MR TAPCON 230 Manuel utilisateur

Voltage Regulator TAPCON®230 basic

Quick reference guide 2117248/02

Copying and distribution of this document and the utilization

and communication of its contents are strictly prohibited

unless expressly authorized.

Offenders will be held liable for the payment of damages. All

rights reserved in the event of the grant of a patent, utility

model or ornamental design registration.

The product may have been modified after this document

went to press.

We expressly reserve the right to make changes to the

technical data, the design or the scope of delivery.

Generally, the information provided and the arrangements

agreed during processing of the relevant quotations and

orders are binding.

The original operating instructions were drawn up in German.

1 Introduction

This technical file contains information for quickly

starting up the voltage regulator. It does not pro-vide

comprehensive operating instructions.

This technical file is intended solely for specially

trained and authorized personnel.

1.1 Manufacturer

The voltage regulator is manufactured by:

Maschinenfabrik Reinhausen GmbH

Falkensteinstraße 8

93059 Regensburg, Germany

Tel.: (+49) 9 41/40 90-0

Fax: (+49) 9 41/40 90-7001

E-mail: [email protected]

Further information on the product and copies of this

technical file are available from this address or on our

website at www.tapcon230.com if required.

1.2 Completeness

This technical file is only complete in conjunction with

the supporting documentation.

1.3 Supporting documents

The installation and commissioning instructions, the

operating instructions and the accompanying connec-

tion diagrams also apply in addition to this technical

file. All documents form part of the scope of delivery.

In addition, generally applicable statutory and other

binding regulations in European and national legisla-

tion and the regulations for accident prevention and

environmental protection in force in the country of use

must be complied with.

1.4 Safekeeping

This technical file and all supporting documents must

be kept ready to hand and accessible for future use at

all times.

2 Safety

This technical file does not replace the Operating

Instructions for the voltage regulator. The quick refer-

ence guide contains information that will provide a

rapid introduction to operating the voltage regulator.

•For detailed operation and safety information

please read carefully through the voltage regulator

operating instructions.

• Pay particular attention to the information in the

chapter on safety in the operating instructions.

3 Product description

3.1 Description of the front panel

Figure 1 TAPCON®230 front panel

1LEDs 1...10

2Setting options for display contrast

3Labeling strip for LEDs

4F1...F5: Function and menu selection keys

5Display 128X128 LCD module negative blue, LED back-

ground white

6Menu selection

7Escape

8Accept entry

9Switching windows within a menu level

10 Parametering interface COM 1 (RS232)

11 Automatic voltage regulation (with auto mode LED green)

12 Manual mode (with manual control LED green)

13 Remote control (with Local/Remote LED green)

14 Control for RAISE/LOWER

15 Status LED

3.2 Description of the display

Figure 2 Main screen

1Status line

2Actual value display in V/kV

3Desired value display in V/kV

4Control deviation

5Time bar

6Desired value deviation trend

3.3 Description of key functions

RAISE In manual mode the motor-drive unit can be oper-

ated directly using the RAISE key.

LOWER In manual mode the motor-drive unit can be oper-

ated directly using the LOWER key.

REMOTE Activates the "Remote" operating mode. In this

case, manual operation of the RAISE, LOWER,

MANUAL and AUTO keys is disabled.

MANUAL Manual mode. For manual control of the motor-

drive unit and parameterization of the voltage reg-

ulator.

AUTO Auto mode. Voltage is controlled automatically.

Arrow keys

NEXT /

In auto and manual mode, the measured value

display can be set using the arrow keys.

They can also be used to switch between win-

dows in the submenus.

ENTER Confirms or saves a changed parameter in the

parameter menu.

ESC Pressing the ESC key transfers you to the menu

level above, in other words, always back one

menu level.

MENU Pressing this key displays the menu selection win-

dow.

Autres manuels pour TAPCON 230

Table des matières

Autres manuels MR Contrôleurs

MR ECOTAP VPD CONTROL PRO Manuel utilisateur

MR TAPCON Manuel utilisateur

MR tapcon 230 pro Manuel utilisateur

MR TAPCON 260 Manuel utilisateur

MR TAPCON 230 Manuel utilisateur

MR TAPCON 250 Manuel utilisateur

MR TAPCON 230 Expert Manuel utilisateur

MR tapcon 230 pro Manuel utilisateur

MR tapcon 240 Manuel utilisateur

MR TAPCON 260 Manuel utilisateur

MR tapcon 240 Manuel utilisateur

MR TAPCON 230 basic Manuel utilisateur

MR TAPCON 250 Manuel utilisateur

MR TAPCON 250 Manuel du propriétaire

MR TAPCON 230 basic Manuel utilisateur

MR VACUTAP VM Series Manuel utilisateur

MR TAPCON 230 VC Manuel utilisateur

MR TAPCON 230 AVT Manuel du propriétaire

MR TAPCON Manuel utilisateur

Manuels Contrôleurs populaires d'autres marques

Digiplex

Digiplex DGP-848 Mode d'emploi

YASKAWA

YASKAWA SGM series Manuel utilisateur

Sinope

Sinope Calypso RM3500ZB Manuel utilisateur

Isimet

Isimet DLA Series Style 2 Manuel d'installation

LSIS

LSIS sv-ip5a Manuel utilisateur

Rockwell Automation

Rockwell Automation 1769-L31 Manuel utilisateur

Airflow

Airflow Uno hab Manuel utilisateur

ABB

ABB ACS580-01 drives Manuel utilisateur

Panasonic

Panasonic GM1 Series Manuel utilisateur

Emerson

Emerson SW93 Manuel utilisateur

AutoAqua

AutoAqua Smart ATO micro SATO-120P Manuel utilisateur

Panasonic

Panasonic FP? Positioning Unit RTEX Manuel utilisateur

Samson

Samson Type 5824 Manuel de service

Alpha IP

Alpha IP MIOB 21001 Manuel utilisateur

Siemens

Siemens OpenAir GMA 1 Series Manuel utilisateur

Surecom

Surecom SR-629 Manuel utilisateur

Fishman

Fishman TriplePlay Manuel utilisateur

Regulus

Regulus SRS1 T Manuel utilisateur