MULTIQUIP StreetPro SP1E16A Manuel utilisateur

OPERATION MANUAL

THIS MANUAL MUST ACCOMPANY THE EQUIPMENT AT ALL TIMES.

To ﬁnd the latest revision of this

publication, visit our website at:

www.multiquip.com

StreetPro SERIES

MODEL SP1E16A

PROFESSIONAL PAVEMENT SAW

(5HP ELECTRIC MOTOR)

Revision #0 (04/14/10)

PN: 38257

PAGE 2 — SP1E16A PAVEMENT SAW • OPERATION MANUAL — REV. #0 (04/14/10)

PROPOSITION 65 WARNING

Engine exhaust and some of

its constituents, and some dust created

of California to cause cancer, birth

defects and other reproductive harm.

by power sanding, sawing, grinding,

drillingandotherconstructionactivities

contains chemicals known to the State

Some examples of these chemicals are:

Leadfromlead-basedpaints.

Crystallinesilicafrombricks.

Cementandothermasonryproducts.

Arsenicandchromiumfromchemically

treatedlumber.

Your risk from these exposures varies,

dependingonhowoftenyoudothis type

of work. To reduce your exposure to

these chemicals: work in aALWAYS

well ventilated area, and work with

approved safety equipment, such as

dust masks that are specially designed

to filter out microscopic particles.

SP1E16A PAVEMENT SAW • OPERATION MANUAL — REV. #0 (04/14/10) — PAGE 3

Grinding/cutting/drilling of masonry, concrete, metal and

other materials with silica in their composition may give

off dust or mists containing crystalline silica. Silica is a

basic component of sand, quartz, brick clay, granite and

numerous other minerals and rocks. Repeated and/or

substantial inhalation of airborne crystalline silica can

cause serious or fatal respiratory diseases, including

silicosis. In addition, California and some other

authorities have listed respirable crystalline silica as a

substance known to cause cancer. When cutting such

materials, always follow the respiratory precautions

mentioned above.

WARNING

Grinding/cutting/drilling of masonry, concrete, metal and

other materials can generate dust, mists and fumes

containing chemicals known to cause serious or fatal

injury or illness, such as respiratory disease, cancer,

birth defects or other reproductive harm. If you are

unfamiliar with the risks associated with the particular

process and/or material being cut or the composition of

the tool being used, review the material safety data

sheet and/or consult your employer, the material

manufacturer/supplier, governmental agencies such as

OSHA and NIOSH and other sources on hazardous

materials. California and some other authorities, for

instance, have published lists of substances known to

cause cancer, reproductive toxicity, or other harmful

effects.

Control dust, mist and fumes at the source where

possible. In this regard use good work practices and

follow the recommendations of the manufacturers or

suppliers, OSHA/NIOSH, and occupational and trade

associations. Water should be used for dust

suppression when wet cutting is feasible. When the

hazards from inhalation of dust, mists and fumes cannot

be eliminated, the operator and any bystanders should

always wear a respirator approved by NIOSH/MSHA for

the materials being used.

WARNING

SILICOSIS WARNING RESPIRATORY HAZARDS

SILICOSIS/RESPIRATORY WARNINGS

PAGE 4 — SP1E16A PAVEMENT SAW • OPERATION MANUAL — REV. #0 (04/14/10)

TABLE OF CONTENTS

SP1E16A Pavement Saw

Proposition 65 Warning ........................................... 2

Silicosis/Respiratory Warnings ................................ 3

Table Of Contents .................................................... 4

Training Checklist ..................................................... 6

Daily Pre-Operation Checklist ................................. 7

Safety Information .............................................. 8-12

Speciﬁcations/Dimensions ..................................... 13

General Information ............................................... 14

Controls And Components .................................... 15

Inspection/Setup ............................................... 16-17

Blades ............................................................... 18-20

Initial Startup ......................................................... 20

Operation ............................................................... 21

Maintenance ..................................................... 21-22

Troubleshooting (Electric Motor) ............................ 22

Troubleshooting (Saw) ........................................... 23

NOTICE

Speciﬁcations are subject to change without notice.

SP1E16A PAVEMENT SAW • OPERATION MANUAL — REV. #0 (04/14/10) — PAGE 5

NOTES

PAGE 6 — SP1E16A PAVEMENT SAW • OPERATION MANUAL — REV. #0 (04/14/10)

TRAINING CHECKLIST

Training Checklist

No, Description OK? Date

1Read operation manual

completely.

2Machine layout, location of

components.

3Operation of controls (machine

not running).

4 Safety controls.

5 Emergency stop procedures.

6 Startup of machine.

7 Starting a cut.

8 Pavement cutting techniques.

9 Stopping a cut.

10 Restart after stopping blade within

work surface — explanation

11 Shutdown of machine.

12 Lifting of machine.

13 Machine transport and storage.

SP1E16A PAVEMENT SAW • OPERATION MANUAL — REV. #0 (04/14/10) — PAGE 7

DAILY PRE-OPERATION CHECKLIST

Daily Pre-Operation Checklist      

1 Hardware and damage check

2 Condition of blade

3 ON/OFF switch

4 Condition of power cable

PAGE 8 — SP1E16A PAVEMENT SAW • OPERATION MANUAL — REV. #0 (04/14/10)

SAFETY INFORMATION

Do not operate or service the equipment before reading

the entire manual. Safety precautions should be followed

at all times when operating this equipment.

Failure to read and understand the safety

messages and operating instructions could

result in injury to yourself and others.

SAFETY MESSAGES

The four safety messages shown below will inform you

about potential hazards that could injure you or others. The

safety messages speciﬁ cally address the level of exposure

to the operator and are preceded by one of four words:

DANGER, WARNING, CAUTION or NOTICE.

SAFETY SYMBOLS

DANGER

Indicates a hazardous situation which, if not avoided,

WILL result in DEATH or SERIOUS INJURY.

WARNING

Indicates a hazardous situation which, if not avoided,

COULD result in DEATH or SERIOUS INJURY.

CAUTION

Indicates a hazardous situation which, if not avoided,

COULD result in MINOR or MODERATE INJURY.

NOTICE

Addresses practices not related to personal injury.

Potential hazards associated with the operation of this

equipment will be referenced with hazard symbols which

may appear throughout this manual in conjunction with

safety messages.

Rotating parts hazards

Symbol Safety Hazard

Cutting and crushing hazards

Electric shock hazards

SP1E16A PAVEMENT SAW • OPERATION MANUAL — REV. #0 (04/14/10) — PAGE 9

SAFETY INFORMATION

GENERAL SAFETY

CAUTION

NEVER operate this equipment without proper protective

clothing, shatterproof glasses, respiratory protection,

hearing protection, steel-toed boots and other protective

devices required by the job or city and state regulations.

Avoid wearing jewelry or loose ﬁ tting clothes that may

snag on the controls or moving parts as this can cause

serious injury.

NEVER operate this equipment when not

feeling well due to fatigue, illness or when

under medication.

NEVER operate this equipment under the

inﬂ uence of drugs or alcohol.

ALWAYS clear the work area of any debris, tools, etc.

that would constitute a hazard while the equipment is

in operation.

No one other than the operator is to be in the working

area when the equipment is in operation.

DO NOT use the equipment for any purpose other than

its intended purposes or applications.

NOTICE



This equipment should only be operated by trained and

qualiﬁ ed personnel 18 years of age and older.



Whenever necessary, replace nameplate, operation and

safety decals when they become difﬁ cult read.

Manufacturer does not assume responsibility for any

accident due to equipment modiﬁ cations. Unauthorized

equipment modiﬁ cation will void all warranties.

NEVER use accessories or attachments that are not

recommended by Multiquip for this equipment. Damage

to the equipment and/or injury to user may result.

ALWAYS know the location of the nearest

ﬁ re extinguisher.

ALWAYS know the location of the nearest

ﬁ rst aid kit.

ALWAYS know the location of the nearest phone or

keep

a phone on the job site.

Also, know the phone numbers

of the nearest ambulance, doctor and

ﬁ re department.

This information will be invaluable in the case of an

emergency.

PAGE 10 — SP1E16A PAVEMENT SAW • OPERATION MANUAL — REV. #0 (04/14/10)

SAFETY INFORMATION

SAW SAFETY

DANGER.

NEVER operate the equipment in an explosive

atmosphere or near combustible materials. An

explosion or ﬁ re could result causing severe

bodily harm or even death.

WARNING

Accidental starting can cause severe injury

or death. ALWAYS place the ON/OFF

switch in the OFF position.

NEVER disconnect any emergency or safety devices.

These devices are intended for operator safety.

Disconnection of these devices can cause severe injury,

bodily harm or even death. Disconnection of any of these

devices will void all warranties.

CAUTION

Anytime the saw is lifted onto its nose or tilted fully

back, such as for maintenance access, the high end of

the saw MUST be blocked up to prevent the possibility

of crush injury.

NOTICE

ALWAYS ensure saw is securely

placed on appropriate

blocks or jackstands when performing maintenance

requires elevation of the saw.

If saw has brakes, ensure brakes are applied when

leaving or when using on a slope. Some saws utilize a

brake system where the brakes are automatically applied

when the motor is stopped.



If saw has a parking brake, ensure that the parking brake

is engaged and holds the saw safely in place when

parking on a slope. Turning the saw across the angle of

the slope will help prevent accidental downhill movement.

ALWAYS block the saw with appropriate blocks when

leaving the saw parked on a slope.

To prevent unexpected loss of control, DO NOT

start saw

on a sloping surface

DO NOT

use on excessive slopes or on extremely uneven

surfaces

ALWAYS

keep the machine in proper running condition.

Fix damage to machine and replace any broken parts

immediately.



Make sure there is no buildup of concrete, grease, oil or

debris on the machine.

ALWAYS

store equipment properly when it is not being

used. Equipment should be stored in a clean, dry location

out of the reach of children and unauthorized personnel.

Table des matières

Autres manuels MULTIQUIP Scie

MULTIQUIP

MULTIQUIP SideWinder HS81A Mode d’emploi

MULTIQUIP

MULTIQUIP MP25E1 Manuel utilisateur

MULTIQUIP

MULTIQUIP MASON PRO MP1 Guide d'application

MULTIQUIP

MULTIQUIP Stow Cutter 3 CC813H20 Mode d’emploi

MULTIQUIP

MULTIQUIP SP-6457 TD Manuel utilisateur

MULTIQUIP

MULTIQUIP CD6CE13H18 Manuel utilisateur

MULTIQUIP

MULTIQUIP SP118 Manuel utilisateur

MULTIQUIP

MULTIQUIP PS706016 Manuel utilisateur

MULTIQUIP

MULTIQUIP SP2S20H Manuel utilisateur

MULTIQUIP

MULTIQUIP MP1415E Mode d’emploi

MULTIQUIP

MULTIQUIP SideWinder HS62A Mode d’emploi

MULTIQUIP

MULTIQUIP MP1455H Mode d’emploi

MULTIQUIP

MULTIQUIP SP403030 Manuel utilisateur

MULTIQUIP

MULTIQUIP MP3 Mode d’emploi

MULTIQUIP

MULTIQUIP tp7X Manuel utilisateur

MULTIQUIP

MULTIQUIP FS2 Manuel utilisateur

MULTIQUIP

MULTIQUIP Diamond Back SP303516 Street Pro Mode d’emploi

MULTIQUIP

MULTIQUIP MP25E1 Manuel utilisateur

MULTIQUIP

MULTIQUIP STREET PRO 2 Mode d’emploi

MULTIQUIP

MULTIQUIP FCG1 SERIES Guide d'application

MULTIQUIP

MULTIQUIP CS706016 Manuel utilisateur

MULTIQUIP

MULTIQUIP FS 1 Manuel utilisateur

MULTIQUIP

MULTIQUIP StreetPro SP706016 Manuel utilisateur

MULTIQUIP

MULTIQUIP MP2050E1 Manuel utilisateur

Manuels Scie populaires d'autres marques

RIDGID

RIDGID BS1400 Manuel utilisateur

ATIKA

ATIKA BWS 400-2 Manuel utilisateur

RGC

RGC FS20 Manuel utilisateur

Makita

Makita M2300 Manuel utilisateur

IMET Spa

IMET Spa BASIC 300 PLUS SHI Manuel utilisateur

IMET Spa

IMET Spa SIRIO 370 AF-E Manuel utilisateur

Optimum

Optimum OPTisaw CS 275 Manuel utilisateur

Makita

Makita BPB180 Manuel utilisateur

Stihl

Stihl MS 462 C-M Manuel utilisateur

AEG

AEG TS 250 K Manuel utilisateur

Meec tools

Meec tools 004665 Manuel utilisateur

Makita

Makita LS1018L Manuel utilisateur

Ryobi

Ryobi RCS1400 Manuel utilisateur

DeWalt

DeWalt DCS391 Manuel utilisateur

Sealey

Sealey SA72 Manuel utilisateur

skilsaw

skilsaw SPT88 Instructions de montage

Urrea

Urrea SI810 Dimensions et guide d'installation

EINHELL

EINHELL BKG 210/1 Manuel utilisateur