MOVISUN DOKKI Manuel utilisateur
User Manual
MOVISUN
FCC ID:2ANLVDOKKI
Model Name:DOKKI
1.appearance :
1.1 Touch panel
7” Capacitive touch panel: In The Operation, to click, drag on the touch panel.
1.2 POWER
Start up: Long Press and hold the power button, the system will enter the main interface.
shut down: In the main menu interface, Press the power button about 5 seconds to shut down. The system will
hint "power off" option, Click ”ok”. You can safely shut it down.
Lock screen: Short press power button to lock screen or unlock screen.
【Remark】
a. When power is used, system will shut down automatically.
b. Illegally turn off the device, restart will scan and restore the disk. It may take longer time to enter into system or
cause system crash.
1.3 DC port
Charging through DC charger.
1.4 Micro USB
Micro USB jack: Charging through USB charger or you can use it to connect the computer for data transmission
and external connection USB flash drive through OTG cable.
1.5 MIC
Record microphone.
1.6 earphone jack
3.5 mm standard earphone jack.
1.7 Volume +, Volume-
The buttons Volume +, Volume- achieve changes in the volume.
1.8 TF card
TF-CARD slot: external T-FLASH card
1.9 Camera
There are front camera and rear camera to take photos.
2. First use
2.1 Battery management and charge
Before first use, please make sure the device is fully charged. If not, just need to connect the USB adaptor or
connect to Computer by USB cable, then you can charge.
The first two times please keep charging about 6 hours, after that you just need to charge 4 hours.
【Remark】: This tablet using Built-in polymer battery, Charge must choose.
standard adaptor (Input: AC110~240V 50/60Hz Max:180MA.. Output: DC5.0~5.5V/1.5-2A)
During the charging, the battery icon will scroll or have flashing indicate in battery icon.
When finish charging, battery icon will become green and stop rolling.
In order to prolong the service life of the machine, you are advised to use up the battery power to about 15%
before charging it.
【Remarks】:
a. If you don’t to use this Tablet for long time, in order to avoid no power damage, please charge/play the device
once a month.
b. After shut down for low battery, connect USB adaptor, device will remind low battery, need to wait some time
until the battery is enough power to enter into main menu.
c. Device charging should be in standby status for normal charging time.
Because with device and screen power consumption, it may cause longer charging time.
2.2 Connection with PC
Use USB cable to connect device to PC. The unit is a “generic USB Device” and does not need any extra
software drivers to connect to your PC. After your PC has recognized the unit, you will see a message on the
bottom of your PC screen informing you. (If your PC warns: Drivers not installed, ignore this)
To complete the connection, you need to reveal the Notifications Screen on the unit. You will see the notification
menu similar to this:
Select USB connected.
You will then see this screen:
Select Turn on USB storage.
In the load mode, you can copy, delete the file on the device and the file on the memory card.
3. Equipment operation interface
3.1 Main interface After start-up, it will enter the home screen.
In home screen, you can manage the software ICONS: long press the
ICONS 3 seconds, after the icons will be bigger, then you can drag
anywhere in the interface.
Delete ICONS: long press the ICON for 3 seconds, drag the icons to the mark “X”, after that you can delete icon.
In the home screen, when you press “ ”, it will go to main interface.
In the main interface, you can touch the icon to open the APPs
3.2 status bar
The status bar above of the screen
Top right corner display : battery charge icons, current time.
Bottom display: ESC button, Menu, Recent applications, Screenshot, Volume -, Volume +.
4. Equipment basic setting
Setting: Click setting icons , enter setting interface
4.1 Wi-Fi
Drag “OFF” to “On”, it will show the available Wi-Fi signal.Choose yours, then connect it by entering password.
You can browse website then.
4.2 3G setting
There are various ways to use your tablet while outside of a WIFI hotspot.
Using a 3G USB Dongle:
• The Software drivers for 3G dongles are supplied by Google for the Android operating system, which is
installed in your unit.
The compatible 3G dongles currently are outlined here:
3G WCDMA: HUAWEI: E160E / E1750 / E230 / E1782 / E182G / E176G / UMG1691,ZTE: MF637U / MF633 /
MF633BP-1
3G CDMA2000/EVDO: HUAWEI : E150 / EC1261 / EC122 / EC156 / EC1270
ZTE: AC580 / AC2736 / AC2746
Before you purchase a 3G dongle, please double check with the Telco store
that it is compatible with one of the above models and that they have NOT
ALTERED THE INTERNAL FIRMWARE OF THE DONGLE.
Then, follow the instructions below on how to install it:
Connect 3G dongle to device by OTG cable, wait about 3-10 seconds. Then 3G dongle will be recognized by the
device. 3G network will be connected automatically.
Using your Smart Phone instead of a 3G Dongle
Another choice you have is to set up your Smart Phone as a portable WIFI router. This works in the same way as
3G dongles, however, you do not need to connect it to the USB port of the tablet. This way, there are no software
drivers compatibility issues.
Essentially, this method is like having a portable WIFI router in your pocket (your smart phone) and
works like this: “3G in—Wi-Fi out”. Just setup your Smart Phone to be a WIFI Hot Spot and then “tune” the tablet
to it using the normal Wi-Fi feature.
Please consult your Smart Phone manual, however, here is a snapshot of how its done:
IPHONE
SETTINGS
PERSONAL HOTSPOT—TURN IT ON
NOTE THE PASSWORD SHOWN ON THE PHONE
ANDROID SMART PHONE (HTC / SAMSUNG ETC)
SETTINGS
WIRELESS and NETWORKS
MOBILE ACCESS POINT SETTINGS
ACTIVATE
4.3 Sound: Volume, Default notification sound, Touch sounds, Screen lock sound.
4.4 Display: Brightness, wallpaper, auto-rotate screen, sleep, Daydream, front size, Cast screen ,
Sensors ,HDMI , output screen resize.
4.5 Storage
Remove TF card, view the available storage space.
【Remark】: please touch option ” Unmount Removable SD card”, so that you can remove SD card safely.
4.6 Application Management
How to Install Android Applications:
Purchased or free Android applications that you have downloaded to your computer can be installed
quickly & easily on the unit by using the File Manager application.
a. Copy the .apk files that you want to install onto a SD card or USB device, then
insert or connect it to your Device.
Tap the File Manager application icon to reveal this screen:
b. Tap or and locate the folder in which the .apk application files were saved.
Table des matières
