Motorola GM1200E Manuel utilisateur

European Publications Department (RPG) Fleet, Hampshire, England

Issue: May 1998

GM1200E

Mobile Radio

Dealer Programming Software

(DPS) Installation Manual

68P64113B09

DPS Installation 1-i

Chapter 1

DPS Installation

Table of Contents

Paragraph Page

1.0 Introduction

................................................................................................ 1

2.0 GM1200E Mobile Radio Connection Information

.................................... 2

2.1 Configuring the RIB and GM1200E Radio............................................... 2

3.0 Installing the Dealer Programming Software

.......................................... 3

Table of Contents

1-ii DPS Installation

Introduction

DPS Installation 1-1

1.0 Introduction

This chapter provides an overview of the GM1200E Dealer Programming Software (DPS) and shows how to

connect the radio to a computer and install the programming software.

The user manual for the DPS is contained within the application and can be printed if required.The user

manual is independant of the DPS screens and can be viewed at any time during programming.

The opening sections of the user manual should be read to gain a clear understanding of the DPS functionality.

When programming individual ﬁelds there is also help text available.This is ﬁeld speciﬁc and allows a more

detailed description than that given in the user manual.

GM1200E Mobile Radio Connection Information

1-2 DPS Installation

2.0 GM1200E Mobile Radio Connection Information

To run the Dealer Programming Software (DPS), you will need the following equipment:

IBM 486 or equivalent with 16MByte RAM, Hard Disk with 10MBytes free disk space and

3.5” Floppy Disk Drive.

MSDOS 5.0™, Windows 3.1™, Windows 95™ and Windows NT

Radio Interface Box (RIB)

RLN4008.

RIB to Computer, cable

3080369B71 / 72.

RIB power supply

EPN4040 / EPN4041

(220 VAC) or 9V battery.

Radio to RIB, Programming/Test cable

GTF372

Radio Power Supply

GPN6133

or equivalent.

Figure 1-1

GM1200E Radio Programming Setup.

2.1 Conﬁguring the RIB and GM1200E Radio

Connect the RIB to the computer (Figure 1-1) using the interface cable 3080369B71 or 3080369B72

depending on the computer connection to Serial COM Port 1.If you are unsure of the connection on the

back of your computer or the COM port, then please consult the computer manuals.

Plug the 25 pin end of the Radio programming cable, GTF372 into the RIB.Then plug the other end into

the MIC connector on the radio.

Connect the RIB Power supply to the RIB and plug the other end into a wall outlet, (alternatively a 9V

battery may be used instead of the power supply).

Connect the radio to a power source and press the On/Off button to turn the radio on.

Software

Computer

HKN4191

DC cable for base

operation or equivalent.

Note: 9V (PP9) Battery

can be used making

power supply optional.

User Manual

GPN6133

Power Supply

or equivalent

GM1200E

Mobile Radio

GTF372

Std programming cable.

Plugs between the RIB and

radio MIC connector.

RLN4008

Radio

Interface

Box

RIB to Computer Cable.

Plugs into RIB and computer.

3080369B71 Interface cable IBM XT 25pin

3080369B72 Interface cable IBM AT 9pin

RIB Power Supply

EPN4040 PSU U.K. plug

EPN4041 EURO plug

25 PIN

15 PIN

Installing the Dealer Programming Software

DPS Installation 1-3

3.0 Installing the Dealer Programming Software

To install the DPS into MicrosoftWindows 3.1™

Switch on the PC and then insert the Windows 3.1 DPS disk into A: drive.

At the DOS prompt type

WIN

<return>.

On entering the Windows 3.1 environment, from the Program Manager, open the FILE menu and select

RUN.

Type

a:\setup

and select OK.

Internal system checks are performed before installation begins to locate previous versions.If a previous

version is located it will be used as the default destination.This destination can only be changed once

on installation and will overwrite previous versions if located at that destination.

At the DPS Installation prompts enter the required details,

- Destination

- ComPort 1-4?

- Language

- User Name

- Company Name

- Program Group for DPS icon

- Do you wish to installY/N?

The installer program checks whether a DPS variant is already at the chosen destination, otherwise

installation will not be permitted.The installer program will however, allow the same variant to be

overwritten when upgrading the DPS to the current version.

After all of the prompts have been answered, the DPS will be installed as speciﬁed.

To run the DPS double click on the DPS icon, in the DPS group folder or:

If selection is made via the menus, from the FILE menu select RUN and then BROWSE on the C: drive

to ﬁnd the

WGM1200E.EXE

ﬁle and then select OK.

To install the DPS into MicrosoftWindows 95™ orWindows NT™

Switch on the PC and then insert the Windows 95™ or NT™ DPS disk into A: drive.

On entering the Windows 95/NT environment, from the Taskbar select the START menu and select

RUN.

Follow steps 4-8 above.

To run the DPS , from the Taskbar select the START menu and via the Program menu select the

GM1200E DPS or:

If selection is made via the menus, from the Explorer menu select FILE, then select RUN and then

BROWSE on the C: drive to ﬁnd the GM1200E DPS ﬁle and then select OK.

Installing the Dealer Programming Software

1-4 DPS Installation

Autres manuels pour GM1200E

Table des matières

Autres manuels Motorola Radio

Motorola

Motorola Syntor X9000 Manuel du propriétaire

Motorola

Motorola T600 FRS Manuel utilisateur

Motorola

Motorola TLKR T8 Manuel utilisateur

Motorola

Motorola CP040 Manuel d'utilisation et d'entretien

Motorola

Motorola GM1200E Manuel utilisateur

Motorola

Motorola Pro3100 Manuel utilisateur

Motorola

Motorola MTM800 FuG ET Manuel utilisateur

Motorola

Motorola ASTRO Digital XTS 3000 Manuel utilisateur

Motorola

Motorola MTP6550 Manuel utilisateur

Motorola

Motorola Radius Manuel utilisateur

Motorola

Motorola GP600 Series Manuel utilisateur

Motorola

Motorola Astro XTL 5000 Manuel utilisateur

Motorola

Motorola GM950 Manuel utilisateur

Motorola

Motorola ASTRO APX Manuel de service

Motorola

Motorola Radius m100 Manuel utilisateur

Motorola

Motorola PRO5100 Manuel utilisateur

Motorola

Motorola ASTRO XTS 5000 III Manuel utilisateur

Motorola

Motorola MCS 2000 Manuel utilisateur

Motorola

Motorola MAG ONE Manuel utilisateur

Motorola

Motorola Spectra A3 Guide de configuration

Motorola

Motorola SABER NTN4734A Manuel utilisateur

Motorola

Motorola GM328 Manuel utilisateur

Motorola

Motorola PM1200 Manuel utilisateur

Motorola

Motorola GP series Manuel d'utilisation et d'entretien

Manuels Radio populaires d'autres marques

EisSound

EisSound KBSound iSelect Manuel utilisateur

Midland

Midland 1001LWX Manuel utilisateur

Konig

Konig HAV-SR41 Manuel utilisateur

Roberts

Roberts exprssion Manuel utilisateur

VDigi

VDigi DD3.0 Manuel utilisateur

Radio Shack

Radio Shack 21-1863 Manuel utilisateur

Roberts

Roberts Stream 207 Manuel utilisateur

Sony

Sony Walkman SRF-M97 Manuel utilisateur

Stanley

Stanley FatMax FMC770 Manuel utilisateur

auna

auna DAB-Radio 10026947 Manuel utilisateur

SOUNDMASTER

SOUNDMASTER UR190 Manuel utilisateur

HYT

HYT TC-320 Manuel utilisateur

auna multimedia

auna multimedia Yellowstone 10026851 Manuel utilisateur

B-Tech

B-Tech GMRS-V2 Manuel utilisateur

Weierwei

Weierwei VEV-V8 Manuel utilisateur

SOUNDMASTER

SOUNDMASTER DAB750 Manuel utilisateur

Telefunken

Telefunken TF-1505 Manuel utilisateur

Makita

Makita LXRM03 Manuel utilisateur