MPA Mini Series Manuel d'instructions
ADJUSTABLE
MULTISPINDLE
HEADS
MANUAL ON USE
AND MAINTENANCE
TOOLS TO SHAPE THE WORLD
MADE IN
ITALY
COMUNITÀ
EUROPEA
UT1811 - 1010 - UK01
Page 2/32
ADJUSTABLE MULTISPINDLE HEADS
Page 2/32
Dear Customer,
We thank you for having chosen MPA and we hope that it fully satisfies your expectations,
guaranteeing a high quality production.
We kindly request you to read the instructions provided in this manual before starting to use
the product, as they provide important information on how to use and service the product in
absolute safety.
This manual also provides the technical features of the product, (also visible on the website:
www.m-p-a.it).
All rights reserved; this manual can be reprinted or reproduced only prior to formal written
authorisation by MPA srl.
Yours faithfully
MPA srl
Introduction
UT1811 - 1010 - UK01
Page 3/32
ADJUSTABLE MULTISPINDLE HEADS
Page 3/32
Manufacturer’s declaration
EEC MACHINE DIRECTIVE
MANUFACTURER’S DECLARATION
MPA srl
Via Pizzoli, 3 - Bargellino Cà Bianca
40012 Calderara di Reno (Bo) Italy
in the Person of the Legal Representative
declares that the adjustable multispindle heads
are compliant with the provisions of the
Machinery Directive 2006/42/EC
and forbids the start-up
before the machine in which the special series head
has to be fitted in is declared compliant with
Machinery Directive it self.
Signature of issuer
Marco Ceneri
EUROPEAN
COMMUNITY
UT1811 - 1010 - UK01
Page 4/32
ADJUSTABLE MULTISPINDLE HEADS
General warranty conditions
Page 4/32
General warranty conditions
Proper use and maintenance of the head will ensure that it stays in good working order.
Any modification, tampering, or improper use relieves MPA from all liability for accidents or
damage to persons or things occurring during the use the head.
MPA guarantees this product against material and manufacturing defects for a period of 12
months, considering ordinary usage. The use of non-original spare parts or failure to follow
the instructions provided in this manual will void the warranty. MPA guarantees exclusively
the repair or replacement of parts found to be defective by its service centre. MPA remains at
your complete disposal for any clarification and to provide any technical support necessary
for achieving the best performance of the head.
MPA reserves the right to make any modifications to all parts that are believed to be necessary
to improve the quality of the product without prior notice.
UT1811 - 1010 - UK01
Page 5/32
ADJUSTABLE MULTISPINDLE HEADS
Index
INDEX
Introduction....................................................................................................................2
Manufacturer’s declaration.............................................................................................3
General warranty conditions..........................................................................................4
1 GENERAL NOTES........................................................................................................7
1-1 Purpose of the document......................................................................................7
1-2 Symbols ................................................................................................................7
1-3 Main information ...................................................................................................8
1-4 Standard references .............................................................................................8
1-5 Noise level ............................................................................................................8
1-6 Packaging .............................................................................................................8
1-7 Transport...............................................................................................................9
1-8 Storage .................................................................................................................9
1-9 Disposal ................................................................................................................9
2 IDENTIFICATION ........................................................................................................11
2-1 Manufacturers’ Data............................................................................................11
2-2 Head identification data ......................................................................................11
3 MAIN DESCRIPTION..................................................................................................13
3-1 Intended use .......................................................................................................13
3-2 Improper use.......................................................................................................13
4 SAFETY RULES .........................................................................................................15
5 TECHNICAL FEATURES............................................................................................17
6 MACHINE CONNECTION ..........................................................................................19
6-1 Heads suitable for installation to units and drilling/tapping machines.................19
6-2 Special applications ............................................................................................20
7 INSTALLATION...........................................................................................................21
7-1 Balancing ............................................................................................................22
8 ADJUSTMENT............................................................................................................23
9 ASSEMBLY TOOLS AND ADJUSTING......................................................................25
9-1 ER collet DIN 6499 shape B ...............................................................................25
9-2 Tools adjustment and clamping ..........................................................................26
10 MAINTENANCE..........................................................................................................27
10-1 Personnel in charge ............................................................................................27
10-2 Scheduled maintenance .....................................................................................27
11 AFTER-SALES SERVICE AND SPARE PARTS ........................................................29
11-1 Customers service..............................................................................................29
11-2 Spare parts service.............................................................................................29
UT1811 - 1010 - UK01
Page 6/32
ADJUSTABLE MULTISPINDLE HEADS
Index
UT1811 - 1010 - UK01
Page 7/32
ADJUSTABLE MULTISPINDLE HEADS
1 General notes
1 GENERAL NOTES
1-1 Purpose of the document
The information in this manual has been provided to highlight the operations necessary for
the end user to correctly use and service the MPA heads. Information concerning installation,
adjustment and maintenance relating to the head you have purchased can be found in this
document.
Special attention has been given to questions matters involving the safety and safeguard of
the operators’ security, together with the safeguard and respect of the work area.
Before using the multispindle head, read carefully this manual and, in case of doubts, contact
the MPA After-sales technical service.
1-2 Symbols
In order to direct the readers’ attention on particularly important points in this manual, the
following graphs have been used:
DANGER Indicates an operation that must be carried out scrupulously in that it may
expose the operator to serious injuries.
IMPORTANT Indicates an operation that may cause damages to the adjustable head,
or simply recall the attention of the reader on certain particularly important
operations.
ADJUSTMENT Indicates adjusting operations. The operations marked with this symbol must
be carried out by technically qualified staff and with adequate mechanical
knowledge.
UT1811 - 1010 - UK01
Page 8/32
ADJUSTABLE MULTISPINDLE HEADS
1 General notes
1-3 Main information
To obtain maximum product yield in time, we recommend complying with the following
notes:
• Ensure to have correctly installed the multispindle head to the machine.
While choosing the connection to the tool machine, verify compatibility with the
declared performances.
The MPA head can be fitted to a tool machine equipped with regulatory accident-
prevention protections and in compliance with Machinery Directive 2006/42/EC.
• Absolutely avoid any improper use of the equipment and work with care and attention.
• Carry out regularly all routine maintenance interventions (see chap. 10).
• Use only original MPA spare parts (see chap. 11).
1-4 Standard references
The MPA head you have purchased is compliant with Machinery Directive 2006/42/EC (ex
98/37/EC).
1-5 Noise level
The MPA head complies with current Standards with regard to noise levels.
The manufacturer of the machine on which the head is fitted must provide the data
concerning the noise levels in the relative manual.
1-6 Packaging
The multispindle head you have purchased is supplied packed in cardboard boxes and
protected with shock-resistant protections.
IMPORTANT Upon receipt, check that the supply corresponds to the order specifications and
that no damages have occourred during the transport. In case of anomalies,
do not use the head and contact the manufacturer immediately.
Packaging must be disposed of in compliance with the local waste disposal Standards.
UT1811 - 1010 - UK01
Page 9/32
ADJUSTABLE MULTISPINDLE HEADS
1 General notes
1-7 Transport
During transport, keep in mind that you are handling a precision tool requiring adequate
caution. When carrying out the operation, observe the safety Standards in force with regard
to safety at work.
DANGER Do not disassemble, transport or re-assemble the head with tools fitted in
the spindles, as the sharp cutting parts could cause injuries.
For models with a weight above 10 kg, use a suitable hoisting mean for the operation.
1-8 Storage
In case you don’t use the head for a long time, it is a good rule to clean the head and to
protect it against salty, damp or chemically aggressive environments.
IMPORTANT
For inactivity periods of more than 6 months,before start-up, we recommend
to replace the lubricant inside the head (see chap. 10).
1-9 Disposal
The MPA heads are manufactured using the following substance:
• aluminium;
• steel;
• cast iron;
• lubricants.
IMPORTANT The head must be disposed of per type of substance, in strict compliance with
the legal regulations with regard to recycling and management of waste in
force in the country where the head is used.
In particular, exhaust lubricants must not be thrown outdoors but must
be handed over to specialised and authorised waste collection centres.
UT1811 - 1010 - UK01
Page 10/32
ADJUSTABLE MULTISPINDLE HEADS
1 General notes
Ce manuel convient aux modèles suivants
15
Table des matières
Manuels Accessoires pour outils électriques populaires d'autres marques
ADAMAS
ADAMAS B32 Manuel utilisateur
STEINEL PROFESSIONAL
STEINEL PROFESSIONAL 4007841009595 Manuel utilisateur
Echo
Echo Speed-Feed Universal 400 LH/RH Manuel utilisateur
SCHUNK
SCHUNK ROTA TB-TBS-EP Instructions d'utilisation
Schmid
Schmid RAPID Secure XL Manuel utilisateur
Drill Master
Drill Master 360X Manuel utilisateur
