Moulinex HM6151 Manuel utilisateur

dc e

fff

n2 o3

910

SAFETY INSTRUCTIONS

Before using your appliance for the

first time, please read these

instructions carefully and follow the

appliance’s instructions for use.

• Before plugging the appliance into

the mains, check that the

appliance’s supply voltage is

compatible with that of your

electricity supply. Otherwise, you

could damage the appliance or

hurt yourself. Any error in

connection will invalidate the

warranty.

• This appliance has been designed

for domestic use only. Use of the

appliance for commercial or

professional purposes may

overload the appliance, causing

damage to the appliance, or

personal injury. The guarantee shall

no longer apply in such conditions.

• To avoid electric shocks, never use

the appliance with wet hands or

on a damp or wet surface. Avoid

wetting the appliance’s electrical

components. Never immerse them

in water.

• Do not allow children to use the

appliance unsupervised.

• This appliance is not intended for

use by persons (including children)

with reduced physical, sensory or

mental capacities, or persons with

a lack of experience or knowledge,

unless they are supervised or have

been given instructions on how to

use the appliance by a person

responsible for their safety.

• Children should be supervised to

ensure that they do not play with

the appliance.

• Always unplug the appliance when

you have finished using it, when

assembling and disassembling

accessories and during cleaning.

• Do not use your appliance if it does

not operate correctly, if it has been

damaged or if the power cord or

plug is damaged.

To avoid all danger, these parts

must be replaced by an approved

service centre (see list in the

service booklet).

• Any maintenance other than

routine cleaning and upkeep by

customers must be carried out by

an approved service centre.

• Do not immerse the appliance,

cord or plug in liquid.

• The power cord must be kept out of

the reach of children and must not

be placed near or come into

contact with the hot parts of the

appliance, sources of heat or

sharp corners.

• To ensure that the guarantee

remains valid and avoid any

technical problems, never try to

disassemble or repair the

appliance yourself and do not let

an unqualified person do so. Bring

your appliance to an approved

service centre for repair.

• Do not move or unplug the

appliance by pulling on the cord

as it may cause an accident or

cause the appliance to

malfunction.

• The use of elements and

accessories not recommended by

the manufacturer may lead to

personal injury, damage to the

appliance or faulty operation, and

the warranty will no longer apply.

• To avoid electric shocks, make sure

that your fingers do not come into

contact with the prongs on the

plug when you plug in or unplug

the appliance.

• Do not plug other appliances into

the same mains socket using

adapters to avoid any electrical

overload which could damage the

appliance or cause an accident.

Do not use an extension lead

unless you have checked it is in

good condition.

For your safety, this appliance

complies with applicable standards

and regulations:

- Low Voltage Directive

- Electromagnetic Compatibility

- Environment

- Materials in contact with food

• To avoid all accidents, make sure

that your hair, clothes and other

objects do not get caught in the

moveable parts of the appliance.

• Whilst in operation do not touch

the beaters or mixers and do not

insert any object (knife, fork, spoon,

etc.) to avoid hurting yourself and

causing an accident to others or

damaging the appliance. You may

use a spatula once the product is

not in operation.

• To avoid damaging the appliance,

never place the appliance and its

accessories in the freezer, oven or

microwave.

• The accessories are designed to

prepare food products.

Do not use them to mix other

products.

• Do not use the mini mincer or the

blender bowl accessories without

the stabilising base.

DESCRIPTION

a. Mixer

a1. Ejection button to remove

kneaders or beaters

a2. Speed control/ turbo button

b. Multi-blade beaters for light

preparations

(depending on model)

c. Multi-blade beaters for light

preparations

(depending on model)

d. Kneaders for heavy dough

(depending on model)

e. Kneaders for heavy dough

(depending on model)

f. Metal collar

g. Base (depending on model)

h. Bowl (depending on model)

i. Hinged arm lock/unlock button

(depending on model)

j. Mixer lock/unlock button

(depending on model)

k. Spatula (depending on model)

l. Plastic blender shaft (depending

on model)

m. Stainless steel blender shaft

(depending on model)

n. 500 ml mini-chopper

(depending on model)

n1 Bowl

n2 Blade

n3 Reducer

o. 800 ml blender bowl

(depending on model)

o1 Graduated bowl

o2 Blade

o3 Leak-tight lid

o4 Reducer

p. Measuring bowl (depending on

model)

q. Stabilising base (depending on

model)

r. Lid (depending on model)

BEFORE FIRST USE

• Remove the accessories from their

packaging and clean using warm

water.

Attention: The blender shaft (l or m)

and the blade of the mini-chopper

(n2) and of the blender bowl (o2)

are very sharp. Care should be

taken when handling.

USING THE APPLIANCE

Important:

NEVER USE THE BEATERS OR

KNEADERS AT THE SAME TIME AS THE

BLENDER SHAFT, MINI-CHOPPER OR

BLENDER BOWL.

MIXER FUNCTION WITH BEATERS

OR KNEADERS:

• Manual use:

• Check that the appliance is

unplugged, that the speed control

(a2) is set to "0" and that there is

neither blender shaft, nor mini-

chopper nor blender connected to

the back of the appliance.

• Insert the rods of each beater (b)

or kneader (d) into the

corresponding holes and lock into

place. The beaters and kneaders

have a specific shape. The

kneader or beater equipped with

the metal collar (f) should be

positioned to the left into the

biggest hole (Fig. 1).

• Connect the appliance:

- Your appliance has 5 speed

levels and a turbo button. Always

begin mixing or kneading at

speed 1 initially, then move to

speed 2, 3, 4 or 5 (Fig. 2).

- To knead thick dough, we

recommend using speed 5 only.

- You can also increase the speed

by pressing the turbo button. We

however recommend that you use

it only briefly (a maximum of 30

seconds for thick dough).

• After finishing, set the speed control

(a2) to "0".

• Disconnect.

• Then press the ejection button (a1)

to remove the beaters or kneaders.

• Using with the base (g):

(depending on model)

• Check that the appliance is

unplugged, that the speed control

(a2) is set to "0" and that there is

no blender shaft.

• Insert the rods of each beater (c)

or kneader (e) into the

corresponding holes and lock into

place. The beaters and kneaders

have a specific shape. The

kneader or beater with the metal

collar (f) should be positioned to

the left, in the biggest hole (Fig. 1).

• Place the base (g) on the worktop:

- To raise the arm, unlock by

pressing the button (i) (Fig. 3).

- Position the bowl (h) (Fig. 3).

- Press the button (i) to unlock the

arm and lower it (Fig. 4).

- Place the mixer fitted with the

kneaders or beaters on the

hinged arm until you hear it click

into place (Fig. 5).

Note:

INSERT THE MIXER BY POSITIONING

THE BEATERS OR KNEADERS IN THE

NOTCHES (Fig. 5).

• Connect the appliance:

- Your appliance has 5 speed levels

and a turbo button. Always begin

mixing or kneading at speed 1

initially, then move to speed 2, 3,

4 or 5 (Fig. 2).

- To knead thick dough, we

recommend using speed 5only.

- You can also increase the speed

by pressing the turbo button (a2);

We however recommend that you

use it only briefly (a maximum of

30 seconds for thick dough).

• After finishing, set the speed control

(a2) to "0".

• Disconnect and press the unlock

button (i) to raise the hinged arm.

Then press the mixer unlock button

(j) to remove the mixer from its

stand.

• Then press the ejection button (a1)

to remove the beaters or kneaders.

BLENDER FUNCTION

(DEPENDING ON MODEL)

• Check that the appliance is

unplugged, that the speed control

(a2) is set to "0" and that the

beaters or kneaders have been

removed from the appliance.

• Lift the panel at the back of the

appliance and screw the blender

shaft (l or m) anti-clockwise

without forcing it until you hear a

click (Fig. 6).

• Connect the appliance:

- Dip the blender shaft into the

preparation before starting to

avoid splashing.

- Start using the speed control (a2),

(Fig. 2), initially at speed 1then 2,

3, 4, 5. Use the Turbo button (a2) if

the recipe requires more power.

- Stop the appliance before

removing the blender shaft from

the preparation (to avoid

splashing).

If you feel resistance when screwing

in, this means that shaft is not

correctly aligned.

You should remove it completely

and screw it in again correctly.

Removing the blender shaft:

• Stop the appliance by selecting

"0", disconnect it and unscrew the

blender shaft (l or m) by turning

clockwise.

Do not use the blender shaft:

• In a saucepan on the hob.

• Do not use it empty or with ice

cubes, to chop raw meat, dried fruit

(almonds, hazelnuts, etc.).

500ML MINI-CHOPPER

FUNCTION

(DEPENDING ON MODEL)

- Place the bowl (n1) on the

stabiliser base (q).

- Place the blade (n2) on the shaft

of the bowl (n1).

- Place the food in the bowl (n1)

and then place the reducer (n3).

• Check that the appliance is

unplugged, that the speed control

(a2) is set to "0" and that the

beaters or kneaders are no longer

on the appliance.

- Lift the panel at the back of the

appliance and place the

appliance on the reducer (n3) of

Autres manuels Moulinex Appareils de cuisine

Moulinex

Moulinex ME 610 Manuel utilisateur

Moulinex

Moulinex MK706A32 Manuel utilisateur

Moulinex

Moulinex CLICKCHEF HF452110 Manuel utilisateur

Moulinex

Moulinex FRUTTI PRO JU 4001 Manuel utilisateur

Moulinex

Moulinex Masterchef Gourmet + Manuel utilisateur

Moulinex

Moulinex Juice Express JU550D10 Manuel utilisateur

Moulinex

Moulinex COMPANION XL Manuel utilisateur

Moulinex

Moulinex ULTRACOMPACT SM156140 Manuel utilisateur

Moulinex

Moulinex Cookeo EPC03 Series Manuel utilisateur

Moulinex

Moulinex FG3608 Manuel utilisateur

Moulinex

Moulinex Turbo Cuisine Maxi CE77 Manuel utilisateur

Moulinex

Moulinex JU585H Manuel utilisateur

Moulinex

Moulinex Break Time Manuel utilisateur

Moulinex

Moulinex Cookeo Touch Pro Manuel utilisateur

Moulinex

Moulinex MK7051 Manuel utilisateur

Moulinex

Moulinex Nutri XXL Manuel utilisateur

Moulinex

Moulinex Fresh Max Manuel utilisateur

Moulinex

Moulinex HV8 ME625 Manuel utilisateur

Moulinex

Moulinex QA205110 Manuel utilisateur

Moulinex

Moulinex MK708810 Manuel utilisateur

Moulinex

Moulinex SM156D Manuel utilisateur

Moulinex

Moulinex cookeo touch EPC13 Series Manuel utilisateur

Moulinex

Moulinex i-companion touch xl Manuel utilisateur

Moulinex

Moulinex Extra Crisp Cookeo EZ1508 Manuel utilisateur

Manuels Appareils de cuisine populaires d'autres marques

Tayama

Tayama TYG-35AF Manuel utilisateur

AEG

AEG 43172V-MN Manuel utilisateur

REBER

REBER Professional 40 Guide de l'utilisateur

North American

North American BB12482G / TR-F-04-B-NCT-1 Manuel utilisateur

Presto

Presto fountain popper Manuel utilisateur

Westmark

Westmark 1035 2260 Manuel utilisateur

Zanussi

Zanussi ZCG64396XA Manuel utilisateur

HOFFEN

HOFFEN SM-9302M Manuel utilisateur

Philips

Philips HD3133 Manuel utilisateur

Ronco

Ronco Beef Jerky Manuel utilisateur

Hendi

Hendi 470411 Manuel utilisateur

Livoo

Livoo MEN386 Manuel utilisateur

Vogue

Vogue D446 Manuel utilisateur

croydon

croydon WR-10313-700 Manuel utilisateur

ADE

ADE AUTOMATIC-L Manuel utilisateur

Chefman

Chefman RJ43-SQ Series Manuel utilisateur

Vacmaster

Vacmaster VP680 Manuel utilisateur

Jetmaster

Jetmaster 900HG Manuel utilisateur