MSG Equipment MS004 COM Manuel utilisateur
USER MANUAL
MSG MS004 COM
QUALITY UNIQUENESS
INNOVATION TRAININGSERVICE
WARRANTY
2017.05.16
TEST BENCH FOR DIAGNOSTICS OF ALTERNATORS,
STARTERS AND VOLTAGE REGULATORS
2
1. DESCRIPTION ......................................................................................................................................................3
2. TECHNICAL CHARACTERISTICS........................................................................................................................4
3. RECEIPT AND INSPECTION................................................................................................................................6
4. TEST BENCH DESCRIPTION...............................................................................................................................6
4.1 Mounting Face and Front Panel...........................................................................................................6
4.2 Control Units..............................................................................................................................................8
4.2.1 Display. Data Output...................................................................................................................9
4.2.2 Buttons............................................................................................................................................14
4.2.3 Terminals ........................................................................................................................................15
4.2.4 Adjustment Knobs........................................................................................................................16
5. SETTING INTO OPERATION..............................................................................................................................16
5.1 Connection.................................................................................................................................................16
6. STEP-BY-STEP INSTRUCTION..........................................................................................................................18
6.1 Alternator Testing.....................................................................................................................................18
6.2 Starter Testing ...........................................................................................................................................20
6.3 Voltage Regulator Testing......................................................................................................................20
7. TEST CERTIFICATE...............................................................................................................................................21
APPENDIX 1.................................................................................................................................................................22
APPENDIX 2.................................................................................................................................................................24
APPENDIX 3.................................................................................................................................................................27
User Manual - Test Bench MSG MS004 COM
CONTENTS
3
User Manual - Test Bench MSG MS004 COM
1. DESCRIPTION
MSG MS004 COM is a table multifunctional test bench. The equipment is used for quick and
quality diagnostics of starters, alternators and voltage regulators without applying any additional
measuring devices.
The test bench possesses high power, thus, units can be diagnosed under different loads. The
equipment has small dimensions, it can be placed both in small service centers and big shops
specialized in selling equipment.
The bench includes the following diagnostic functions: testing of 12V and 24V alternators under load,
12V and 24V voltage regulators, 12V and 24V starters in idle running mode. The device carries out
testing of different alternators under load up to 100A. Power supply is single-phase 220V. Connection
of the 2nd battery is conducted from outside to the terminals on the bench body to achieve power
supply of 24V for more convenient connection. Thus, usage of the 2nd battery is optional.
New algorithms of testing have been implemented, meter accuracy has also been improved.
4
2. TECHNICAL CHARACTERISTICS
Supply voltage, V 230±10% or 110±10%
Supply type Single-phase
Battery model (not concluded in the set) Bosch 0092S50010 or similar
Battery charge 1 Уеs
Battery charge 2 No
Dimensions, mm (length, width, height) 570*490*450
Weight, kg 70
Testing of alternators
Voltage, V 12/24
Drive power, kW 2.2
Load 12V/24V, А 0-100/0-50
Load adjustment Smoothly
Drive rotation, rpm 0-3000
Drive rotation direction Both directions
Transmission type (drive/alternator) Belt
Fig. 1. MS004 COM
User Manual - Test Bench MSG MS004 COM
5
User Manual - Test Bench MSG MS004 COM
Belt type V belt
Poly-V belt
Connection terminals COM (LIN, BSS), P-D, DFM, D+, RLO, C, SIG, F
Read parameters
- Voltage
- Alternating current
- Constant current
- Drive rotation
- COM voltage regulators: protocol, speed
of exchange, protocol type, errors
Testing of starters
Voltage, V 12/24
Power, kW Up to 4
Measured parameters
- Voltage
- Alternating current
- Constant current
Testing of voltage regulators
Voltage, V 12/24
Tested parameters
- Stabilizing voltage
- Current through rotor winding
- COM voltage regulators: protocol, speed
of exchange, protocol type, errors
Voltage meter accuracy, V 0.1
Ampere meter accuracy, А 0.1
Short circuit protection Yes
Short circuit sound alert Yes
Connection terminals COM (LIN, BSS), P-D, DFM, D+, RLO, C, SIG
Total check, sec 30 and longer
6
3. RECEIPT AND INSPECTION
Check the set received. It must contain:
• test bench
• 2 cables for external battery connection (Fig. 19)
• wires to connect an alternator, starter, voltage regulator to the bench sockets
• User Manual
Inspect the test bench for existence of damage. If it is found, please contact either the manufacturer
or trade representative before launching the equipment.
WARNING! In case of obvious damage, use of equipment is forbidden.
Mounting face consists of (Fig. 2):
- Chain fixer 1
- Chain 2
- Belts 3,4
- Covers 5 (battery box cover 1).
The chain fixer (1) is used to latch the chain (2).
The belts (3) and (4) are used to transfer engine torque of the bench on a tested pulley of an
alternator.
The battery 1 is placed under the cover (5).
4. TEST BENCH DESCRIPTION
4.1 M F F P
User Manual - Test Bench MSG MS004 COM
Front panel consists of (Fig. 3):
- Test bench emergency deactivation 6
- Test bench activation 7
- Power cables 8 и 9.
7
User Manual - Test Bench MSG MS004 COM
Fig. 2. MS004 COM - Mounting face
Fig 3. MS004 COM - Front panel
8
Button 6 is specified as STOP. It is used for emergency deactivation of the bench.
Button 7 is specified as ON/OFF. It is used for activation/deactivation of the bench. When button 6
is on, button 7 is out of operation.
Power cable 8 is specified as В-. It is used to connect power negative potential of an alternator or
starter.
Power cable 9 is specified as В+. It is used to connect power positive potential of an alternator or
starter.
4.2 C U
Fig. 4. MS004 COM - Control Panel
User Manual - Test Bench MSG MS004 COM
1 –Display; 2– Sockets; 3– Buttons; 4– Adjustment knobs
9
User Manual - Test Bench MSG MS004 COM
• VOLTAGE, DC: generation voltage indicator (alternator testing) or consuming voltage indicator
(starter testing).
• DFM,%: indicator of load on an alternator.
• AMP, DC: constant current indicator. Generation indicator (alternator testing) or consuming
voltage indicator (starter testing).
• AMP, AC: alternating current indicator.
• TACHOMETER: drive rotation indicator. It is not used when testing a starter.
• D: indicator of set generation voltage when testing alternators with P-D terminal (Fig. 6).
• P: stator winding frequency indicator when testing alternators with P-D terminal (Fig. 6).
• С: indicator of set generation voltage when testing alternators with С terminal (Fig. 7).
• RLO: indicator of set generation voltage when testing alternators with RLO terminal (Fig. 8).
• SIG: indicator of set generation voltage when testing alternators with SIG terminal (Fig. 9).
• PROTOCOL: voltage regulator protocol indicator (alternators with COM terminal only) (Fig. 10).
• BAUD: indicator of data exchange speed indicator of a voltage regulator (alternators with COM
terminal only) (Fig. 10).
• COM: indicator of set generation voltage when testing alternators with COM terminal (Fig. 10).
• ID/TYPE: ID and voltage regulator type indicator (alternators with COM terminal only) (Fig. 10).
• ERROR: voltage regulator error indicator (alternators with COM terminal only) (Fig. 10).
• VOLTAGE REG: indicator of set generation voltage (alternators without a voltage regulator only)
(Fig. 11).
4.2.1 D. D
Display Data Output when Testing an Alternator or Starter
Display Indicators
10
Fig. 5. Display data output when
testing an alternator with D+ terminal
or a starter
Fig. 6. Display data output when
testing an alternator
with P-D terminal
Fig. 7. Display data output when
testing an alternator
with С terminal
Fig. 8. Display data output when
testing an alternator
with RLO terminal
User Manual - Test Bench MSG MS004 COM
Autres manuels pour MS004 COM
1
Table des matières
Autres manuels MSG Equipment Équipement de diagnostic
