Movon MF120 Manuel utilisateur
1
Contents
1. Safety and General Information
2. Introduction
3. Package Contents
4. MF120 Bluetooth Headset Features
5. Preparation
1) Charge the battery
2) Choose light or left ear wearing the MF120
6. Operations
1) Power on/off
2) Pairing the headset
3) Making a call
4) Receiving/answering a call
5) Reject/Cancel a call
6) Transferring a call
7) Adjusting speaker volume & mute
8) Mute function
7. Audio & LED Indicators
8. MF120 Specifications
9. Warranty
2
Safety and General Information
1. Please read this guidebook carefully and follow the instruction
2. To avoid any damage or malfunction of the unit, do not drop the unit from high places
3. Keep away unit from humidity, water and any other liquid. And if the unit is exposed by water,
moisture and other liquid directly then don’t operate it normally to avoid any electrical shock,
explosion and damage of the unit.
4. Do not place or keep the unit near the heat sources such as direct sun light, radiators, stoves
or other apparatus which produce heat. It may cause explosion, degrade of performance and
reduce battery life.
5. Do not modify, repair & disassemble unit at discretion (Especially, in case of battery: It may
cause an explosion)
6. Do not place the heavy objects on the unit.
7. Use only supplied and approved charger.
8. Replacement or service must be done at the qualified service center or returned to the
manufacturer.
9. Unplug this unit when unused for a long period of time or during lightening storms.
CAUTIONS: ELECTRIC SHOCK HAZARD
The battery used in this device may present a risk of fire or chemical burn if mis-treated.
3
Safety and General Information
FCC STATEMENT
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must accept
any interference received , including interference that may cause undesired operation.
Note: The manufacturer is not responsible for ANY interference, for example RADIO or TV
interference, caused by unauthorized modifications to this equipment. Such modifications could
void the user’s authority to operate the equipment.
EU
This product is CE marked according to the provision of the R&TTE Directive (99/5/EC). Here by
,MOVON Corporation, declares that this product is in compliance with the essential
requirements and other relevant provisions of Directive 1999/5/EC. For further information
please visit www.movon.co.kr
Please note that this product uses radio frequency bands not harmonized within EU. Within the
EU this product is intended to be used in Austria, Belgium, Denmark, Finland, France,
Germany, Greece, Ireland, Italy, Luxembourg, The Netherlands, Portugal, Spain, Sweden,
United Kingdom and within EFTA in Iceland, Norway and Switzerland.
Bluetooth is a trademark owned by the Bluetooth SIG, Inc.
4
Introduction
Bluetooth is a cutting-edge open specification that enables short range wireless connections
between other electronics devices such as Mobile Phone, PC, Headset, Handsfree Carkit and
so on. with in 10 meters range. And it uses globally available radio frequency band(2.4GHz) for
worldwide compatibility.
»1. Easy and Comfortable to Wear
»- Easy to wear with round type “ergonomic ear hook”
»- Wearable for either ear
»2. Light & Modern Style
»- Capsule type slim design
»- Light weigh only 14g
»- Various colors fit for your taste
»- Applied worldwide design patent
»3. Remarkable Technology
»- Compatible with Version 1.1 and 1.2
»- Talk time: 10 hours
»- Standby Time: 280 hours
»- Supporting Hands-free, Headset profiles
For more information about Bluetooth, please visit www.movon.co.kr / www.bluetooth.org /
www.bluetooth.com
5
Package Contents
Your MOVON MF120 Bluetooth headset includes a Bluetooth wireless headset and charging
solution.
Enclosed in this package you will find :
① One MF120 Bluetooth headset (Headset includes one medium sized ear-rubber)
② One A/C power adapter
③ Two spare ear-rubbers (small, large size)
④ One MF120 User Manual
①② ③ ④
6
MOVON MF120 Bluetooth Headset Features
① Headset Indicator Light (Blue/Red LED) : provides visual indication about headset status
② Multi-function Button : controls various functions of the headset
③ Volume Control & Mute Buttons : adjusts the speaker volume +/- and Mute function
④ Speaker : for incoming audio
⑤ Microphone : Noise cancellation mircophone
⑥ Ear-rubber : fits all for either ear
⑦ Ear-Hook : attaches headset to ear for comfortable wearing
⑧ Charging Port : contacts for charging the battery
⑨ Strap Hole : attaches headset and strap for free carrying
①
②
⑨
③
④
⑤⑥
⑦
⑧
7
Preparation
1. Charge the battery
The headset(MF120) is rechargeable and may not be fully charged when you buy it.
Before using the device for the first time, you need to charge it approximately for 2 hours
with the AC power adaptor.
* RED flashlight : Charging status.
* No flashlight : Charging completed.
2. Low Battery Warning
- Alarm melody every 1 minutes.
- Change to Red indicator light.
Once the low battery indicator starts warning, you have about 30 minutes of talk-time left.
3. Wearing
The Ear-Hook enables to wear on either ear. Please choose proper size of ear rubber of
headset to fit with your ears.
Picture of Wearing Motion
8
Operations l
1. Power on / off
Press and hold the Multi-function Button for at least 5 seconds until the BLUE/RED
indicator light flashes with turn-on/off melody through the headset speaker.
2. Pairing the headset
1) Ensure your headset is turned ON
2) Press and hold the Volume-Up and Volume-down Button for 5 seconds and then
you can see both BLUE and RED indicator light starts blinking next in 3 seconds.
Then the headset is ready for pairing.
3) Ensure your headset is within 10m(30feet) from the phone for access range.
4) Perform a device discovery from the phone. (For details on device discovery, please
refer to the user’s guide for the phone.)
5) Enter MF120 Pin Number “0000”on the phone
* Multi-Pairing
The headset can be paired with up to eight different Bluetooth devices. All paired devices
can connect to the headset, one at a time.
* Auto connection
The headset will be connected with cell-phone automatically without repairing when you
turn it on again
9
Operation ll
3. Making a call
1) Using Voice Dialing
- Press the Multi-function button shortly when the headset is on. Then you hear one beep
- Say the voice tag name
- You hear connecting melody when connection is made
2) Dialing a Number from the Phone
- Press the Volume up and down button shortly at once
- Using the phone’s keypad, dial the phone number
- Press the phone’s SEND/CALL key, or Press the Volume up and down button shortly
at once
(refer to user’s guide for the phone)
- The call will transfer automatically to the headset with connecting melody when
connection is made
3) Last number dialing
- Press the Volume up and down button shortly at once
- You hear connecting melody when connection is made
10
Operation lll
4. Receiving/answering a call
When you receive an incoming call with the headset on and paired, a ring tone is generated
in your headset. Answer the call by pressing the Multi-function button briefly.
*3-Way Calling
-Releases all held calls: Press and hold the Volume-Down and Multi-function button for
2 seconds.
-Accept waiting call and Release active call: Press and hold the Volume-Down button for
5 seconds.
-Accept waiting call and Hold active call: Press and hold the Volume-Up button for
5 seconds.
-Adds a held call to the conversation: Press and hold the Volume-Up button for 2 seconds.
-Connects the two calls and disconnects the subscriber from both calls: Press and hold
the Volume-Up and Volume-Down Button for 2 seconds.
5. Reject/Cancel a call
1) Reject a call: Press and hold the Multi-function button for two seconds when you receive
an incoming call
2) Cancel a call : Press the Multi-function button shortly while making a call
Table des matières
Autres manuels Movon casque
