MUNBYN IMC01 Manuel utilisateur

Munbyn, More choice for your growing business IMC01 Banknote Counter

User Manual 1.09

Contents

1.0 Machine Overview 01

2.0 Packing Open and Installation

2.1 Packing List

2.2 Installation and Use Location

2.3 Installation Instructions

2.3.1 Installation Warnings

2.3.2 Power Supply Connection

2.3.3 Banknote Guider Installation

4.1 Start-up

4.2 Selection of Counting Mode

4.2.1 Single Currency Counting Mode

4.2.2 Automatic Recognition Mode

4.2.3 Multi-currency Counting Mode

4.2.4 Non-Volatile Memory for Currency Mode

4.3.Counting Function Options

4.3.1 Automatic Banknote Counting

4.3.2 SN Reading

4.3.3 Batch Setting

4.3.4 Accumulation

4.3.5Face Function

4.3.6Orient Function

4.4.Counting Speed Setting

4.5.Check Detail of Counting

4.5.1 Check the Serial Numbe

4.6.Print Information

4.6.1Printer prints banknote data

4.6.2Data transfer to PC

4.7.CFD Level

4.8.Face Function

4.9.ORI Function

5.1. Service Menu

5.1.1 Read Sensor Values

5.1.2 CIS Calibration

5.1.3 MG/MT Waveforms

3.0 Display and Operation Interface

3.1 Display Appearance

3.2 Operational Instructions for Function Keys

3.3 Display Interface

4.0 Operating Instructions

5.0. Menu Setting

6.0. Software Upgrade

7.0. Maintenance

8.0. Technical Parameters

5.1.4 Password Setting

5.1.5 Auto Diagnostic

5.1.6 PCS Counted and Reset

5.1.7 Acquire CIS image

5.1.8 Detection Level

5.1.9 IP Address

5.1.10 Back to Default setting

5.1.11. Back to Default setting

5.2 Version Information

5.3 Time Setting

5.4 Language Selection

IMC01 Banknote Counter User Manual Version 1.09 Page 01 IMC01 Banknote Counter User Manual Version 1.09 Page 02

1.0 Machine Overview

Banknote

Guider

TFT LCD

Display

Stacker

Impeller

Touch

Panel

Handle of

Back Cover

Speaker

Switch

On/Off Power

Cord Jack

RS232

Printer Port

USB

Port

External

Display Port

Hopper

Handle

Adjustable

Screw

Banknote

Processing

Wheel

Figure 1 -1 IMC01 Front Diagram

Figure 1- 2 IMC01 Back Diagram

Figure 1- 3 IMC01 Top Diagram

Figure 1- 4 IMC01 Side Diagram

Table 2- 1 Packing List

As shown in ﬁgure 2-1, please stay away from the surrounding walls and

reserve sufﬁcient operation space for placement of banknotes, opening or

closing of the cover plate, as well as for maintenance.

When you receive the package, open and check the packing list in the package.

Mixed denomination

Banknote counter

External LED display

screen with RJ12 cable

Power supply cable of

American standard

Power supply cable of

European standard

Power supply cable of United

Kingdom’s standard

Install at the hopper

Used for the CIS

calibration

Clean the machine

Clean the CIS or the other

sensors

The backup fuse for the

power protection

USB ﬂash drive with IMC01 manual

and troubleshooting video

Item Name

Banknote

Counter 1

External

Display

Power Cable

Banknote

Guiders

CIS Calibration

Paper

Nylon Brush

Soft cleaning

Cloth

USB ﬂash drive

Fuse

User Manual

Picture Quantity

(pcs) Description

Page 03 Page 04IMC01 Banknote Counter User Manual Version 1.09 IMC01 Banknote Counter User Manual Version 1.09

2.0 Packing Open and Installation

2.1 Packing List

2.2 Installation and Use Location

Figure 2-1 Installation and use location

Installation Space

Maintenance Space

(1) This machine is specially designed for indoor use. Please do not install or

use it outdoors.

(2) Please do not install it in place that cannot bear the weight of this product

or in places that are inclined or uneven.

(3) Do not use or please combustible materials, inﬂammables and volatile

items such as thinners around/inside this product.

Page 05 Page 06IMC01 Banknote Counter User Manual Version 1.09 IMC01 Banknote Counter User Manual Version 1.09

2.3 Installation Instructions 3.0 Display and Operation Interface

3.1 Display Appearance

3.2 Operational Instructions for Function Keys

2.3.1 Installation Warnings

2.3.2 Power Supply Connection

2.3.3 Banknote Guider Installation

Power Supply

External Display

Connector

Power Cord

Connector

Figure 2-2 Power and External Display Connection

Figure 2-3 Banknote Guider

Figure 3-1 Display Appearance

Operational Keys Display Area Operational Keys

Print key, to print the counted banknotes information.

Batch key, to select the batch number.

Menu key, to enter the menu interface by long pressing the key until a beep

sound.

Add key, to switch on/off the accumulation function.

Return key, to return to the previous interface.

Direction keys.

Auto on key, to switch on/off the automatic operation. Auto: automatically

counting as long as there is banknote on the hopper. Manual: manually

counting by press the restart key.

Speed key, to select the different available counting speeds.

4.1 Start-up

IMC01 Banknote Counter User Manual Version 1.09 Page 07 IMC01 Banknote Counter User Manual Version 1.09 Page 08

Power key, long press to enter the standby mode or resume to the

working mode

Detail key, to check the detail counted information.

Mode key, to select CNT mode, SDC mode or MDC mode for counting.

CFD level key, to select the Counterfeit Detection Sensitivity level.

Restart key, to start counting, or to start other operations.

Currency key, to select the one of currency, auto recognition or

multi-currency mode for counting.

3.3 Display Interface

Currently

selected

currency

SN option Counting mode

Accumulation status

CFD level

Counting

speed

Batch

Number

Number of

banknotes

Counted

amount

Auto

detecting

status

Figure 3-2 Main Display Interface

Figure 4-1 Self-checking Interface

Figure 4-2 Counting Ready State Interface

4.0 Operating Instructions

Turn on the switch after connecting the machine to power supply. First, the

machine enters the self-checking interface, as shown in Figure 4-1.

Please wait patiently for about 20 seconds, and the machine will spin the

banknote processing wheel several times to conduct a self-check, and then

enter the main interface as shown in Figure 4-2.

4.2 Selection of Counting Mode

Page 09 Page 10

4.2.1 Single Currency Counting Mode

4.2.1.1 MDC Mode

4.2.1.2 SDC Mode

4.2.1.3 CNT Mode

Figure 4-3 Initial Interface of MDC Mode Figure 4-4 Interface after MDC Counting

After the machine is turned on, the ﬂag & currency graphic appears in the

upper left corner, indicating that the machine is in the current currency count-

ing mode.

The default mode is MDC mode. By pressing the key of the control panel,

three counting modes can be cyclically switched, and the 3 counting modes

will be cyclically switched according to MDC-CNT-SDC sequence.

As shown in Figure 4-3, the IMC01 is in MDC mode. In this mode, the IMC01

will count the banknotes of all denominations of the selected currency, and

save the detail information of the counted banknotes at the same time,

including the total amount and the total number of the banknotes in stack-

er, so as to facilitate users to check. In this mode, the IMC01 has 2 counting

speed (800/1000 pcs/min) options.

As shown in Figure 4-5, the IMC01 is in SDC mode. In this mode, the IMC01

will count the banknotes of the same denomination of the selected curren-

cy with the ﬁrst banknote counted as a reference, and save the detail infor-

mation of the counted banknotes at the same time, including the total

amount and the total number of the banknotes in stacker, so as to facilitate

users to check. In this mode, the IMC01 has 2 counting speed

(800/1000/min) options.

As shown in Figure 4-7, the IMC01 is in CNT mode. This mode does not limit the

currency, and only count the number of banknotes. It only works with double

note detection function and no other counterfeit detection function. In this

mode, the IMC01 has 4 counting speed (800/1000/1200/1500 pcs/min) options.

Note:In the MDC and SDC mode, the IMC has the functions of image acqui-

sition, magnetic detection, ultraviolet detection and double note detection.

While in the CNT mode, there is only a double note detection function.

You can use this function to sort the mixed bill manually.

IMC01 Banknote Counter User Manual Version 1.09 IMC01 Banknote Counter User Manual Version 1.09

Figure 4-5 Initial Interface of SDC Mode Figure 4-6 Interface after SDC Counting

Figure 4-7 Initial Interface of CNT Mode Figure 4-8 Interface after CNT Counting

Page 11 Page 12

4.2.2 Automatic Recognition Mode

4.2.3 Multi-currency Counting Mode

In the process of counting banknotes, the IMC01 uses the ﬁrst banknote passing

through the sensor as the judgment rule to recognize the banknotes of all

denominations of the same currency. When banknotes of other currencies are

recognized, the machine will alarm and stop. At this time, banknotes from other

currencies need to be taken out, and the machine will continue counting. The

machine can only recognize all of the currencies displayed in the currency selec-

tion interface.

Take out the USD in the stacker, and then put the EUR into the machine to count.

The display screen is showed as Figure 4-12.

Press the key , the currency selection interface is shown as Figure 4-9. Move the

cursor to ‘AUTO’ by direction key (the default option is ‘AUTO’), and then press the

menu key , the display screen will be automatically adjusted to the main inter-

face, as shown in the Figure 4-10.

Example: Put a handful of USD into the IMC01 hopper to count. The interface of the

IMC01 displays as Figure 4-11 at the end of counting. The currency in the upper left

corner is identiﬁed as USD.

Multi-currency Mix Counting: Banknotes of multiple currencies are mixed together

and put into the IMC01 to count. The IMC01 can recognize all the ﬁrst 4 currencies

displayed on the currency selection interface.

As shown in Figure 4-9, press the key to select ‘MULT’ shown in Figure 4-13, and

then press the menu key , the display screen will be automatically adjusted to

the main interface, as shown in the Figure 4-14.

IMC01 Banknote Counter User Manual Version 1.09 IMC01 Banknote Counter User Manual Version 1.09

Figure 4-9 Currency Selection Interface

Figure 4-11 USD Counting Result

Figure 4-10 Auto Recognition Counting Interface

Figure 4-12 EUR Counting Result

Figure 4-13 Multi-Currency Selection Figure 4-14 Multi-currency Counting Mode

Note: Only MDC mode is effective in the Multi-currency mode.

4.3 Counting Function Options

Page 13 Page 14

4.2.4 Non-Volatile Memory for Currency Mode

4.3.1 Automatic Banknote Counting

4.3.2 SN Reading

4.3.3 Batch Setting

Example: Put a handful of banknotes (including USD, EUR, CAD, MXN) into the

IMC01 hopper to count. The interface of the IMC01 displays as Figure 4-15 at the end

of counting.

The currency mode setting is non-volatile. For example, if you set multi-currency

counting mode before power down the IMC01, next time the IMC01 is in

multi-currency counting mode after power on. It is very convenient that you don’t

need to reselect the currency every time you power on the IMC01.

The key is used to enable or disable the SN reading function in the main

interface. The default setting of SN reading is on. Every time the IMC01 resets,

the setting is reset to be on state.

Press the key to select the batch number in the banknote counting inter-

face, the screen display is shown in Figure 4-17. By pressing the key of the

control panel, the batch number will be cyclically switched according to

100-50-0 sequence.

Press the key to enable or disable the automatic banknote counting in the

main interface.

The default setting of automatic counting is on. Every time the IMC01 resets, the

setting will be reset to be on state.

As shown in Figure 4-16, pressing the key is needed every time when you put

banknotes in the hopper to start counting.

IMC01 Banknote Counter User Manual Version 1.09 IMC01 Banknote Counter User Manual Version 1.09

Figure 4-15 Multi-currency MDC Counting Result

Figure 4-16 Auto Banknote Detecting Off

Figure 4-17 Batch Setting Interface

Page 15 Page 16

4.3.4 Accumulation

4.3.5 Face Function

4.3.6 Orient Function

The batch number will be increased by 10 by pressing the key , or decreased

by 10 by pressing the key until it becomes 0. And it will be increased by 1 by

pressing the key , or decreased by pressing the key .

Press to enable the accumulation function.

In any counting mode, the accumulation function of the number of the banknotes

can be enabled by pressing the key .

This function is available by pressing the FACE key in SDC mode until “FACE” is

displayed on the main screen.

It allows the user to sort the banknotes based on whether they are loaded into the

hopper face up or face down. This ﬁrst note in the hopper determines the sorting

and counting orientation. If the ﬁrst note through the machine is face up, all notes

in the hopper that are face up will end up in the stacker, and the other notes will end

up in the reject pocket. Total number and value will be displayed on the main

screen.

This function is available by pressing the ORI key in SDC mode until “ORI” is

displayed on the main screen. This function allows the user to count and sort the

notes by one of 4 orientations. The ﬁst note in the hopper determines the counting

orientation. Any time a note passes through the machine and does not conform to

the orientation determined by the ﬁrst note, the machine will reject this note into

the reject pocket. Total amount and number of the notes will be displayed on the

home screen.

Press the key to return to the main interface if you conﬁrm the batch number.

Note: the stacker maximum capacity is 200 bills, so the batch number should be

less or equal to 200.

IMC01 Banknote Counter User Manual Version 1.09 IMC01 Banknote Counter User Manual Version 1.09

Figure 4-18 Batch Setting Interface

Figure 4-19 Batch Number Indicator

Autres manuels pour IMC01

Table des matières

Autres manuels MUNBYN Compteur de billets de banque

MUNBYN

MUNBYN IMC01 Manuel utilisateur

MUNBYN

MUNBYN IMC08 Manuel utilisateur

MUNBYN

MUNBYN IMC01 Manuel utilisateur

MUNBYN

MUNBYN IMC08 Manuel utilisateur

MUNBYN

MUNBYN IMC01 Manuel utilisateur

MUNBYN

MUNBYN IMC01 Mode d’emploi

MUNBYN

MUNBYN IMC08 Mode d’emploi

MUNBYN

MUNBYN IMC08 Manuel utilisateur

MUNBYN

MUNBYN IMC51 Manuel utilisateur

Manuels Compteur de billets de banque populaires d'autres marques

BellCon

BellCon BellCount S515 Manuel utilisateur

Orbit Research

Orbit Research iBill Manuel utilisateur

Grace Technology

Grace Technology GV-870 Manuel utilisateur

Safescan

Safescan 2265 Manuel utilisateur

Ribao

Ribao BC-30 Manuel utilisateur

Mixed Bills

Mixed Bills DG 1000 Manuel utilisateur

Safescan

Safescan 2660-S Manuel utilisateur

PRO Intellect Technology

PRO Intellect Technology PRO 95U Manuel utilisateur

Dors

Dors 600 Manuel utilisateur

radiotec

radiotec rapidcount S 575 Manuel utilisateur

CUMMINS ALLISON

CUMMINS ALLISON JetScan Manuel utilisateur

PRO Intellect Technology

PRO Intellect Technology 40 NEO Manuel utilisateur

Conrad

Conrad 75 17 78 Manuel utilisateur

Total

Total M2300U Manuel de formation

Double Power Electronics

Double Power Electronics DP-8120VB Manuel utilisateur

ratiotec

ratiotec Soldi Smart Plus Manuel d'utilisation et d'entretien

Olympia

Olympia NC 455 Manuel utilisateur

Plaisio

Plaisio Q-CONNECT QCD11 Manuel utilisateur