Mountain Top Roll Manuel utilisateur
DOWNLOAD PDF
Mountain Top
® Roll
Owner’s manual, Ford Ranger Wildtrak
PRINT FORMAT: A5 BOOKLET
©2017 Mountain Top Industries APS ISSUE 06 / 27/09-2017 / MTI 886 023
January
February
March
April
May
June
July
August
September
October
November
December
6.4 6.3
6.1
6.3
6.1
6.26.4
6.3
6.1
6.3
6.1
General maintenance calendar
Contents Mountain Top® Roll - Ford Ranger Wildtrak, Owner’s manual
1. Conditions of use p. 2
2. Warnings p. 4
3. Functions p. 5
4. Release locking system p. 6
5. Spring adjustment p. 8
6. Maintenance
6.1 General cleaning p. 9
6.2 Cleaning the canister p. 10
6.3 Lubrication p. 11
6.4 Re-tightening the bolts p. 12
01/12
+80o
-30o
Conditions of use
1
The Mountain Top Roll cover is made of aluminium, plastics, and rubber.
To ensure a smooth and trouble free operation, it’s advised to follow this manual.
The Mountain Top Roll cover has been designed for normal driving conditions on roads;
the design is lightweight and not suitable for extreme usage.
Temperature range: -30 to +80 degrees Celsius.
The purpose of The Mountain Top Roll cover is to cover the bed from rain and dirt:
Designed to withstand rain water, some water ingress may occur. In the tailgate
area there will be water ingress.
The Mountain Top Roll is made of aluminium profiles which heats up and cools down
relatively quick according to weather conditions. This can cause condensation on the
underside of the lamellas and the panels.
02/12
Fig. 1 Fig. 2
Fig. 3 Fig. 4
The Roll cover is not designed for loading although it can support normal snow loads.
No part of it can support any load from cargo or persons and the product might be
damaged if somebody stands on it. (Fig. 1)
The Mountain Top Roll is NOT a 100% waterproof product, but off ers good protection
against the elements. It is weather resistant, meaning that some water leakage must be
expected.
The pull strap has been designed only for opening and closing the Roll cover. The
carabineer and ring will be damaged in case of excessive load.
Goods in the bed must be secured during transportation to prevent damage on the
structural parts of Roll cover (especially the canister). (Fig. 2)
If the Roll cover is closed and has water, snow, ice or dirt on the cover, it might enter into
the bed as the cover retracts. To avoid this, clean off the top surface of the cover prior to
opening. (Fig. 3)
When opening the cover, the opening should be careful and controlled using the pull
strap to prevent the cover from hitting the front with full speed, which it has NOT been
designed for. (Fig. 4)
03/12
Fig. 5 Fig. 6
Fig. 7 Fig. 8
2Warnings
Do not drive with persons under the Roll cover.
Do not allow persons or animals to stay in the bed when the cover is closed.
Temperatures can be very high under the cover when closed. (Fig. 5)
The pull strap should not be used to tie down cargo.
Do not disassemble the main shaft from the canister without relieving the spring
tension completely (See “Spring adjustment”). (Fig. 6)
Remove fi ngers from lamellas when opening and closing. (Fig. 7)
We do not recommend washing the Roll cover in a brushless carwash, as the
coating may be damaged due to use of chemicals. (Fig. 8)
Wash the Roll cover regularly using normal car shampoo and a soft, lint free cloth or
brush.
If washed in any carwash, or if any chemicals are used on the roll cover, please
ensure a max PH value of 8 is used, to avoid damage to the coating.
04/12
Fig. 9 Fig. 10
Fig. 11 Fig. 12
2
1
3Functions
To open The Mountain Top Roll cover:
Make sure the Roll cover is unlocked (Fig. 9+10)
Pull back on the handle, and press down on the lock cylinder. The lock is now dis
engaged, and can be moved. (Fig. 11)
Use the pull strap to gently open the Roll cover to any position, as long as the lock
is not engaged. (Fig. 12)
To move the cover forward to an open position requires use of the locking function,
although the cover can be moved rearwards to closing position without operating the
locking function.
Engage the lock again by either going to the fully open position, or by using the pull
strap to engage the lock. (Fig. 17)
05/12
Fig. 13 Fig. 14
Fig. 15 Fig. 16
4Release locking system
The Mountain Top Roll cover features a locking system with multiple locking points along
the profi les. The Roll cover will stop at the locking points only when the lock is engaged.
When the locking system is engaged, the Roll cover will lock in these 4 positions:
Fully open. (Fig. 13)
2/3 open. (Fig. 14)
1/3 open. (Fig. 15)
Fully closed. (Fig. 16)
To fully open the Roll cover, the locking system must be disengaged.
06/12
Fig. 17 Fig. 18
Fig. 19 Fig. 20
To toggle the locking system, pull the strap either left (engage) or right (disengage).
(Fig. 17+18)
When the Roll cover is fully opened, a lock activator is automatically triggered, engaging
the locking system. (Fig.19)
For the Roll cover to close correctly, the locking system must be engaged before the
cover is closed. (Fig. 20)
07/12
Fig. 21
Fig. 22 Fig. 23
5Spring adjustment
Before adjusting the spring, make sure the Roll cover is cleaned and lubricated properly.
The main spring is positioned in the main shaft in the canister. The spring tension has
been adjusted by delivery and is ready to use.
Spring tension can easily be adjusted. At the right side of the canister end piece there is
a pinion. (Fig. 21) To adjust the tension:
Press the shaft inward to release the locking mechanism. Use a small wrench with
an 8 mm key: (Fig. 22)
While maintaining pressure on the shaft, adjust clockwise to increase spring
tension and make the Roll cover open faster (Fig. 23)
While maintaining pressure on the shaft, adjust anticlockwise to reduce spring
tension and make the Roll cover open slowly (Fig. 23)
WARNING - The main spring may cause injury if the canister is opened without relieving
the spring tension.
08/12
Autres manuels pour Roll
4
Table des matières
Autres manuels Mountain Top Accessoires automobiles
Mountain Top
Mountain Top MTR VW80 H02 Manuel utilisateur
Mountain Top
Mountain Top Mountain Top Style Manuel utilisateur
Mountain Top
Mountain Top MTC800-ROLL Manuel utilisateur
Mountain Top
Mountain Top Roll Manuel utilisateur
Mountain Top
Mountain Top EVOe Manuel utilisateur
Mountain Top
Mountain Top Wildtrak Manuel de programmation
Mountain Top
Mountain Top Roll Manuel utilisateur
Mountain Top
Mountain Top MTC295-ROLL/-B Manuel utilisateur
Mountain Top
Mountain Top Sports Bar Manuel utilisateur
Mountain Top
Mountain Top MTC500-ROLL/-B Manuel utilisateur
Mountain Top
Mountain Top CB FLEX LB04 Manuel utilisateur
Mountain Top
Mountain Top MTS FO10 A01 Manuel utilisateur
Mountain Top
Mountain Top MTI 886 070 Manuel utilisateur
Mountain Top
Mountain Top SBE 0004 Manuel utilisateur
Mountain Top
Mountain Top 892-110 Manuel utilisateur
Mountain Top
Mountain Top Roll Manuel utilisateur
Mountain Top
Mountain Top EVOm Series Manuel utilisateur
Mountain Top
Mountain Top Roll Bar Manuel utilisateur
Mountain Top
Mountain Top MTC314-ROLL Manuel utilisateur
Mountain Top
Mountain Top MTRA IS10 H57 Manuel utilisateur
