Movincool PC7 Manuel utilisateur
SECCIÓN EN ESPAÑOL
SECTION EN FRANÇAIS
AVAILABLE AT WWW.MOVINCOOL.COM
Congratulations on purchasing the MovinCool portable air conditioner.
This manual explains how to install and operate the MovinCool PC 7
portable air conditioning unit. Please read this operation manual
thoroughly to familiarize yourself with the features of the unit
and to ensure years of reliable operation. You may also find it
useful to keep this operation manual on hand for reference.
Foreword
Attention:
(1) This unit is not intended for use by young children without supervision.
(2) The plug shall be accessible after installing the unit.
(3) The unit shall be installed in accordance with national wiring regulation.
(4) If the power cord is damaged, it must be replaced by the manufacturer or
a qualified technician.Contact your reseller for more information.
(5) Please wait 3 minutes before restarting the unit.
(6) Do not sit or stand on the unit.
(7) The proper electrical outlet for MovinCool unit must be equipped with a UL
approved ground fault breaker to prevent electrical shock from the unit.
(8) The minimum clearance from the unit to combustible surface: 3 feet (1.0 m)
(9) The AC outlet (115VAC, Single Phase, 60Hz) must be rated at 15A or higher.
WARNING This symbol refers to a hazard or unsafe practice which can result
in severe personal injury or death.
This symbol refers to a hazard or unsafe practice which can result
in personal injury or product or property damage.
CAUTION
Contents
Introduction 5
Unit description and function 6
Operation and indicators or remote control 8
Use of control panel 10
Water drainage methods 11
Maintenance/service 12
Safety cautions 13
Troubleshooting 14
Installation 15
LCDI Power Cord 20
Warranty 21
INTRODUCTION
Mobile Air Conditioner
Other air conditioning solutions are recommended when the ambient temperature is either
below 63 °F (17°C) or above 88° F (31°C).
Note: When the ambient temperature is high, condensation may occur to the unit.
ATTENTION
There might be some water remained in the bottom of the condensate pan, push the PC7
gently and carefully to prevent water splashing out. Empty the water when moving the unit.
CAUTION
Before you use your PC7 air conditioner, please read this operation manual carefully so
that you get the best from the unit.
This operation manual is used for guidance and does not form part of a contract. We reserve
the right to make technical changes without prior notice.
The PC7 is a small unit, which can adjust the temperature and humidity in a room
making it easy to use in different occasions.
It also has multiple functions, included Cooling, Dehumidifying, and Fan Modes.
This unit was designed especially to be used in a family house, office, etc. It has a compact
design compared to others with the same coolig capacity. Power consumption is low and the
noise is especially low.
UNIT DESCRIPTION AND FUNCTION
FRONT
Air outlet
Left/right air direction
control tab
Caster
Up/down air louver
Handle
Note: Open the up/down air louver to the highest position before the unit is turned on.
Control panel
Left/right air swinging fins
BACK
Air-return grill
Power cord holders
Base stopper
Air inlet
Exhaust air outlet
UNIT DESCRIPTION AND FUNCTION (cont.)
TIMER Button
Press this button to set the
time for switch-on, switch-off
timer or to delete the timer.
FAN SPEED Button
Press this button to
choose high, medium or
low speed of air delivery.
TEMP Button
Press these buttons to
change the set point
temperature.
MODE Button
Press this button to select
the modes of cooling,
dry or fan mode.
SWING Button
Press this button to
activate/deactivate
auto-swing feature.
POWER
Indication lamp
WATER FULL
indication lamp
ON/OFF Button
Press this button to turn
the unit ON or OFF.
Fan speed indicator
Operation mode
indicator Swinging indicator
Display of preset temperature and failure code
when SET is displayed, the displayed digits indicate
the preset temperature.
When FAULT is displayed, the displayed digits
indicate the code of failures.
Display of time setting
The displayed digits indicate
the remaining time of
on/off operation.
DISPLAY SCREEN
CONTROL PANEL
OPERATON AND INDICATORS OF REMOTE CONTROL
Remote Control
Install the supplied batteries (type AAA 1.5V) to the remote controller.
This button is used to select the cooling,
drying,fanning mode of operation.
This button is used to set the switch-on or
switch-off time. Use together with the “HOUR”
button, the time setting can be made within
the range of 00-23 hours, with the interval of
one hour.
Press this button to choose high, medium
or low-speed of air delivey.
Fan speed indicator
Lock key indicator
Air flow indicator
SWING button
Press this button to select the swinging or
fixed air delivery.
Press this button to lock or unlock the keyboard.
Temperature setting button
Each presing of the button, the
temperature setting is increased or
decreased by 1°F.
ON/OFF button
Press this button to turn the unit ON or OFF.
HOUR button
This button is used to set the timer time or the
present time.
MIN button
This button is used to set the present time.
HOLD button
Set temperature indicator
Cooling indicator
Drying indicator
Fan Mode indicator
Timer time or present time indicator
MODE button
TIMER button
FAN SPEED button
Not Used.
OPERATION AND INDICATORS OF REMOTE CONTROL (cont.)
Present Time Setting Procedure
When batteries are inserted,time is automatically set to 00:00. Set the present time as
follows.
Example:Set time to 10:30
Continuously press the HOUR button for
2 seconds .
The time indicator is blinking and can set the HOUR time.
Press the HOUR button. (Set to 10 :)
The time indicator is blinking and can set the MIN time.
If the remote control is at abnormal state, take out the batteries under the back cover
to clear off the display.
NOTE : The timer is set based on the present time.So set the present time correctly.
Continuously press the MIN button for 2
seconds .
Press the MIN button. (Set to 30)
Press the ON/OFF button to confirm the set time
or it automatically exits the time setting state after
15 seconds.
The operating ranges for cooling operation and dehumidifying are 63ºF-88ºF(17ºC-31ºC).
Dehumidifying and Cooling Operation
Power Source
WARNING
The AC outlet (115 VAC,Single Phase,60Hz) must be rated at 15A or higher.
The AC socket must be firm and reliable.
Do not connect the unit to a multiple socket outlet which is also being used for other
electrical appliances.
Insert the AC power plug securely into the AC socket before using the unit, when it beeps
after 2 seconds, press ON/OFF button, the unit begins to operate.
Cooling Operation
1.Repeatedly press MODE button to choose the cooling mode, LCD window shows"COOL".
2.Repeatedly press TEMP+or TEMP-button to set a proper room temperature at 63ºF-88ºF
(17ºC-31ºC).
3. Press FAN SPEED button to choose a proper fan speed: high, medium, low speed.
4. Press SWING button to adjust the air delivery direction, the LCD window shows"
Note:
In order to improve the cooling efficiency of the unit:
a) Do not place the unit in direct sunlight.
b) Do not place the unit in near other heat source.
c) The set temperature can be set at 63ºF(17ºC) or higher, however the unit operates
intermittently at less than 70ºF (21ºC).
Dehumidifying Operation
1. Keep the windows and the doors closed to effectively dehumidify the room.
2. Repeatedly press MODE button to choose the dehumidifying mode, the LCD window
shows "DRY", and fan speed can not be adjusted.
USE OF CONTROL PANEL
Autres manuels pour PC7
3
Table des matières
Autres manuels Movincool Climatiseur
Movincool
Movincool OFFICE PRO 12 Manuel utilisateur
Movincool
Movincool Office Pro 10 Manuel utilisateur
Movincool
Movincool Office Pro 24 Manuel utilisateur
Movincool
Movincool Office Pro 36 Manuel utilisateur
Movincool
Movincool OFFICE PRO 12 Manuel utilisateur
Movincool
Movincool Classic 40 Manuel utilisateur
Movincool
Movincool Classic 60 Manuel utilisateur
Movincool
Movincool 10SFU-1 Manuel utilisateur
Movincool
Movincool OFFICE PRO 12 Manuel utilisateur
Movincool
Movincool Classic Plus 14 Manuel utilisateur
Movincool
Movincool OFFICE PRO 12 Manuel utilisateur
Movincool
Movincool Office Pro 63 Manuel utilisateur
Movincool
Movincool Classic 10 Manuel utilisateur
Movincool
Movincool CM 12 Manuel utilisateur
Movincool
Movincool Climate Pro K36 Manuel utilisateur
Movincool
Movincool CMW30 Manuel utilisateur
Movincool
Movincool Classic Plus 14 Manuel utilisateur
Movincool
Movincool Classic 10 Manuel utilisateur
Movincool
Movincool PC7 Manuel d'utilisation et d'entretien
Movincool
Movincool Classic Plus 14 Manuel utilisateur
