MSI S1102-01 Manuel utilisateur

S1102-01

MS-S336

Server System

User Guide

2Contents

Revision

V1.1, 2023/07

Contents

Regulatory Notices....................................................................................................... 4

Safety Information ......................................................................................................... 6

System Specifications .................................................................................................. 7

System Overview .......................................................................................................... 8

System LED Indicators............................................................................................... 11

Motherboard Overview............................................................................................... 12

Motherboard Connectors .......................................................................................... 13

Storage Connectors.............................................................................................. 13

SATA1~8: SATA 3.0 6Gb/s Ports ................................................................... 13

M2_1, M2_2: M.2 Slots (M Key, PCIe 4.0, 22110/ 2280)................................. 14

Expansion Slots .................................................................................................... 15

PCIE_1~2: PCIe Expansion Slots .................................................................. 15

Power Connectors ................................................................................................ 16

SATAPWR1: SATA Power Connector............................................................ 16

JPWR1: 12V Power Connector ...................................................................... 16

JPWR2: Main Power Connector .................................................................... 17

JSDOMPWR1: SATA DOM Power Connector................................................. 17

Cooling Connectors .............................................................................................. 18

FAN1 ~ 8, PUMP1: Fan Power Connectors ................................................... 18

Other Connectors ................................................................................................. 19

JFP1: Front Panel Connector........................................................................ 19

JTPM1: SPI TPM Module Box Header ........................................................... 20

JGPIO1: GPIO Header .................................................................................... 21

JPMBUS1: PMBUS Box Header .................................................................... 21

JCHASSIS: Chassis Intrusion Header ........................................................... 22

JIPMB1: IPMB Box Header........................................................................... 22

JUSB1: USB 3.2 Port Box Header ................................................................. 23

JUSB2: USB 2.0 Type-A Connector ............................................................... 23

Contents

FP_I2C_1, RBP_I2C_1, RBP_I2C_2: I2C Box Header................................... 24

JCOM1: COM Port Box Header...................................................................... 24

Motherboard Jumpers............................................................................................... 25

Getting Started............................................................................................................ 26

Necessary Tools ................................................................................................... 26

Safety Precautions................................................................................................ 26

System Setup.............................................................................................................. 27

Drive Bay ..................................................................................................................... 27

Installing 3.5"/2.5" Storage Drive......................................................................... 27

System Cover.............................................................................................................. 28

Removing System Cover....................................................................................... 28

CPU & Heatsink.......................................................................................................... 29

Installing CPU & Heatsink.................................................................................... 30

Memory ....................................................................................................................... 31

Recommended Memory Population..................................................................... 31

Installing Memory Modules.................................................................................. 32

M.2 M Key.................................................................................................................... 33

Installing M.2 M Key ............................................................................................. 33

Slide Rail ..................................................................................................................... 34

Disassembling Slide Rail...................................................................................... 34

Installing Inner Rail to System............................................................................. 35

Retracting Outer Rail Bracket.............................................................................. 36

Attaching Outer Rail Bracket to Rack Frame ...................................................... 36

Installing System into Rack.................................................................................. 37

Detaching Outer Rail Bracket from Rack Frame................................................. 38

Detaching Inner Rail from System....................................................................... 38

4Regulatory Notices

Regulatory Notices

WEEE Statement

Under the European Union (“EU”) Directive on Waste Electrical and

Electronic Equipment, Directive 2012/19/EU, products of “electrical and

electronic equipment” cannot be discarded as municipal waste anymore

and manufacturers of covered electronic equipment will be obligated to

take back such products at the end of their useful life.

Chemical Substances Information

In compliance with chemical substances regulations, such as the EU REACH

Regulation (Regulation EC No. 1907/2006 of the European Parliament and the

Council), MSI provides the information of chemical substances in products at:

https://csr.msi.com/global/index

CE Conformity

Hereby, Micro-Star International CO., LTD declares that this device is in

compliance with the essential safety requirements and other relevant

provisions set out in the European Directive.

FCC-A Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the instruction

manual, may cause harmful interference to radio communications. Operation of this

equipment in a residential area is likely to cause harmful interference, in which case

the user will be required to correct the interference at his own expense.

Notice 1

The changes or modifications not expressly approved by the party responsible for

compliance could void the user’s authority to operate the equipment.

Notice 2

Shielded interface cables and AC power cord, if any, must be used in order to comply

with the emission limits.

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

∙This device may not cause harmful interference, and

∙This device must accept any interference received, including interference that may

cause undesired operation.

Regulatory Notices

Battery Information

Please take special precautions if this product comes with a battery.

∙Danger of explosion if battery is incorrectly replaced. Replace only with the same or

equivalent type recommended by the manufacturer.

∙Avoid disposal of a battery into fire or a hot oven, or mechanically crushing or

cutting of a battery, which can result in an explosion.

∙Avoid leaving a battery in an extremely high temperature or extremely low air

pressure environment that can result in an explosion or the leakage of flammable

liquid or gas.

∙Do not ingest battery. If the coin/button cell battery is swallowed, it can cause

severe internal burns and can lead to death. Keep new and used batteries away

from children.

European Union:

Batteries, battery packs, and accumulators should not be disposed of as

unsorted household waste. Please use the public collection system to

return, recycle, or treat them in compliance with the local regulations.

BSMI:

廢電池請回收

For better environmental protection, waste batteries should be collected

separately for recycling or special disposal.

California, USA:

The button cell battery may contain perchlorate material and requires

special handling when recycled or disposed of in California.

For further information please visit:

http://www.dtsc.ca.gov/hazardouswaste/perchlorate/

a registered trademark of Micro-Star Int’l Co., Ltd. All other marks and names

mentioned may be trademarks of their respective owners. No warranty as to accuracy

or completeness is expressed or implied. MSI reserves the right to make changes to

this document without prior notice.

Technical Support

If a problem arises with your product and no solution can be obtained from the user’s

manual, please contact your place of purchase or local distributor. Alternatively,

please visit https://www.msi.com/support/ for further guidance.

6Safety Information

Safety Information

∙Always read the safety instructions carefully.

∙Keep this User’s Manual for future reference.

∙Keep this equipment away from humidity.

∙Lay this equipment on a reliable flat surface before setting it up.

∙The openings on the enclosure are for air convection hence protects the equipment

from overheating. Do not cover the openings.

∙Make sure the voltage of the power source and adjust properly before connecting

the equipment to the power inlet.

∙Place the power cord such a way that people can not step on it. Do not place

anything over the power cord.

∙Always unplug the power cord before inserting any add-on card or module.

∙All cautions and warnings on the equipment should be noted.

∙Never pour any liquid into the opening that could damage or cause electrical shock.

∙If any of the following situations arises, get the equipment checked by service

personnel:

∙The power cord or plug is damaged.

∙Liquid has penetrated into the equipment.

∙The equipment has been exposed to moisture.

∙The equipment does not work well or you can not get it work according to User’s

Manual.

∙The equipment has dropped and damaged.

∙The equipment has obvious sign of breakage.

∙Do not leave this equipment in an environment unconditioned, storage

temperature above 60°C (140°F), it may damage the equipment.

System Specifications

Model S1102-01

Form Factor 1U

Dimensions 1.71”H (43.5mm) x 17.26”W (438.5mm) x 21.56”D (547.6mm)

Processor ∙1 x AMD® Ryzen™ 7000 series Processors, TDP 105W

-Processor socket AM5

Chipset AMD B-class Chipset

Memory

∙4 x DIMM slots

-Supports DDR5, up to 5200MT/s (2DPC)

-Supports ECC/ non-ECC UDIMM, up to 128GB

Network

∙2 x 1GbE RJ45 ports

-Intel® Ethernet controller I210-AT

-JLANCONN1 (L) support shared NIC*

∙2 x 10GbE RJ45 ports

-Intel® Ethernet controller X710-AT2

-JLAN1 support shared NIC*

* Only one NIC LAN port can be enabled at a time, either JLAN1 or JLANCONN1 (Lower).

Drive Bays ∙4 x 2.5”/ 3.5” SATA hot-swap drive bays (front side)

∙2 x 2.5” SATＡ drive bays (internal)

Internal Storage

∙6 x SATA 3.0 ports (w/ 1 x VCC)

∙2 x M.2 M-Key (PCIe 4.0 x4, 22110/ 2280)

-M2_1*: Choose either M2_1 or PCIE_2 for the desired function.

-M2_2: Supports PCIe 4.0 x4

* The PCIE_2 and M2_1 slots cannot operate simultaneously. You can use the JSEL_M1 jumper

to select which one to enable.

Expansion Slots

∙1x PCIe slot

-PCIE_1*: PCIe 4.0 x16 signal with riser kit, FHHL (111.28mm x 167.65mm)

* The PCIE_1 expansion slot supports PCIe 5.0 x16 signal without a riser kit.

Security ∙TPM 2.0

∙Case intrusion switch

Server

Management

∙Aspeed AST2600 IPMI 2.0 with iKVM

∙1 x GbE RJ45 port (for Mgmt.)

-Chipset: Realtek®RTL8211FD-CG PHY

Cooling ∙1 x Passive CPU heatsink @105W (with air duct)

∙4 x 40mm x 28mm PWM Hot-swap fans

Environmental

∙Operating Temperature: 0°C ~ 40°C

∙Non-operating Temperature: -20°C ~ 70°C

∙Operating Humidity: 0% ~ 85% (non-condensing)

Accessory 1 x Slide Rail Kit (optional)

Power Supply Standard ATX 500W Power Supply

Certications CE, FCC (Class A)

8System Overview

System Overview

1111

4 x 2.5/ 3.5” SATA

Hot-Swap Drive Bays

2233

662299

7788

1010

System Overview

UID Button

The UID (Unit Identification) button help users identify and locate a system,

especially in high-density rack environments.

22USB 3.2 Gen 1 Port

This connector is provided for USB peripheral devices. (Speed up to 5 Gbps)

System Status LED

HDD Activity LED

Power LED

LAN Activity LED

44System Power Button/ LED

COM Port

A COM port, also called a serial port or DB9 connector, is a communication

interface for transferring data between a computer and external devices

such as barcode scanners, printers, and credit card machines. It’s commonly

used for initial system configuration and diagnostics on server boards

and for connecting legacy devices that lack modern interfaces. Users can

connect a specially configured serial cable to establish a serial connection.

66VGA Port

The DB15-pin female connector is provided for monitors.

GbE RJ45 Port (for Mgmt.)

The standard RJ45 LAN jack is provided for connection to the Local Area

Network (LAN). You can connect a network cable to it.

LINK/ACT

LED

SPEED

LED

LED Status Description

Link/ Activity

LED

Off No link

Green Linked

Blinking Data activity

Speed LED

Off 10 Mbps

Orange 100 Mbps

Green 1 Gbps

10 System Overview

GbE RJ45 Port

The standard RJ45 LAN jack is provided for connection to the Local Area

Network (LAN). You can connect a network cable to it.

JLANCONN1 (L)

JLANCONN1 (U)

LINK/ACT

LED

SPEED

LED

LED Status Description

Link/ Activity

LED

Off No link

Green Linked

Blinking Data activity

Speed LED

Off 10 Mbps

Orange 100 Mbps

Green 1 Gbps

10 GbE RJ45 Port

The standard RJ45 LAN jack is provided for connection to the Local Area

Network (LAN). You can connect a network cable to it.

JLAN2 (Right)JLAN1 (Left)

LINK/ACT

LED

SPEED

LED

LED Status Description

Link/ Activity

LED

Off No link

Green Linked

Blinking Data activity

Speed LED

Off 10 Mbps

Orange 1 Gbps

Green 10 Gbps

1010 Power Supply Unit

1111 2.5” SATA Internal Drive Bay

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels MSI Serveur

Manuels Serveur populaires d'autres marques

HP AlphaServer ES47 Manuel utilisateur

Dell

Dell PowerEdge R410 Manuel utilisateur

PowerNAS

PowerNAS CMA Manuel utilisateur

Supero

Supero FatTwin F617R3-FT Manuel utilisateur

Dell

Dell PowerEdge XE9640 Manuel

Dell

Dell PS4100 Instructions de montage

EtroVISION

EtroVISION EV3151 Manuel utilisateur

NEC

NEC Express5800/T110j Manuel utilisateur

HP ProLiant Gen9 Manuel utilisateur

Compaq

Compaq ProLiant 3000 Manuel

Dell

Dell PowerEdge 3YPMN Manuel utilisateur

iRobo

iRobo IPC2U Manuel utilisateur

Nortel

Nortel 1000 Con?guration guide Manuel utilisateur

Asus

Asus AP7500 Manuel d'utilisation et d'entretien

Avid Technology

Avid Technology AirSpeed 5000 Manuel utilisateur

HP Integrity rx2600 Guide d'installation

Milestone

Milestone Husky IVO 350T Manuel utilisateur

Planet

Planet NAS-7410 Manuel utilisateur