Moxa Technologies MPC-2000 Series Manuel utilisateur

P/N: 1802022600032

*1802022600032*

MPC-2000 Series

Quick Installation Guide

Version 2.1, January 2021

Technical Support Contact Information

www.moxa.com/support



- 2 -

Overview

The MPC-2000 series panel computer features advanced Intel

processors—3rd generation Ivy Bridge Core or Celeron—matched to 4 GB

of system memory, delivering a reliable, high-performance marine

computing platform of wide versatility. With its RS-232/422/485 serial,

NMEA 0183, and Gigabit Ethernet LAN ports, the MPC-2000 series

supports a wide variety of serial- and marine-specific interfaces with

high-speed network communications and native network redundancy.

The MPC-2000 series comes with a range of standard display

enhancements useful in industrial environments (including 0 to 100% full

range dimming, 178°/178° wide viewing angles, optional optical bonding,

and/or a multi-touch screen), as well as Moxa’s innovative SavvyTouch

display controls.

The following lists the models in the MPC-2000 series:

•MPC-2260X/MPC-2267X: 26-inch panel computer

•MPC-2240X/MPC-2240Z/MPC-2247X: 24-inch panel computer

•MPC-2190X/MPC-2190Z/MPC-2197X: 19-inch panel computer

Package Checklist

Before installing the MPC-2000 series, verify that the package contains

the following items:

•1 MPC-2000 series panel computer

•2 keys for the locking, removable mass storage trays

•1 terminal block for DC power input

•4 5-pin Euroblock terminals for NMEA 0183 v2 interfaces

•Quick installation guide (printed)

•Warranty card

NOTE: Please notify your sales representative if any of the above items

are missing or damaged.

Hardware Installation

NOTE

Unless otherwise specified, graphics shown for the MPC

2260 are

for example.

- 3 -

MPC-2240/MPC-2260

MPC-2190

SavvyTouch Display Control Buttons

The following table describes the SavvyTouch display controls on the

front panel of the MPC-2000 series. These intelligent controls will light up

with a simple wave over the area of the screen where they are located.

Name

Color

Control Function/Color Legend

Power

Green Computer is powered on and functioning

normally.

Red

Power on standby and system is shut

down.

Off

Power is off.

Brightness

White +: To increase brightness of display panel.

-: To decrease brightness of display panel.

Info

Off System is functioning normally.

Red System hardware error has occurred.

Display

mode

(ECDIS

models

only)

White Displays the brightness mode.

Off

Brightness of display panel is out of ECDIS

standard range.

Storage

Red (on)

Storage drive is functioning properly.

Red

(blinking)

Accessing or writing data to storage drive.

Off

Storage drive is offline.

- 4 -

Installing the MPC-2000 Series

Desktop

The MPC-2000 series comes with optional brackets that allow you to

install the display on a horizontal surface, such as a desktop. Three round

screws are required for each bracket. See the figure for detailed screw

specifications and their torque values.

Place your MPC-2000 series display on a clean, flat, well-ventilated

desktop. To protect the computer from overheating, leave some

ventilation space between the MPC-2000 series and other equipment.

Do NOT place equipment or objects on the panel, as this might damage

internal components.

Wall Mounting

The MPC-2000 series comes with optional clamp mounts for installation

onto a wall (where space has been cut out to accommodate the rest of the

hardware) or into computing stations where a flush mount is desired.

For a secure mounting, use all 14 clamps on the MPC-2260 and MPC-2240,

or use 10 clamps on the MPC-2190.

The clamp arms are fastened into slots on all four sides of the MPC-2000

series. Use the short M4 SUS screws to fasten the clamp arms to the

MPC-2000 series mounting slots, as shown in the following figure. Next,

use the clamps to fasten the MPC-2000 series to its mounting point; note

the torque value as shown in the figure.

- 5 -

VESA Mounting

The MPC-2000 series also comes with an optional VESA mounting kit. Six

flat screws and four round screws are required to attach the VESA

mounting bracket. See the following figure for detailed screw

specifications and torque values.

An additional four screws (not included in the kit) are required to mount

the MPC-2000 series on a VESA rack. For this purpose, use M6 screws

with a length between 10 and 12 mm.

Connector Description

Extending the Display

The MPC-2000 series comes with both standard VGA (DB15) and DVI-D

(DB29) interfaces (on the bottom panel) that can be used to

simultaneously display across two monitors.

Connecting to a Keyboard and Mouse

The MPC-2000 series comes with

two PS/2 connectors located on the

bottom panel for connecting a

keyboard and a mouse.

- 6 -

Serial Ports

The MPC-2000 series has two software-selectable RS-232/422/485 DB9

serial ports. Refer to the MPC-2000 Series Hardware Manual for

information on serial port configuration. The pin assignments for the ports

are shown in the following table.

Pin RS-232 RS-422

RS-485

(4-wire)

RS-485

(2-wire)

DCD

TxDA(-)

–

RxD

TxDB(+)

–

TxD

RxDB(+)

DataB(+)

DTR

RxDA(-)

DataA(-)

GND

DSR

–

RTS

–

CTS

–

Ethernet Ports

The pin assignments for the two Gigabit Ethernet 100/1000 Mbps RJ45

ports are shown in the following table.

100 Mbps

1000 Mbps

ETx+

TRD(0)+

ETx-

TRD(0)-

ERx+

TRD(1)+

–

TRD(2)+

–

TRD(2)-

ERx-

TRD(1)-

–

TRD(3)+

–

TRD(3)-

The following table describes the LAN LED indicators.

LAN

(on connectors)

Green

100 Mbps Ethernet mode

Yellow

1000 Mbps (Gigabit) Ethernet mode

Off

No activity or 10 Mbps Ethernet mode

NMEA Ports

The MPC-2000 series comes with eight NMEA

ports on the bottom

panel. The figure shows

the

pin assignments.

- 7 -

Powering the MPC-2000 Series On or Off

To power on the MPC-2000 series, connect the Terminal Block to

Power Jack Converter to the MPC-2000 series DC terminal block

(located on the bottom panel) and then connect a power adapter; or,

alternately, you may power the device using the AC power cord.

Touch the MENU button (in the lower right corner of the display panel) for

one second to turn on the computer. It takes about 10 to 30 seconds for

the system to boot up.

To power off the MPC-2000 series, touch the MENU button for four

seconds; depending on the power management settings of the operating

system, you can select the “standby”, “hibernation”, or “system

shutdown” mode.

If you encounter any technical problems, touch the MENU button for 10

seconds to force the system to shut down.

NOTE

If the MPC-2000 series is powered using a DC converter, the

system displays

Fail for the AC power status in the INFO

dialog.

This does not affect the operation of the MPC-2000 series.

Grounding the MPC-2000 Series

Proper grounding and wire routing help to limit the effects of noise from

electromagnetic interference (EMI). Run the ground connection from the

ground screw to the grounding surface prior to connecting the power

source.

For detailed information on setup and configuration, refer to the

MPC-2000 Series Hardware Manual, which you can download from the

Moxa company website at www.moxa.com.

Autres manuels pour MPC-2000 Series

Table des matières

Autres manuels Moxa Technologies Écran tactile

Moxa Technologies

Moxa Technologies MPC-2190 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MPC-2240 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MPC-2240 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MPC-2150 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MPC-2121 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MPC-122-K Manuel utilisateur

Moxa Technologies

Moxa Technologies MPC-2150 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies EXPC-1319-STS-W7E Manuel utilisateur

Moxa Technologies

Moxa Technologies EXPC-1319 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies MPC-2190X Manuel utilisateur

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

AMX

AMX AXP-PPC Mode d’emploi

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur