Moxa Technologies PTC-101 Series Manuel utilisateur

P/N: 1802001016015

*1802001016015*

PTC-101

Quick Installation Guide

Moxa Industrial Media Converter

Edition 5.1, November 2017

Technical Support Contact Information

www.moxa.com/support

Moxa Americas:

Toll

-free: 1-888-669-2872

Tel:

1-714-528-6777

Fax:

1-714-528-6778

Moxa China (Shanghai office):

Toll

-free: 800-820-5036

Tel:

+86-21-5258-9955

Fax:

+86-21-5258-5505

Moxa Europe:

Tel:

+49-89-3 70 03 99-0

Fax:

+49-89-3 70 03 99-99

Moxa Asia-Pacific:

Tel:

+886-2-8919-1230

Fax:

+886-2-8919-1231

Moxa India:

Tel:

+91-80-4172-9088

Fax:

+91-80-4132-1045



- 2 -

Overview

Moxa’s PTC-101 industrial media converters are specially designed for

reliable and stable operation in harsh industrial environments, and

provide industrial grade media conversion between 10/100BaseT(X) and

100BaseFX. The PTC-101’s reliable industrial design is excellent for

keeping your industrial automation applications running continuously,

and comes with a relay output warning alarm to help prevent damage to

your equipment.

This product has a wide -40 to 85°C operating temperature range, and is

designed to withstand a high degree of vibration and shock. The rugged

hardware design makes the PTC-101 perfect for ensuring that your

Ethernet equipment can withstand critical industrial applications, such as

in hazardous locations, and complies with FCC, UL, and CE standards.

Package Checklist

The PTC-101 is shipped with the following items. If any of these items is

missing or damaged, please contact your customer service

representative for assistance.

•Moxa Industrial Media Converter

•Quick installation guide (printed)

•Warranty card

Features

•Supports 10/100Base-TX auto-negotiation and auto-MDI/MDI-X

•Multi-mode and single mode with SC, ST, or LC fiber connectors

available

•Supports Link Fault Pass-Through

•Power failure by relay output (LV model only)

•Redundant dual VDC power inputs

•-40 to 85°C operating temperature range

•Integrated high-reliability power supply eliminates the need for

external power transformer

- 3 -

Panel Layout of the PTC-101 Series

1. Grounding screw

2. Terminal block for

power input

Heat dissipation vents

and relay output

4. DIP switch

5. Power input PWR LED

6. Fiber Link/Active LED

7. 100BaseFX Port

(ST/SC/LC

connector)

8. 10/100BaseT(X)

9. TP port 10 Mbps LED

10.

TP port 100 Mbps LED

11.

Model Name

12.

DIN-Rail mounting kit

- 4 -

Dimensions (for the PTC-101-S-SC; other models

available by request)

Wiring Requirements

ATTENTION

Safety First!

Be sure to disconnect the power cord before installing and/or

wiring your Moxa Industrial Media Converter.

- 5 -

ATTENTION

Safety First!

Calculate the maximum possible current in each power wire and

common wire. Observe all

electrical codes dictating the

maximum current allowable for each wire size. If the current goes

above the maximum ratings, the wiring could overheat, causing

serious damage to your equipment.

You should also pay attention to the following:

•Use separate paths to route wiring for power and devices. If power

wiring and device wiring paths must cross, make sure the wires are

perpendicular at the intersection point.

NOTE: Do not run signal or communications wiring and power wiring

in the same wire conduit. To avoid interference, wires with different

signal characteristics should be routed separately.

•You can use the type of signal transmitted through a wire to

determine which wires should be kept separate. The rule of thumb is

that wiring that shares similar electrical characteristics can be

bundled together.

•Keep input wiring and output wiring separated.

•We strongly advise labeling wiring to all devices in the system.

Grounding the Moxa Industrial Media Converter

Grounding and wire routing help limit the effects of noise due to

electromagnetic interference (EMI). Run the ground connection from the

ground screw to the grounding surface prior to connecting devices.

ATTENTION

This product is intended to be mounted to a well

-grounded

mounting surface such as a metal panel.

Wiring the AC/DC Power Inputs for the

PTC-101-HV series

STEP 1:

Insert the negative/positive AC/DC wires into

the V

-/V+ terminals.

STEP 2:

To keep the AC/DC wires from pulling loose, use

a small flat

-blade screwdriver to tighten the wire-

clamp

screws on the front of the terminal block connector.

STEP 3:

Insert the plastic terminal block connector

prongs into the terminal block receptor, which is located

on the PTC-101-HV’s top panel.

- 6 -

Wiring the Redundant Power Inputs for the

PTC-101-LV series

The top five contacts of the 8-contact terminal block connector on the

PTC-101-LV’s top panel are used for the PTC-101-LV’s two DC inputs. Top

and front views of one of the terminal block connectors are shown here.

STEP 1: Insert the negative/positive DC wires

into the

V-/V+ terminals.

STEP 2:

To keep the DC wires from pulling

loose, use a small flat

-blade screwdriver to

tighten the wire

-clamp screws on the front of

the terminal block connector.

STEP 3:

Insert the plastic terminal block

connector prongs into the terminal block

receptor, which is

located on the PTC-101-LV’

top panel.

ATTENTION

Before connecting

the PTC-101-

LV to the DC power inputs, make

sure the DC power source voltage is stable.

Communication Connections

PTC-101 models have one 10/100BaseT(X) Ethernet port, and one

100BaseFX (SC, ST, or LC type connector) fiber port.

10/100BaseT(X) Ethernet Port Connection

The 10/100BaseT(X) ports located on the PTC-101’s front panel are used

to connect to Ethernet-enabled devices.

Below we show pinouts for both MDI (NIC-type) ports and MDI-X

(HUB/Switch-type) ports, and also show cable wiring diagrams for

straight-through and cross-over Ethernet cables.

10/100Base T(x) RJ45 Pinouts

MDI Port Pinouts

MDI-X Port Pinouts

8-pin RJ45

Signal

Tx+

Tx-

Rx+

Rx-

Signal

Rx+

Rx-

Tx+

Tx-

- 7 -

RJ45 (8-pin) to RJ45 (8-pin) Straight-Through Cable Wiring

RJ45 (8-pin) to RJ45 (8-pin) Cross-Over Cable Wiring

100BaseFX Ethernet Port Connection

The concept behind the SC port and cable is quite straightforward.

Suppose you are connecting devices I and II. Contrary to electrical signals,

optical signals do not require a circuit in order to transmit data.

Consequently, one of the optical lines is used to transmit data from device

I to device II, and the other optical line is used transmit data from device

II to device I, for full-duplex transmission.

All you need to remember is to connect the Tx (transmit) port of device I

to the Rx (receive) port of device II, and the Rx (receive) port of device I

to the Tx (transmit) port of device II. If you are making your own cable,

we suggest labeling the two sides of the same line with the same letter

(A-to-A and B-to-B, as shown below, or A1-to-A2 and B1-to-B2).

SC-Port Pinouts

SC-Port to SC-Port Cable Wiring

ST-Port Pinouts

ST-Port to ST-Port Cable Wiring

- 8 -

Redundant Power Inputs

For the PTC-101-LV series, both power inputs can be connected

simultaneously to live DC power sources. If one power source fails, the

other live source acts as a backup, and automatically supplies all of the

Moxa Industrial Media Converter’s power needs.

DIP Switch Setting

DIP No.

Function

OFF

Auto Negotiation

Enable

Disable

“ON”:

Enables the “Auto Negotiation” function. The speed and duplex

states for each port link segment are automatically configured

using the highest performance interoperation mode.

“OFF”:

Disables the

“Auto Negotiation” function. The speed and duplex

states depend on the manual setting configuration.

Force TP Speed

100Mbps

10Mbps

(Only when Auto Negotiation is disabled)

“ON”:

Forces the Ethernet port to use 100 Mbps transmission.

“OFF”:

Forces the Ethernet port to use 10 Mbps transmission.

Force TP Duplex

Full Duplex

Half Duplex

(Only when Auto Negotiation is disabled)

“ON”:

Forces the Ethernet port to use Full Duplex.

“OFF”:

Forces the Ethernet port to use Half Duplex.

Link Fault Pass Through

Enable

Disable

“ON”:

Enables “Link Fault Pass Through.” The link status on the TX port

will inform the FX port of the same device and vice versa.

“OFF”:

Disables “Link Fault Pass Through.” The link status on the TX port

will not inform the FX port.

Operating Mode

Store-and-Forward

Pass Through

“ON”:

Selects “Store-and-Forward” mode. Begins to forward packets to

a destination port after an entire packet is received. The latency

depends on the packet length.

“OFF”:

Selects “Pass Through” mode. Operates with the minimum

latency. Both transceivers are interconnected via internal MIIs

and the internal switch engine and data buffer are not used.

Note:

With “Pass Through” mode enabled, the Ethernet port and fiber

port should transmit at 100 Mb

ps, which is equivalent to full

duplex mode.

The default setting for all DIP switches is in the ON position.

ATTENTION

After changing the DIP switch setting, you will need to power off

and then power on the PTC-101 to activate the new setting.

- 9 -

LED Indicators

The front panel of the Moxa Industrial Media Converter contains several

LED indicators. The function of each LED is described in the table below.

LED

Color

State

Description

PWR1 Green

Power is being supplied to power input

PWR1

Off Power is

not

being supplied to power input

PWR1

PWR2 Green

Power is being supplied to power input

PWR2

Off

Power is not being supplied to power input

PWR2

Fiber/

Link/

Act

Green

Fiber port is active

Blinking

Data is being transmitted or received.

Off

Fiber is inactive

10M Yellow

Ethernet port 100 Mbps link is active

Blinking

Data is being transmitted at 10 Mbps

Off

Ethernet port 10 Mbps link is inactive

100M Green

Ethernet port 100 Mbps is active

Blinking

Data is being transmitted at 100 Mbps

Off

Ethernet port 100 Mbps link is inactive

Specifications

Technology

Standards

IEEE 802.3 for 10BaseT

IEEE 802.3u for 100BaseT(X), 100BaseFX

Interface

RJ45 ports

10/100BaseT(X)

Fiber ports

100BaseFX (SC/ST/LC connectors)

LED Indicators

PTC-101-HV series: PWR1, Fiber Link, 10/100M

(TP port)

PTC-101-LV series: PWR1, PWR2, Fiber Link,

10/100M (TP port)

Dip Switches:

Dip No.

Function

OFF

Auto Negotiation

Enable

Disable

Force TP Speed

100 Mbps

10 Mbps

Force TP Duplex

Full Duplex

Half Duplex

Link Fault Pass Throuth

Enable

Disable

Operating Mode

Store-and-Forward

Pass Through

The default setting for all DIP switches is in the ON position.

Alarm Contact

One relay output with current carrying capacity of

1 A @ 24 VDC

- 10 -

Optical Fiber:

100BaseFX

Multi-mode

Single-mode

Wavelength

1300 nm

1310 nm

Max. TX

-10 dBm

0 dBm

Min. TX

-20 dBm

-5 dBm

RX Sensitivity

-32 dBm

-34 dBm

Link Budget

12 dB

29 dB

Typical Distance

5 kma

4 km

40 kmc

Saturation

-6 dBm

-3 dBm

a. 50/125 μm, 800 MHz*km fiber optic cable

b. 62.5/125 μm, 500 MHz*km fiber optic cable

c. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable

Power Requirements

Input Voltage:

Power Supply Type

Power Consumption

Fuse Rating

LV-DC

20 VDC to 72 VDC

170 mA @ 20 VDC

3.15A(T) 2

HV-AC

85 VAC to 264 VAC

73 mA @ 85 VAC

3.15A(T) 2

HV-DC

88 VDC to 300 VDC

47 mA @ 88 VDC

3.15A(T) 2

Connection

Removable Terminal Block

Overload Current

Protection

1.6 A (protects against two signals shorted

together)

Reverse Polarity

Protection

Present

Physical Characteristics

Housing

Aluminum, IP30 protection

Dimensions

(W x H x D)

122.5 x 90 x 20 mm (4.82 x 3.54 x 0.79 inch)

Weight

Product only: 690 g

Packaged: 875 g

Environmental Limits

Operating

Temperature

-40 to 85°C (-40 to 185°F)

Storage Temperature

-40 to 85°C (-40 to 185°F)

Operating Humidity

5 to 90%

Regulatory Approvals

Safety

UL 60950-1

EMI

FCC Part 15, CISPR (EN55032) class A

EMS

EN61000-4-2 Edition 1.2: 2001-04 (Level 4)

EN61000-4-3: 1995+A1: 2001

IEC 61000-4-3: 2002+A1: 2002 (Level 3)

EN61000-4-4: 2004 (Level 4)

EN61000-4-5: 2001-04 (Level 3)

EN61000-4-6: 2004-11 (Level 3)

EN61000-4-8: 2001-03 (Level 5)

EN61000-4-11: 2004-03 (Criteria B)

Power Automation

IEC 61850-3, IEEE 1613

Rail Traffic

EN50155/EN50121-4

Warranty

Warranty Period

5 years

Details

See www.moxa.com/warranty

Autres manuels pour PTC-101 Series

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Moxa Technologies Convertisseur de média

Moxa Technologies

Moxa Technologies MIINEPORT E1 Manuel utilisateur

Moxa Technologies

Moxa Technologies ICF-1150 series Manuel utilisateur

Moxa Technologies

Moxa Technologies VPort 461 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies NPort 5000 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies IMC-101 Series Manuel

Moxa Technologies

Moxa Technologies IMC-101 Series Manuel

Moxa Technologies

Moxa Technologies NPort 5100A Series Manuel utilisateur

Moxa Technologies

Moxa Technologies UPORT 1200 series Manuel utilisateur

Moxa Technologies

Moxa Technologies TCF-142-RM Series Manuel

Moxa Technologies

Moxa Technologies UPORT 1110 Manuel utilisateur

Moxa Technologies

Moxa Technologies VPort 364 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies Transio TCC-80I Manuel utilisateur

Moxa Technologies

Moxa Technologies TCF-142-S Manuel utilisateur

Moxa Technologies

Moxa Technologies IMC-21GA Manuel

Moxa Technologies

Moxa Technologies VPort 25 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies TCC-120 Manuel

Moxa Technologies

Moxa Technologies VPort 364 Series Manuel utilisateur

Moxa Technologies

Moxa Technologies UPORT 1110 Manuel utilisateur

Moxa Technologies

Moxa Technologies IMC-21GA-T Manuel

Moxa Technologies

Moxa Technologies UPort 1250I Manuel utilisateur

Moxa Technologies

Moxa Technologies TCF-142-S Manuel utilisateur

Moxa Technologies

Moxa Technologies CSM-200-1213 Manuel utilisateur

Moxa Technologies

Moxa Technologies Transio TCC-82 Manuel utilisateur

Moxa Technologies

Moxa Technologies TCF-142 Series Manuel utilisateur

Manuels Convertisseur de média populaires d'autres marques

SoundTraxx

SoundTraxx Blunami BLU-2200 Manuel utilisateur

SPROLINK

SPROLINK VA1 Manuel utilisateur

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manuel utilisateur

Nikon

Nikon AF-S TC-20E III Manuel utilisateur

Axis

Axis AXIS Q7406 Manuel utilisateur

Omega

Omega TAC80B-J Manuel utilisateur

Zoom

Zoom Thunderbolt TAC-2R Manuel utilisateur

OST

OST iConverter 10/100M Manuel utilisateur

Vertiv

Vertiv Netsure Manuel utilisateur

birddog

birddog MINI Manuel utilisateur

Roland

Roland GI-10 Manuel utilisateur

Wallenstein

Wallenstein WX310 Manuel utilisateur

Pace

Pace MSS 200-1 Manuel utilisateur

Solar Converters

Solar Converters EQ 12/24-50 Manuel utilisateur

CYP

CYP EL-7400V Manuel utilisateur

TIE

TIE MIDI 1i1o Manuel utilisateur

DCS

DCS Vivaldi Upsampler Manuel utilisateur

Westermo

Westermo MCW-211 SERIES Manuel utilisateur