Mueller ULTRA-STITCH SM-1100 Manuel utilisateur
INSTRUCTION MANUAL
ULTRA-STITCH
Sewing Machine
Model: SM-1100white
Your satisfaction is guaranteed. If you are not completely satisfied with our
Ultra-Stitch Sewing Machine and the results it brings, we insist that you let us know.
We’ll help make the Sewing Machine work for you, or we’ll refund your money.
1
TABLE OF CONTENTS
IMPORTANT SAFETY INSTRUCTIONS.......................................... 2
INTENDED USE.................................................................................3
BEFORE FIRST USE......................................................................... 3
SEWING MACHINE BASICS.............................................................4
Parts.............................................................................................. 4
Connecting the Foot pedal...........................................................6
Connecting the Power Supply...................................................... 6
THREADING THE MACHINE.............................................................7
Winding the bobbin...................................................................... 7
Inserting the bobbin......................................................................8
Threading the upper thread..........................................................8
Using the needle threader...........................................................10
Drawing up the Bobbin thread....................................................10
Adjusting the thread tension......................................................11
SEWING...........................................................................................13
Selecting the stitch pattern........................................................13
Basic sewing...............................................................................14
Removing the fabric and cutting the threads............................15
Reverse sewing...........................................................................15
Using the seam ripper.................................................................16
Buttonhole sewing......................................................................16
4-Step Buttonhole sewing process............................................17
Button sewing............................................................................. 17
Zipper sewing............................................................................. 18
Replacing the needle.................................................................. 19
Removing or attaching the Presser foot................................... 20
Removing or attaching the Presser foot holder........................21
CLEANING AND MAINTENANCE...................................................22
Cleaning the main unit................................................................22
Cleaning the area inside the bobbin cover................................ 22
Storage........................................................................................ 22
Maintenance............................................................................... 22
TROUBLESHOOTING......................................................................23
SPECIFICATIONS........................................................................... 25
2
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic safety should always be followed, includ-
ing the following:
Read all instructions before using this sewing machine.
DANGER - To reduce the risk of electric shock:
• Before connecting the power adapter to a power socket, make sure that the
voltage on its rating label corresponds to the voltage in the power socket to which
you wish to connect it.
• The machine should never be left unattended when plugged in.
• Always unplug this machine from the electric outlet immediately after using,
before cleaning, or before performing any maintenance.
• Do not use an extension cord with this product.
• Do not reach for the machine if it has fallen into water. Unplug immediately.
• Do not place or store the machine where it can fall or be pulled into a tub or sink.
• Do not place in or drop into water or other liquid.
WARNING - To reduce the risk of fire, electric shock, or injury to persons:
• Do not allow children to play with the machine. The machine is not intended to be
used by children.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and knowl-
edge unless they have been given supervision or instruction concerning use of the
appliance by a person responsible for their safety.
• Use this appliance only for its intended use as described in this instruction
manual.
• Only use attachments provided and recommended by the manufacturer.
• Never operate this sewing machine if it has a damaged cord or plug, if it is not
working properly, if it has been dropped or damaged, or dropped in water. Do not
attempt to repair the appliance yourself. Only a qualified appliance technician
should repair the appliance before re-use.
• Never drop or insert any object into any opening other than the required parts.
• To disconnect, turn OFF the power switch (the symbol "O" on the switch indicates
the "OFF" position), then remove the plug from the outlet.
• Do not unplug by pulling on the cord. To unplug, grasp the plug, not the cord.
• Keep your fingers away from all moving parts. Special care is required around the
sewing machine needle.
• Never look away from the needle while sewing.
• Always use the proper needle plate. The wrong plate can cause the needle to
break.
• Do not use bent, blunt, or damaged needles.
• Do not pull or push fabric while stitching. It may deflect the needle causing it to
break.
3
• This product is intended for sewing fabric and other similar soft materials, such
as thin leather, cotton or synthetic thread.
• This product is intended for household use only. It is not intended for commercial
use.
• This product is intended to be used in dry indoor areas only.
•The product comes pre-threaded. Remove the test cloth on the sewing table by
pulling the Presser foot lifter (33) up to raise the Presser foot (4) and cut the
threads.
Some of the accessories are shipped inside of the Removable accessory
storage/extension table (13). Hold the base of the accessories storage to pull it
out from the main unit. Then, pull down the cover of the storage compartment
using the two slots on the sides to remove the accessories.
BEFORE FIRST USE
•Switch the sewing machine to OFF position (“O”) when making any adjustments in
the needle area, such as threading the needle, changing the needle, threading the
bobbin or changing the presser foot, etc.
• Do not use the machine if it is wet.
• Do not operate the appliance with wet hands or while standing on a wet floor. Do
not touch the power adapter with wet hands.
• The Foot pedal is used to operate this machine. Do not place objects on the Foot
pedal.
• Always place the appliance on a level, dry and stable surface.
• Do not place the appliance on or near hot surfaces.
• Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.
• Do not use outdoors.
INTENDED USE
4
SEWING MACHINE BASICS
PARTS
1.Presser foot locking lever
2.Presser set screw
3.Presser foot holder
4.Presser foot
5.Needle plate
6.Bobbin cover
7.Bobbin cover lock
8.Thread hole
12.Feed dog
9.Needle clamp screw
10.Needle clamp
11.Needle – size 14 (90)
13.Removable
accessory
storage /
extension
table
14.Thread cutter
15.LED light switch
16.Thread
tension dial
17.Thread clamp
18.Thread guide
19.Tension disk 1
20.Tension disk 2
21.Take-up lever 22.Pattern
selector dial
-primary-
23.Pattern
selector dial
-secondary-
24.Hand wheel
25.Stitch
indication
panel
5
26.Power socket
27.Foot pedal socket
28.Power switch
29.Reverse
sewing lever
30.Bobbin stopper
31.Bobbin winding spindle 32.Spool holders
33.Presser
foot lifter
Parts located in the removable accessories
storage/extension table
36. Buttonhole presser foot 37. Needle threader 38. Zipper presser foot
39. Lint brush 40. Seam ripper
42. Power
adapter
41. Foot
pedal
34. Bobbin (x4) 35. Button sewing plate Pack of 6 needles – size 14 (90)
6
Connecting the Foot pedal
1. Connect the Foot pedal (41) cord to the Foot
pedal socket (27) on the sewing machine.
2. Place the Foot pedal on
the floor unobstructed.
Connecting the Power Supply
• Turn OFF the power switch (28) - The symbol "O"
on the switch indicates the "OFF" position.
• Connect the Power adaptor (42) cord to the
Power socket (26) on the sewing machine, and
then plug the Power adaptor plug into the wall
outlet.
•Turn ON the power switch to turn on the
machine- The symbol "I" on the switch indicates
the "ON" position.
• After use, always turn OFF the power switch and
unplug the machine from the wall outlet.
WARNING: While in operation, always keep your eyes on the sewing area,
and do not touch any moving parts such as the Take-up lever (21), Hand
wheel (24), or Needle (11).
Always turn OFF the power switch and unplug from the power supply:
- when leaving the machine unattended
- when attaching or removing parts
- when cleaning the machine.
Do not place anything on the Foot pedal (41) for risk that the sewing
machine will run intermittently.
7
THREADING THE MACHINE
Winding the bobbin
1. Place a spool of thread (not
included) on one of the Spool hold-
ers (32).
2. Draw the thread from the spool
through the Thread guide (18).
3. Pass the thread through the hole
in the Bobbin (34) from the inside to
the outside. With the thread coming
out from the top, snap the Bobbin
on the Bobbin winding spindle (31).
4. Push the Bobbin winding spindle
(31) to the right towards the Bobbin
stopper (30).
5. While holding the free end of the
thread, step on the Foot pedal (41)
to start winding. After winding a few
layers, release the Foot pedal and
cut off the free end of the thread.
6. Step on the Foot pedal again to
continue filling the Bobbin (34). The
winding motion slows down when
the Bobbin is full. Cut the thread and
push the Bobbin winding spindle
(31) to the left to remove the
Bobbin.
NOTE: Do not move the Bobbin
winding spindle (31) while the
machine is running. The sewing
motion of the sewing product is
disengaged in the winding process.
1
2
3
4
5
6
8
Inserting the bobbin
1. Turn the Hand wheel (23) coun-
terclockwise (toward you) to raise
the Needle (11) to the highest
point.
2. Slide and hold the Bobbin cover
lock (7) to the right to lift and
remove the Bobbin cover (6).
3. Insert a Bobbin (34) in the
bobbin case so that the thread is
running in a clockwise direction.
4. Pull the thread, so there is at
least 4 inches (10 cm) of loose
thread.
NOTE: Do not place the Bobbin
cover back until the full threading
process is complete.
Threading the
upper thread
1. Turn the Hand wheel (24) coun-
terclockwise (toward you) to raise
the needle (11) to the highest
point, and then raise the Presser
foot lifter (33).
NOTE: For safety reasons, it is
strongly suggested that you turn
off the power before threading.
4”
(10 cm)
b
a
9
2. Place the desired thread spool
(not included) onto one of the
Spool holders (32). Draw the
thread from the spool through the
Thread guide (18).
3. Push and hold the Thread
clamp (17) to the left, pass the
thread by the right side of the
Thread clamp and then release
the clamp.
4. Pass the thread down Tension
disk 1 (19) to the bottom and then
pull it up into Tension disk 2 (20).
5. Loop it up to the top of the
Tension disk 2 (20) before pulling
back down and threading through
the slotted eye of the Take-up
lever (21) from left to right.
6. Pull the thread back down and
pass it through the Thread hole
(8) and then behind the Needle
clamp (10) and then down to the
needle, which should be threaded
from front to back.
7. Pull the thread towards the
back, so there is at least 4 inches
(10 cm) of loose thread.
Table des matières
