1. Description
The hydraulic lters are components intended for use in potentially explosive atmospheres to remove the contaminants
from the hydraulic uids used in the hydraulic systems. FZX lters are made of stainless steel to meet extreme
conditions and corrosive environments, with maximum pressure up to1000 bar, ow rate up to10 l/min.
2. General warnings
- Before the installation, use or maintenance of the lter carefully read the manual
- The system and the lter are pressurised! Be sure the system is at ambient pressure before starting any activity
- The uid temperature inside the system and the lter can cause injuries to personnel or create a hazardous
environment
- Any activity must be carried out by trained and certied specialists, they must use the correct protective equipment
- Any activity must be carried out using the correct tool
- Any activity must be carried out in accordance with the laws in force in the country where the system is in
operation
- The data shown onto the nameplate must be complete and legible during the whole lter working life
- Connect the lter with an anti-loosening system and regularly check the condition of the connection
- The declared performances and the safety of the product are only guaranteed when MP Filtri original spare parts
are used
- Warranty is only effective if MP Filtri original spare parts are used.
3. Tools
FZX011 TOOL TIGHTENING TORQUE
Bowl Wrench A/F 36 50 N∙m
Connection G 1/4 Wrench A/F 19 Max 35 N∙m
Connection 1/4-18 NPT Wrench A/F 14 Max 28 N∙m
Connection G 1/2 Wrench A/F 27 Max 65 N∙m
Connection 1/2-14 NPT Wrench A/F 24 Max 54 N∙m
Fastening screws M8 Socket wrench A/F 13 25 N∙m
Fastening screws 5/16-18 UNC Socket wrench A/F 1/2" 25 N∙m
Stainless steel high pressure lters
2
EN
