Move Force+ 600N Instructions de montage
1000N Speed
INSTALLATION INSTRUCTIONS AND USER GUIDE
SECTIONAL AND TILTING DOOR OPENER
600N
1000N
1200N S/N
WARNING
Please read the manual carefully before installation and use.
The installation of your new door opener must be carried out by a technically qualied or licensed person.
Attempting to install or repair the door opener without suitable technical qualication may result in severe
personal injury, death and / or property damage.
EN
CONTENTS
Important Safety Recommendations
Product Description & Features
Pre-Installation Recommendations
Installation Instructions
Installation (Wall Bracket & Door Bracket)
Installation (Steel Track)
Installation (Sectional Steel Track Assembly)
Battery Backup Assembly (optional)
Display Menu Instructions (Plus II)
Display Menu Instructions
Terminal Introduction and Application
Manual Disengagement
Maintenance
Technical Specications
Parts Listing
Common Fault & Solutions
Warranty Certicate
1D
2-3D
4D
4D
5D
6D
7D
8D
9-19D
21-22D
23D
23D
24D
25D
26-27D
28D
IMPORTANT SAFETY RECOMMENDATIONS
FAILURE TO COMPLY WITH THE FOLLOWING SAFETY RECOMMENDATIONS MAY RESULT IN SERIOUS PERSONAL
INJURY, DEATH AND / OR PROPERTY DAMAGE.
1. PLEASE READ CAREFULLY AND ADHERE TO ALL SAFETY AND INSTALLATION RECOMMENDATIONS.
2. The opener is designed and manufactured to meet local regulations. The installer must be familiar with local
regulations required in respect of the installation of the opener.
3. Unqualied personnel or those persons who do not know the occupational health and safety standards being
applicable to automatic gates and other doors, must in no circumstances carry out installations or implement systems.
4. Persons who install or service the equipment without observing all the applicable safety standards will be responsible
for any damage, injury, cost, expense or claim whatsoever any person suered as a result of failure to install the system
correctly and in accordance with the relevant safety standards and installation manual whether directly or indirectly.
5. For additional safety we strongly recommend the inclusion of Photo Beam. Although the opener incorporates a
pressure sensitive Safety Obstruction Force system the addition of Photo Beam will greatly enhance the operating safety
of an automatic garage door and provide additional peace of mind.
6. Make sure that the garage door is fully open & stationary before driving in or out of the garage.
7. Make sure the garage door is fully closed & stationary before leaving.
8. Keep hands and loose clothing o the opener and garage door all the time.
9. The Safety Obstruction System is designed to work on STATIONARY objects only. Serious personal injury, death and /
or property damage may occur if the garage door comes into contact with a moving object
10. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental
capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning
use of the appliance by a person responsible for their safety. Children should be supervised to ensure that they do not
play with the appliance.
11. Waste electrical products should not be disposed of with household waste. Please recycle where facilities exist.
Check with your local authority or retailer for recycling advice.
12. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualied
persons in order to avoid a hazard.
-WARNING: Important safety instructions. It is important for the safety of persons to follow all instructions. Save these
instructions.
-Do not allow children to play with door controls. Keep remote controls away from children.
-Watch the moving door and keep people away until the door is completely opened or closed.
-Take care when operating the manual release since an open door may fall rapidly due to weak or broken springs, or
being out of balance.
-Frequently examine the installation, in particular check cables, springs and mountings for signs of wear, damage or
imbalance. Do not use if repair or adjustment is needed since a fault in the installation or an incorrectly balanced door
may cause injury.
-Each month check that the drive reverses when the door contacts a 50 mm high object placed on the oor. Adjust if
necessary and recheck since an incorrect adjustment may present a hazard, for drives incorporating an entrapment
protection system depending on contact with the bottom edge of the door.
-Details on how to use the manual release.
-Information concerning the adjustment of the door and drive.
-Disconnect the supply when cleaning or carrying out other maintenance.
-The installation instructions shall include details for the installation of the drive and its associated components.
-1D-
PRODUCT DESCRIPTION & FEATURES
1. Obstruction force adjustment
The minimum force display “1” and it can be adjusted upward. Display “5” means the maximum
force.
2. Travel speed adjustment
“8” appears on the display means the 80% of the travel speed. Display “A” means the full speed
160mm/s or 200mm/s.
3. Reversal height adjustment
“0” appears on the display means the door will rebound to the top. Display “1~9” means the door
will rebound to the position of the whole travel. One tenth to Nine tenth of the whole travel etc.
4. Partial open/height
“0” appears on the display means close the partial open function. Display“1~9” means to set the
dierent partial open position of the whole travel.
5.Transmitter button recognition function
“0”appears on the display means the buttons recognition function is closed. Display“1”means the
buttons recognition function is open.
6. Codes memory quantity
“A” appears on the display means the maximal code memory quantity is 50pcs. Press UP/DOWN
button once, to increase or decrease quantity. The code memory quantity is set on 5pcs*N, N=1~9.
(The quantity is the multiple of 5).
7.Maintenance alarm
“b”appears on the display and led light ashes 10 times quickly means the garage door and motor
need total maintenance.
8. Automatic safety reverse
Automatic stop / automatic reverse are controlled by our software of circuit boards. We are
circumspect to protect your children, pet or other goods.
9. Soft start / Soft stop
Ramping speed up and down at the start and end of each cycle reduces stress on the door and
opener for longer life, and makes for quieter operations.
10. Auto-Close
Auto- Close ensures peace of mind and keeps your house secure by automatically closing the door
upon entering or exiting the garage.
11. Self learning open and close obstruction force
The amount of opener power for dierent stages of the door’s travel is learnt during setup and is
constantly re-proled. Opener force measurement automatically adjustment in a suitable range.
12. Electronic limit, simple adjustment.
You only need control the limit setup from control panels to adjust it exactly, the simple and quick
process for any peoples.
-2D-
Moving Up
Moving Down
-3D-
13. Available terminal for Photo beams & Extra receivers & Wire or wireless wall switch &
Caution light & Pass door protection device.
14. Energy saving - L.E.D courtesy light
3 minutes L.E.D light delay, switching on with each cycle to illuminate your darkened garage.
15. Battery backup available
Openers could be supplied power with our battery backup once the power failure at your home.
16. Self-Lock in gear motors
Gear motor will self-lock with its disengagement systems.
17. Manual release
Don't worry about the power failure, the manual release system is a solution for operation the
door at any time.
18. Transmitter technology
Rolling Code technology (7.38 x 1019 Combinations), 433.92 MHz frequency, 4 channels design to
ensure you can control 4 dierent doors with one transmitter.
19. Applications
With as little as 30mm required between the ceiling and the highest point of the door travel, the
opener can be ush mounted for low headroom applications.
20. Metal bottom plate, stronger and security.
21. Up / Down moving operation buttons (UP / DOWN)
30mm Minimum
Clearence
PRE-INSTALLATION RECOMMENDATIONS
INSTALLATION INSTRUCTIONS
1. Garage door must be able to be lifted and closed easily by hand and without much eort. A well
balanced & sprung door is critical for proper installation.
2. The garage door opener can’t compensate for a badly installed garage door and should not be
used as a solution for a“hard to open” door.
3. If the unit is being installed on an existing door, make sure any existing locking devices are
removed or warranty will be void.
4. An approved outlet must be installed near where the opener is begin installed.
5. There should be a minimum gap of 30mm between the bottom of the chain drive rail and the top
of the garage door at its closest point. (refer to Fig 1.)
Important note: As for additional safety rules, we strongly recommends the tting of Photo Electric
safety beams on all installations.
Wall Bracket - Close the garage door and measure
the garage door width at the top and mark the
centre. Locate and mount the wall bracket
2cm-15cm above the door on the inside wall.
(Depend on the actual installation space).
Door Bracket – Fix the door bracket to a structural
part of the door as close to the top edge as possible
Figure 1
Mount Wall Bracket and Door Bracket (Fig2)
Figure 2
-4D-
Figure 3
Installation (Steel Track)
-5D-
Figure 4
Figure 5
STEP 1 (Fig.3)
Attach the opener head to the steel track. Assembly the 2 “U” Hanging brackets with 6mm nuts
supplied.
STEP 2 (Fig.3)
Place the steel track and opener head assembly centrally on the garage oor, with the open head
furthest away from the door. Lift the front of the track up to the wall bracket. Insert the pivot pin
and secure it with the split pin supplied.
STEP 3 (Fig.3, Fig.4)
Lift and support the opener head (with a ladder) so it is positioned centrally and level. Fix the
opener and track on ceiling by Iron bracket A & B.
WARNING: Do not allow children around the door, opener or supporting ladder serious injury
and/or damage may result from failure to follow this warning.
STEP 4 (Fig.3, Fig.5)
Connect the straight arm to the bent arm with the
bolt.
Position and bolt the arms to the top edge of the
door using
the bolt supplied.
STEP 5
Lift the garage door until the shuttle locks into the
drive chain/belt.
Now, ready to program the openers
1. 2-Parts Track:
As Fig.6, slide the A rail into the sleeve, slide the B rail into the sleeve.
3-Parts Track:
As Fig.7, slide the C rail into the sleeve, slide the D rail into the sleeve; slide the E rail into the sleeve.
2. Cut the plastic thread; pull the screw rod along with inner chain to the end rail position (Fig.8)
3. As Fig.9, release the nut & spring.
4. Tight the nut to the right position as
shown in Fig.10, cut the plastic tape, cut
the plastic thread on sprocket, then whole
rail assembled nished.
Sectional Steel Track Assembly
2 Parts Steel Track
-6D-
Figure 9
Figure 10
A:1500 mm
Sleeve
B:1500 mm
C:1000 mm
D:1000 mm
E:1000 mm
Sleeve
Sleeve
Figure 6
Figure 7
Figure 8
Option 1 - Top Fixed
STEP 1 (Fig.11)
Assemble the battery & battery bracket like the photo, x by screws supplied.
STEP 2 (Fig.12)
Join the battery to opener, nd the Fig.12.
Option 2 - Side Fixed
STEP 1 (Fig.13)
Assemble the battery & battery bracket like the photo, x by screws supplied.
STEP 2 (Fig.14)
Join the battery to opener, nd the Fig.14.
Battery backup Assembly (optional)
-7D-
Figure 11 Figure 12
Figure 13 Figure 14
DISPLAY MENU INSTRUCTIONS
FEATURES SETTINGS:
a) Press and hold SET button until “1” appears on the display
then release the button.
b) Press UP / DOWN button, then it displays the number“1-E”.
c) Press SET button to conrm the feature you need to set,
then it enters to the interface for detail setting of the
appointed feature.
d) In the detail setting interface display“0-A” with ash dot.
e) Press UP / DOWN button to choose the feature you need to
set.
f ) Press SET button to conrm the set and it will back to
standby status automatically and display “ll”.
-8D-
Ce manuel convient aux modèles suivants
3
Table des matières
Manuels ouvre-porte de garage populaires d'autres marques
Craftsman
Craftsman 139.53924 Manuel utilisateur
Chamberlain
Chamberlain MyQ 940ESTD Manuel utilisateur
Automatic Technology
Automatic Technology GDO-9V1 SecuraLift Manuel utilisateur
Westfalia
Westfalia 19 36 07 Manuel utilisateur
Chamberlain
Chamberlain HD520EVP Manuel utilisateur
Cardin
Cardin BL Series Manuel utilisateur