MOYA iSPA Manuel utilisateur
FCC WARNING
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
To maintain compliance with FCC’s RF Exposure guidelines, This equipment should be
installed and operated with minimum distance between 20cm the radiator your body: Use
only the supplied antenna.
11
0.05 ± 0.01PPM
SMART
TOUCH PANNEL
Specifications for iSPA
5.6 KG
T
测试復位使用前应进行测试
ENERGY EMITTING
SOFT PAD
LEAKAGE
PROTECTION PLUG
iSPA
Illustration of i-SPA Components
12
The control panel is divided into upper and lower areas, namely, status
display area and functional control area.
Status display area: display usage time, air quantity , ozone status, lock,
Bluetooth connection and other device status.
The functional control area adopts the touch control mode, and the user can
touch the opening equipment, air quantity, time length and other related
operations.
Status
Display
Area
Functional
Control
01
02
03
04 Air volume
Time
Automatic cycle indicator
Time status bar
Bluetooth indication
Lock in the indicator
Air volume status bar
ozone indicator
Power
Time
Ozone
Air volume
Status display area
Functional control
01 02
03
04
0506
07
08
Control Panel Introduction
13
Equipment Operation Instructions
Before starting the machine, please confirm that the equipment power
plug is installed on the leakage protector equipped with the product (see the
'leakage protector' on the next page), and check whether the power supply
is normal, the equipment power indicator is on, indicating that the power
supply is normal.
Lock panel
Keep pressing the power button ( ) on the control panel for three
seconds to lock the indicator light.Open panel lock mode, pressing any
control key on the equipment panel; continuously press power key ( ) for
three seconds.
Start and close equipment
When the power supply is connected to the indicator light and turns on,
press the power button ( ) to start the device.The equipment is automati-
cally set to high speed mode, running for 15 minutes, the ozone is turned on;
press the power button ( ) again to close the power equipment.
Time adjustment Please adjust the time adjustment knob in the function-
al control area ( ), You can adjust the time.
Time adjustment
Time setting is divided into: minutes, minutes, minutes, automatic
cycle mode.
Note: When the automatic circulation indicator lamp () is on, the equipment
will enter the automatic continuous operation mode.
Please adjust the air volume adjustment knob ( ) in the functional
control area.
Air volume adjustment
Wind volume adjustment with wind volume and small wind volume to
provide user choice in cycle mode.
Touch the ozone button（）,on the control panel to turn the ozone
function on or off.
Opening and closing ozone (O�)
Mobile Bluetooth Control
The APP in the iphone
Store searches for "GSPA"
or scans the QR code above
the iOS app and downloads
it on the mobile client.
scan the QR code above the
Android app and download
and install it on the mobile
client. * lease confirm the
Bluetooth permission in wechat.
Scan the QR code of the
above WeChat small program
or type "i巨晴摩雅" in Weixin
search to install WeChat .
iOS Android Wechat
The MOYA iSPA R30 has a Bluetooth wireless connection function, using
the mobile client connection steps:
1) Turn on Bluetooth online in the phone.
2) Download and install the following "GSPA" mobile application or wechat
applet to add attention.
3) After the installation or attention, open the application to add the device
and make online matching, you can use the mobile phone to control the
device.
Leakage Protection Plug
Test
T
测试復位使用前应进行测试
This device is to ensure the equipment to
operate under normal and safe conditions.
The status and steps in use are as follows:
1. Leakage protection test: Click the "reset"
button, the indicator lights up, indicating the
power is normally on; click the "test" button
to turn it off, indicating the leakage protection
is effective;
2. Click the "reset button" and the indicator
lights up, and the iSPA can be used normally.
3. Before every usage, please follow the above
steps for testing
14
15
Installation of iSPA
20cm
160cm~162cm
iSPA Equipment Mount on Wall
iSPA Eauipment mount on the
GRANDMOYA
16
Connect both ends of the pipe to iSPA
machine and bubble pad until tight
enough. Comfirm two connection is
stable for each usage.
To disconnect the pipe from the Soft Mat,
please screw out the connector lightly.
Proper Handling of Soft Pad
17
Notice : Not everyone suits a SPA bath
Anti-Slip
Ventilation
The machine should installed at least one meter
higher than the bathtub, to avoid any dangerous
caused.
When the electric wire damaged, please call the
manufacturer's maintenance dapartment or
specialist.
※※WARNING
Safety Precautions for SPA Bath
1.Maintain cleanliness and good ventilation in the bathroom. Do not use it
in a badly-ventilated bathroom (when necessary, keep the bathroom door
open to allow for good ventilation).
2.Do not install gas or heater in the bathroom and/or use it.
3.During bath, do not lock the door and ask families to pay attention to
safety.
4.Do not submerge in the SPA for prolonged period under high temperature
or beyond one's health capacity. Otherwise, it may cause dizziness and
other dangers. Before bathing, please check that the temperature is safe
and suitable.
5.Do not submerge in the SPA for prolonged period as it may cause fatigue.
Ideally, each session should not exceed 15 minutes.
6.For those who use it for the first time or non frequent users, they should
not be submerged in water of too high temperature and should keep the
spa session short. They should put their arms outside the tub.
7.Do not use it when one is too full, too hungry or has consumed alcohol,
too tired or in an excitable state.
8.Refrain from keeping eyes opened when fully submerged.
9.Safety precaution is particularly important for young children, pregnant
women and the elderly. When using the SPA, they shall be accompanied
by family members or healthcare attendant.
10.Those suffering from hypertension, heart diseases, epilepsy and unhealed
wounds, or other diseases are not advised to use the SPA.
11. During bath, when one feels giddy or experiences chest distress, one
should immediately stop using the SPA, use wet towels to wipe and cool
down the forehead, cheek and arm, and place the hands on the bathtub
for support to stand up slowly until the breathing returns to normal.
12.When one goes in and out of bathroom or
bathtub, one should take precautions
against slippery floors to avoid slip or falls
due to the wet floor.
18
Four Principles of Bathing Safety
Sit high with your hands
on the bathtub
The water temperature
is below 40 ℃Do not take a bath if you feel unwellNo more than
10 minutes
Table des matières
