MTD Remington Guide d'installation

Professional Shop Manual

Remington 22” Trimmer Mower

MTD Products Inc. - Product Training and Education Department

NOTE: These materials are for use by trained technicians who are experienced in the service and repair of outdoor power

equipment of the kind described in this publication, and are not intended for use by untrained or inexperienced individuals.

These materials are intended to provide supplemental information to assist the trained technician. Untrained or inexperi-

enced individuals should seek the assistance of an experienced and trained professional. Read, understand, and follow all

instructions and use common sense when working on power equipment. This includes the contents of the product’s Oper-

ators Manual, supplied with the equipment. No liability can be accepted for any inaccuracies or omission in this publication,

although care has been taken to make it as complete and accurate as possible at the time of publication. However, due to

the variety of outdoor powerequipment and continuingproduct changes that occur over time, updates will be made to these

instructions from time to time. Therefore, it may be necessary to obtain the latest materials before servicing or repairing a

product. The company reserves the right to make changes at any time to this publication without prior notice and without

incurring an obligation to make such changes to previously published versions. Instructions, photographs and illustrations

used in this publication are for reference use only and may not depict actual model and component parts.

About the text format............................................................................................. 1

Fasteners ..............................................................................................................3

Assembly instructions ...........................................................................................3

The 22” Trimmer Mower .......................................................................................3

Understanding model and serial numbers.............................................................4

Trimmer Line .........................................................................................................5

Skid Assembly ......................................................................................................6

Spindle ..................................................................................................................7

Belt Replacement ................................................................................................10

Wheels and Axle .................................................................................................12

Debris Screen .....................................................................................................13

Table of Contents

22” Trimmer Mower

Professional Service Manual Intent: This manual is intended to provide service dealers with repair and overhaul

procedures for the Remington trimmer mower.

Disclaimer: The information contained in this manual is correct at the time of writing. Both the product and the infor-

mation about the product are subject to change without notice.

About the text format

Certain flags and key words are used to indicate the nature of the text that accompanies them. They are as follows:

CAUTION: Indicates a potentially hazardous situation that, if not avoided, may result

in minor or moderate injury. It may also be used to alert against unsafe practices.

WARNING: Indicates a potentially hazardous situation that, if not avoided, could

result in death of serious injury.

DANGER: Indicates an imminently hazardous situation that, if not avoided, will result

in death or serious injury. This signal word is to be limited to the most extreme situa-

tions.

NOTE: “NOTE” is used to point-out helpful information that may not fit as a step in a procedure.

1. Numbered steps indicate specific things that should be done, and the order in which they should be done.

1a. Sub steps will be lettered and nested within steps. Two or more sub steps may be combined to describe

the actions required to complete a step.

•Bullet points: Indicate sub-steps or points of interest, without implying order or relative importance.

Disclaimer: This manual is intended for use by trained, professional technicians.

• Common sense in operation and safety is assumed.

• In no event shall MTD be liable for poor text interpretation, or poor execution of the procedures described

in the text.

If the person using this manual is uncomfortable with any procedures they encounter, they should seek the help

of a qualified technician.

22” TRIMMER MOWER

! WARNING! WARNING

! DANGER! DANGER

! CAUTION! CAUTION

• Be prepared in case of emergency:

Keep a fire extinguisher nearby

Keep a first aid kit nearby

Keep emergency contact numbers handy

• Replace any missing or damaged safety labels on shop equipment.

• Replace any missing or damaged safety labels on equipment being serviced.

• Remember that some hazards have a cumulative effect. A single exposure may

cause little or no harm, but continual or repeated exposure may cause very serious

harm.

• Clean spills and fix obviously dangerous conditions as soon as they are noticed.

• Lift and support heavy objects safely and securely.

• Be aware of your surroundings and potential hazards that are inherent to all power

equipment. All the labels in the world cannot protect a technician from an instant of

carelessness.

! CAUTION! CAUTION

• Grooming and attire:

Do not wear loose fitting clothing that may become entangled in equipment.

Long hair should be secured to prevent entanglement in equipment.

Jewelry is best removed.

• Protective gear: includes, but is not limited to

Clear eye protection ................................ while working around any machinery

Protective gloves..................................... where necessary

Armored footwear.................................... when working around any machinery

Hearing protection................................... in noisy environments

Chemically resistant gloves..................... when working with chemicals or solvents

Respirator................................................ when working with chemical or solvents

Appropriate tinted eye protection............. when cutting or welding

Flame resistant headgear, jacket, chaps. when cutting or welding

! WARNING! WARNING

• Exhaust fumes from running engines contain carbon monoxide (CO). Carbon

monoxide is a colorless odorless gas that is fatal if inhaled in sufficient quantity.

Only run engines in well ventilated areas. If running engines indoors, use an

exhaust evacuation system with adequate make-up air ventilated into the shop.

! DANGER! DANGER

22” Trimmer Mower

Fasteners

• The fasteners used on the equipment described in this manual, and the engine that powers it are a combi-

nation of metric and fractional inch. For this reason, wrench sizes are frequently identified in the text, and

measurements are given in U.S. and metric scales.

• If a fastener has a locking feature that has worn, replace the fastener or apply a small amount of releas-

able thread locking compound such as Loctite® 242 (blue).

• Some fasteners, like cotter pins, are single-use items that are not to be reused. Other fasteners, such as:

lock washers, retaining rings, and internal cotter pins (hairpin clips), may be reused if they do not show

signs of wear or damage. This manual leaves that decision to the judgment of the technician.

Assembly instructions

•Torque specifications may be noted in the part of the text that covers assembly. They may be summa-

rized in tables along with special instructions regarding locking or lubrication. Whichever method is more

appropriate will be used. In many cases, both will be used so that the manual is handy as a quick-refer-

ence guide as well as a step-by-step procedure guide that does not require the user to hunt for informa-

tion.

•Lubricant quantity and specification may be noted in the part of the text that covers maintenance, and

again in the section that covers assembly. They may also be summarized in tables along with special

instructions. Whichever method is more appropriate will be used. In many cases, the information will be

found in several places in the manual so that the manual is handy as a quick-reference guide as well as a

step-by-step procedure guide that does not require the user to hunt for information.

• The level of assembly instructions provided will be determined by the complexity of reassembly, and by

the potential for damage or unsafe conditions to arise from mistakes made in assembly.

• Some instructions may refer to other parts of the manual for subsidiary procedures. This avoids repeating

the same procedure two or three times in the manual.

The 22” Trimmer Mower

The 22” wheeled string trimmer was intended for clear-

ing heavy growth from unimproved land. This model has a

engine brake feature. When the engagement control lever

is released, the engine will stop running. See Figure 1.

NOTE: For engine related information refer to publication

769-03354B

Figure 1

Understanding model and serial numbers

The model number of the 22” trimmer mower described in

this manual is 25A-262J710.

The break down of what the model number means is as

follows:

• 25 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .indicates that this is a edger or trimmer

• . . .A. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .sales revision level

• . . . . “-”. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .not used

• . . . . . . . 26 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .indicates this is a trimmer mower

• . . . . . . . . . .J7 . . . . . . . . . . . . . . . . . . . . . . . . . . . .engine

• . . . . . . . . . . . . 783 . . . . . . . . . . . . . . . . . . . . . . . .customer number

The serial number is 1I243P10039. The serial number reads as follows:

• 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .engineering level

• . I. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .month of production (I = September)

• . . .30 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .day of the month

• . . . . . 3 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .last digit of the year

• . . . . . . . P . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .plant it was built in

• . . . . . . . . . . 1. . . . . . . . . . . . . . . . . . . . . . . . . . . . .assembly line number

• . . . . . . . . . . . . 0011 . . . . . . . . . . . . . . . . . . . . . . .number of unit built

Additional technical and service information may also be available to our company authorized service center per-

sonnel through our company corporate offices, regional parts distributors and regional service center field support

personnel. Please contact the designated support office in your area or our corporate offices directly should further

service information be needed.

MTD Products LLC

P.O. Box 368022

Cleveland, OH 44136

Telephone: (800) 800-7310

www.mtdproducts.com

Figure 2

22” Trimmer Mower

Trimmer Line

The trimmer line is a fixed length and can easily be

replaced following the diagram on the front of the trimmer

base assembly. See Figure 3.

1. Disconnect and ground the spark plug wire.

2. Remove the worn string from the spindle.

3. Fold the replacement trimmer line in half and insert

both ends through the loop near the edge of the spin-

dle.

4. Pull the ends of the trimmer line through the loop until

the line is securely beneath the metal tab.

See Figure 4.

5. Cross the line ends and pull each tightly to secure the

trimmer line in place.

NOTE: The line will be trimmed to final length by the blade

mounted under the deflector.

NOTE: Always use 490-040-C035 trimmer line.

Figure 3

Figure 4

Skid Assembly

NOTE: The skid assembly comes in contact with

the ground during normal operation and will

require replacement as normal mainte-

nance. The skid assembly is available as

service part number: 982-0143.

See Figure 5.

To remove/replace the skid assembly:

1. Turn of the engine.

2. Disconnect the spark plug wire and ground it to the

engine block.

3. Remove and discard the three nuts and bolts that

secure the skid to the spindle assembly using a pair

of 7/16” wrenches.

4. Lower the skid off of the spindle.

5. Install the skid by following the previous steps in reverse order.

NOTE: Do not re-use the original hardware, new hardware will be included with the skid assembly.

Figure 5

skid assembly

Table des matières

Autres manuels MTD Tondeuse à gazon

Manuels Tondeuse à gazon populaires d'autres marques

RHINO

RHINO 1958 Manuel utilisateur

Wolf Garten

Wolf Garten Compact plus 40 B Manuel utilisateur

Cub Cadet

Cub Cadet LTX 1045 Manuel utilisateur

Craftsman

Craftsman 917.378461 Manuel utilisateur

GGP ITALY SPA

GGP ITALY SPA CR/CS 434 SERIES Manuel utilisateur

Challenge

Challenge CH18V2 Instructions de fonctionnement

TALEN TOOLS

TALEN TOOLS AVR HGM30 Manuel utilisateur

DEWEZE

DEWEZE ATM-725 Manuel d'utilisation

Weed Eater

Weed Eater 180083 Manuel utilisateur

Husqvarna

Husqvarna Poulan Pro PP185A42 Manuel utilisateur

Better Outdoor Products

Better Outdoor Products Quick Series Manuel utilisateur

Cub Cadet

Cub Cadet 23HP Z-Force 60 Manuel d'utilisation

Toro

Toro Groundsmaster 3505-D Manuel utilisateur

Dennis

Dennis FT 610 Manuel utilisateur

AIRFORCE

AIRFORCE F-15 Gen 3 Manuel utilisateur

Toro

Toro 74806 Manuel utilisateur

Stihl

Stihl RMA 443 PV Manuel utilisateur

Yard-Man

Yard-Man 3700-0 Manuel utilisateur

MTD remington Guide d'installation

Manuels Tondeuse à gazon populaires d'autres marques