EN/en

lish

...

CORRECT DISPOSAL OF BATTERIES IN THIS PRODUCT

(Applicable in the European Union and other European countries with

separate battery return systems.)

RADIO FREQUENCY EMISSIONS

FCC Information to the User

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

zThis device may not cause harmful interference, and

zThis device must accept any interference received, including interference that may cause

undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

zReorient or relocate the receiving antenna.

zIncrease the separation between the equipment and receiver.

zConnect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

zConsult the dealer or experienced radio TV technician for help.

Canadian Radio Interference Regulations

This digital apparatus does not exceed the Class A limits for radio noise emissions from digital

This marking on the product, accessories or literature indicates that the product and its

electronic accessories (e.g. charger, headset, USB cable) should not be disposed of

with other household waste at the end of their working life. To prevent possible harm

to the environment or human health from uncontrolled waste disposal, please separate

these items from other types of waste and recycle them responsibly to promote the

sustainable reuse of material resources.

Household users should contact either the retailer where they purchased this product,

or their local government office, for details of where and how they can take these

items for environmentally safe recycling.

Business users should contact their supplier and check the terms and conditions of the

purchase contract. This product and its electronic accessories should not be mixed with

other commercial wastes for disposal.

This marking on the battery, manual or packaging indicates that the batteries in this

product should not be disposed of with other household waste at the end of their

working life. Where marked, the chemical symbols Hg, Cd or Pb indicate that the

battery contains mercury, cadmium or lead above the reference levels in EC Directive

2006/66. If batteries are not properly disposed of, these substances can cause harm to

human health or the environment.

To protect natural resources and to promote material reuse, please separate batteries

from other types of waste and recycle them through your local, free battery return

system.

Change or modifications not expressly approved by the manufacturer responsible for compliance

could void the user's authority to operate the equipment.

e 3 of 12Re

ulator

information

8/4/2009htt

://downloadcenter.samsun

.com/content/UM/200907/20090721152022250/EN/en

lish

...

apparatus as set out in the interference-causing equipment standard entitled “Digital Apparatus”,

ICES-003 of the Industry and Science Canada.

Cet appareil numérique respecte les limites de bruits radioélectriques applicables aux appareils

numériques de Classe A prescrites dans la norme sur le matériel brouilleur: “Appareils Numériques”,

ICES-003 édictée par l’Industrie et Sciences Canada.

UNITED STATES OF AMERICA

Federal Communications Commission (FCC)

Intentional emitter per FCC Part 15

Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices),

operating in the 2.4 GHz/5 GHz Band, may be present (embedded) in your printer system. This

section is only applicable if these devices are present. Refer to the system label to verify the

presence of wireless devices.

Wireless devices that may be in your system are only qualified for use in the United States of

America if an FCC ID number is on the system label.

The FCC has set a general guideline of 20 cm (8 inches) separation between the device and the

body, for use of a wireless device near the body (this does not include extremities). This device

should be used more than 20 cm (8 inches) from the body when wireless devices are on. The

power output of the wireless device (or devices), which may be embedded in your printer, is well

below the RF exposure limits as set by the FCC.

This transmitter must not be collocated or operation in conjunction with any other antenna or

transmitter.

Operation of this device is subject to the following two conditions:(1) This device may not cause

harmful interference, and(2) this device must accept any interference received, including

interference that may cause undesired operation of the device.

FCC Statement for Wireless LAN use:

RFID (RADIO FREQUENCY INTERFACE DEVICE)

RFID operation is subject to the following two conditions:(1) this device may not cause interference,

and (2) this device must accept any interference, including interference that may cause undesired

operation of the device. (U.S.A., France, Taiwan only)

TAIWAN ONLY

Wireless devices are not user serviceable. Do not modify them in any way. Modification to a

wireless device will void the authorization to use it. Contact manufacturer for service.

While installing and operating this transmitter and antenna combination the radio frequency

exposure limit of 1mW/cm2 may be exceeded at distances close to the antenna installed.

Therefore, the user must maintain a minimum distance of 20cm from the antenna at all times.

This device cannot be colocated with another transmitter and transmitting antenna.

e 4 of 12Re

ulator

information

8/4/2009htt

://downloadcenter.samsun

.com/content/UM/200907/20090721152022250/EN/en

lish

...

Table des matières

Autres manuels Muratec Imprimante tout-en-un

Muratec

Muratec F-525 Manuel utilisateur

Muratec

Muratec MFX-2590 Manuel utilisateur

Muratec

Muratec MFX-1330 Manuel utilisateur

Muratec

Muratec MFX-1430 Manuel de l'opérateur

Muratec

Muratec MFX-3050 Manuel utilisateur

Muratec

Muratec MFX-2830 Manuel utilisateur

Muratec

Muratec OFFICEBRIDGE EXPANSION KIT (OB450) Manuel utilisateur

Muratec

Muratec MFX-2500 Manuel utilisateur

Muratec

Muratec MFX-2350 D Manuel utilisateur

Muratec

Muratec MFX-C2700 Manuel utilisateur

Muratec

Muratec MFX-2550 Guide Manuel utilisateur

Muratec

Muratec MFX-1300 Manuel utilisateur

Muratec

Muratec F-305 Manuel utilisateur

Muratec

Muratec MFX-2830 Fiche technique

Muratec

Muratec MFX-2570 Manuel de service

Muratec

Muratec MFX-3510 Manuel utilisateur

Muratec

Muratec MFX-3590 Manuel utilisateur

Muratec

Muratec F-315 Manuel d'installation et d'exploitation

Muratec

Muratec MFX-C3400 Manuel utilisateur

Muratec

Muratec FAX SCANNER Manuel utilisateur

Muratec

Muratec MFX-2500 Manuel d'installation et d'exploitation

Muratec

Muratec MFX-1450 Guide de démarrage rapide

Muratec

Muratec MFX-4550 Manuel utilisateur

Muratec

Muratec MFX-2570 Manuel utilisateur

Manuels Imprimante tout-en-un populaires d'autres marques

Triumph Adler

Triumph Adler DC 2016 Manuel

Epson

Epson WorkForce WF-2510 Guide de l'utilisateur

Epson

Epson Stylus Scan 2000 Manuel d'installation et d'exploitation

Epson

Epson PictureMate Snap PM 240 Mode d’emploi

Konica Minolta

Konica Minolta bizhub C35 Manuel utilisateur

Brother

Brother MFC-J430w Manuel utilisateur

Konica Minolta

Konica Minolta BIZHUB 558 Manuel utilisateur

Lexmark

Lexmark MX710 Series Manuel

Brother

Brother MFC-9760 Manuel utilisateur

Lexmark

Lexmark XC8155 Manuel utilisateur

Lexmark

Lexmark X642E Manuel utilisateur

Sharp

Sharp MX-2310U Mode d’emploi

Aficio

Aficio 200 Manuel utilisateur

Canon

Canon ImageCLASS 2300 Manuel

Ricoh

Ricoh Pro C900 Manuel utilisateur

Lexmark

Lexmark X925 Manuel utilisateur

Brother

Brother Business Smart MFC-J4510dw Manuel utilisateur

Epson

Epson Stylus CX8400 Series Manuel utilisateur