3
Safety Instructions
All and any safety instructions given in this document shall be strictly observed without
any exception!
This Operating Instruction comprises basic guidelines that shall be taken into account in
installing, operating and maintaining the counter-current unit. That is why the user, as well as
experts that might be invited to take part in professional installation of the unit, shall read this
document very carefully.
Any failure to observe the safety instructions may threat not only the health of involved persons,
but can present an environmental hazard and the risk of equipment damage.
The unit shall not be operated, if any of its protective covers is not in place.
The counter-current unit is intended only for swimming and massages. If used for any other
purpose or modified (no matter how) without manufacturer’s previous consent, any warranty
provided with the unit by its manufacturer and/or seller shall become void, as well as
manufacturer’s and/or seller’s liability for product safety.
Persons performing professional installation of the unit shall possess relevant professional
qualification in accordance with applicable electrical regulations (they shall be certified
according to Decree 50/1978 Coll., Article 6).
Persons, who are to operate, maintain and inspect the unit, shall be informed within the scope
of duties and responsibilities set out in this Operating Instruction. The equipment owner shall be
responsible for equipment operation and maintenance as well as for full compliance with
relevant safety instructions.
This equipment shall not be used by underage persons and persons with reduced physical,
sensual or mental capabilities, if not instructed and are not acting under supervision of other
responsible person. Persons not familiar with operation of the unit within the scope hereof and
persons, whose abilities are reduced by drugs, narcotics, etc., and people of slow response
shall not use the equipment!
Water level in the pool shall not be higher than 300 mm above the axis of the counter-
current nozzle (see Fig. 1).
The temperature of pool water shall not exceed 35 °C.
Safety Guidelines for Installation and Maintenance
The equipment may be subject to any handling, maintaining or assembling/disassembling works
only after has been disconnected from power mains!
Without any exception, the procedures prescribed for putting the equipment out of operation and
given in this Operating Instruction shall be strictly adhered to.
Immediately after works have been completed on the equipment, all its protective and safety
covers shall be installed back onto the counter-current unit body and secured against loosening.
In case the unit is to be started again, all the guidelines set out in the paragraph dealing with
equipment re-starting shall be taken into consideration.
Any modification of or change in equipment design may be made only after being agreed upon
with the manufacturer. Only genuine replacement parts authorised by the manufacturer may be
used for any maintenance and repair works. Any use of unauthorized spare parts shall result in
the loss of any warranty and refusal of claims for compensation.
Machine operational safety will be guaranteed only if all the terms and conditions set out in this
Operating Instruction have been complied with.
