Motorola SURFboard Cable Modem Manuel utilisateur

Title

SURFboard Cable Modem User Guide

SURFboard Cable Modem User GuideSURFboard Cable Modem User Guide

SURFboard Cable Modem User Guide

Click your selection:

Introduction

Introduces your SURFboard cable modem and the controls on the Top and Front Panel

and Rear Panel.

Before You Begin

Lists the items needed to install your SURFboard cable modem and describes

Precautions,Signing Up for Service,andComputer System Requirements.

Installation and Configuration Overview

Provides an overview and links to cable and configure your SURFboard cable modem,

including SettingUpaUSBDriver.

Troubleshooting

Provides suggestions to fix common problems.

Provides contact information.

Frequently Asked Questions

Provides answers to common questions about the SURFboard cable modem.

SURFboard

Cable Modem

ii SURFboard Cable Modem User Guide

Home Print Exit

WARNING: TO PREVENTFIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS DEVICE TO RAIN OR MOISTURE. THE DEVICE SHALL NOT

EXPOSED TO DRIPPING OR SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES, SHALL BE PLACED ON THE DEVICE.

CAUTION: TO ENSURE REGULATORY AND SAFETY COMPLIANCE, USE ONLY THE PROVIDED POWER AND INTERFACECABLES. TO

PREVENT ELECTRICAL SHOCK, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE, OR OTHER OUTLET UNLESS THE

BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.

CAUTION: DO NOT OPEN THE CABLE MODEM. DO NOT PERFORM ANY SERVICING OTHER THAN THAT CONTAINED IN THE

INSTALLATION AND TROUBLESHOOTING INSTRUCTIONS UNLESS YOU ARE QUALIFIED TO DO SO. REFER ALL SERVICING TO

QUALIFIED SERVICE PERSONNEL.

It is recommended that the customer install an AC surge arrestor in the AC outlet to which this device is connected. This is to avoid damaging the

equipment by local lightning strikes and other electrical surges.

This product was qualified under test conditions that included the use of the supplied cable between system components. To be in

compliance with regulations, the user must use this cable and install it properly.

Different types of cord sets may be used for connections to the main supply circuit. Use only a main line cord that complies with all

applicable product safety requirements of the country of use.

Installation of this product must be in accordance with national wiring codes.

To prevent overheating, do not block the ventilation holes on the sides of the cable modem.

Wipe the cable modemwith a clean, dry cloth. Never use cleaning fluid or similarchemicals. Do notspray cleaners directly on theunit oruse forced

air to remove dust.

iii SURFboard Cable Modem User Guide

Home Print Exit

This product is provided with a separate Regulatory and Safety Information and Software License and Warranty Information card. If one is not

provided with this product, please ask your service provider or point-of-purchase representative, as the case may be.

■ THIS PRODUCT IS IN COMPLIANCE WITH ONE OR MORE OF THE STANDARDS LISTED ON THE REGULATORY AND SAFETY

INFORMATION CARD. NOT ALL STANDARDS APPLY TO ALL MODELS.

■ NO WARRANTIES OF ANY KIND ARE PROVIDED BY MOTOROLA WITH RESPECT TO THIS PRODUCT, EXCEPT AS STATED ON THE

SOFTWARE LICENSE AND WARRANTY INFORMATION CARD. MOTOROLA’S WARRANTIES DO NOT APPLY TO PRODUCT THAT

HAS BEEN REFURBISHED OR REISSUED BY YOUR SERVICE PROVIDER.

without written permission from Motorola, Inc.

Motorola reserves the right to revise this publication and to make changes in content from time to time without obligation on the part of Motorola to provide notification of such revision or

change. Motorola provides this guide without warranty of any kind, either implied or expressed, including, but not limited to, the implied warranties of merchantability and fitness for a

particular purpose. Motorola may make improvements or changes in the product(s) described in this manual at any time.

MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. Microsoft and Windows are registered trademarks and

Windows Me and Windows XP are

trademarks of

Microsoft Corporation. Microsoft Windows screen shots are used by permission of Microsoft Corporation. Macintosh is a registered

trademark

of Apple Computer, Inc.

Netscape and Navigator are registered trademarks of

Netscape Communications Corporation

. UNIX is a registered trademark of the Open Group in the United States and other countries. All

other

product or service names are the property of their respective owners. © Motorola, Inc. 2002.

iv SURFboard Cable Modem User Guide

Home Print Exit

Contents

Introduction ..............................................................................................................................1

Top and Front Panel .................................................................................................................2

Rear Panel .................................................................................................................................3

Before You Begin .....................................................................................................................4

Precautions ...............................................................................................................................5

Signing Up for Service .............................................................................................................6

Computer System Requirements ............................................................................................7

Ethernet Card ........................................................................................................................7

USB Connection ...................................................................................................................7

Installation and Configuration Overview ...............................................................................8

Cabling and Startup for a Single User ....................................................................................9

Setting Up a USB Driver ........................................................................................................11

Setting Up a USB Driver in Windows 98 ..............................................................................12

Setting Up a USB Driver in Windows 2000 ..........................................................................16

Setting Up a USB Driver in Windows Me .............................................................................20

Setting Up a USB Driver in Windows XP ..............................................................................21

Configuring TCP/IP ................................................................................................................22

vSURFboard Cable Modem User Guide

Home Print Exit

Configuring TCP/IP in Windows 95, 98, or Me .....................................................................23

Configuring TCP/IP in Windows 2000 or XP ........................................................................26

Verifying the IP Address in Windows 95, 98, or Me ...........................................................30

Verifying the IP Address in Windows 2000 or XP ...............................................................31

Cabling for Multiple Users .....................................................................................................33

Ethernet and USB ...............................................................................................................33

Ethernet ..............................................................................................................................34

Troubleshooting .....................................................................................................................35

Front-Panel Lights and Error Conditions .............................................................................37

Removing the USB Driver from Windows 98 or Me ............................................................38

Removing the USB Driver from Windows 2000 ...................................................................42

Removing the USB Driver from Windows XP ......................................................................47

Contact Us ..............................................................................................................................54

Frequently Asked Questions .................................................................................................55

Glossary ..................................................................................................................................57

Software License ....................................................................................................................59

1SURFboard Cable Modem User Guide

Home Print Exit

Introduction Before You Begin Installation & Configuration FAQ

Troubleshooting

Glossary License

Introduction

Congratulations, you have a new Motorola®SURFboard cable modem! It provides

high-speed access to the Internet and other online services. This cable modem transmits

and receives data much faster than traditional dial-up or ISDN modems. Unlike a dial-up

modem, your SURFboard cable modem is always online. Just open your browser and

surf!

You can use your high-speed, upgradeable cable modem to connect one or more

computers in your home or business to the Internet. You can connect:

■ A single computer equipped with a Universal Serial Bus (USB) port directly to the

USB port on the SURFboard cable modem

■ A single computer equipped with anEthernet adapter directly to the Ethernet port on

the SURFboard cable modem

■ Two computers; one to the USB port and one to the Ethernet port

■ Up to 32 computers to a single SURFboard cable modem using an Ethernet hub

Easier!

Unlike dial-up modems or ISDN, you’re always on,

always connected. For easiest set-up, use the

Installation Assistant on the SURFboard Cable

Modem CD-ROM.

Faster!

Your cable modem is up to 100 times faster than a

dial-up modem. It lets you enjoy surfing the web

without the long wait. Because many network and

other factors can affect performance, the actual

speed will vary.

Better!

Your cable modem is made by the company with

over 50 years of cable TV expertise.

2SURFboard Cable Modem User Guide

Home Print Exit

Introduction Before You Begin Installation & Configuration FAQ

Troubleshooting

Glossary License

Top and Front Panel

For added security, you can press the Standby button (1) to suspend your Internet

connection. No data is transmitted or received and the Standby button lights. All other

lights turn off until you press the Standby button again. The Standby button may be

located on the top of the SURFboard cable modem (as illustrated) or on the front.

The lights provide information about power, communications, and errors:

During normal operation, the Power, Receive, Send, and Online lights are on and the

Activity light flashes when the cable modem is transferring data.

Key Light Flashing On

2PowerStartup diagnostics in progress The cable modem is powered on

3 Receive Scanning for a receive

(downstream) channel connection The downstream channel is

connected

4Send Scanning for a send (upstream)

channel connection. The upstream channel is connected

5OnlineScanning for a network

connection The startup process is complete

6 Activity Transmitting or receiving data Transferring a large amount of data

7 Standby This light does not flash Internet service is blocked because

the Standby button was pressed. If

this light is on, all other lights are off.

The model number and Standby button position

on your cable modem may be different than in

the illustrations and screen images in this guide.

3SURFboard Cable Modem User Guide

Home Print Exit

Introduction Before You Begin Installation & Configuration FAQ

Troubleshooting

Glossary License

Rear Panel

The rear panel provides cabling connectors, status lights, and the power receptacle.

Key Item Description

1The Ethernet port provides a connection to Ethernet equipped computers

using a cable terminated with an RJ-45 connector. The adjacent lights are:

LINK/ACT — On when the Ethernet connection is available. It blinks during

data transfer.

100 — On if there is a 100Base-T link and off for a 10Base-T link.

2USBThe USB port provides a connection to USB equipped computers.

3•If you experience a problem, you can push this recessed button to reset the

cable modem (see “Troubleshooting” on page 35). Resetting may take 5 to

30 minutes because the cable modem must find and lock on the appropriate

communications channels.

4 CABLE The CABLE port provides a connection to the coaxial cable (coax) outlet.

5POWERThe POWER connector provides power to the cable modem.

4SURFboard Cable Modem User Guide

Home Print Exit

Introduction Before You Begin Installation & Configuration FAQ

Troubleshooting

Glossary License

Before You Begin

Before you begin the installation, check that you received the following items with your

SURFboard cable modem:

You will need 75-ohmcoaxial cable (coax) with F-type connectors to connect your cable

modem to the nearest cable outlet. If a TV is connected to the cable outlet, you may

need a 5-900 MHz RF splitter and two additional coaxial cables to use both the TV and

the cable modem. The coaxial cable and RF splitter are available at consumer electronic

stores.

Item Description

Power cord Connects the SURFboard cable modem to the AC

electrical outlet

10/100Base-T

Ethernet cable Connects to the Ethernet port

USB cable Connects to the USB port

SURFboard Cable

Modem CD-ROM Contains the User Guide and USB drivers

5SURFboard Cable Modem User Guide

Home Print Exit

Introduction Before You Begin Installation & Configuration FAQ

Troubleshooting

Glossary License

Precautions

Postpone cable modem installation until there is no risk of thunderstorm or lightning

activity in the area.

To avoid damaging the cable modem with static electricity:

■ Always first connect the coaxial cable to the grounded cable TV wall outlet.

■ Before you connect or disconnect the USB or Ethernet cable from your cable

modem or PC, always touch the coaxial cable connector on the cable modem to

release any static charges.

To prevent overheating the cable modem, do not block the ventilation holes on its sides.

Do not open the cable modem. Refer all service to your cable service provider.

Wipe the cable modem with a clean, dry cloth. Never use cleaning fluid or similar

chemicals. Do not spray cleaners directly on the unit or use forced air to remove dust.

To avoid damaging your cable

modem or PC with static electricity:

Always make the

wall connection first.

Before you connect or disconnect the USB or

Ethernet cable, always touch the coaxial

cable connector on the cable modem.

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Motorola Carte réseau

Motorola

Motorola WMC6300 Manuel utilisateur

Motorola

Motorola BLE87 Manuel utilisateur

Motorola

Motorola Communications Gateway Manuel utilisateur

Motorola

Motorola WN825G Mode d’emploi

Motorola

Motorola WMC7300715 Manuel utilisateur

Motorola

Motorola MSC8101 ADS Manuel utilisateur

Motorola

Motorola Canopy Backhaul Module Manuel utilisateur

Manuels Carte réseau populaires d'autres marques

FirstComm

FirstComm OBiWiFi5G Manuel utilisateur

Sun Microsystems

Sun Microsystems Interface Adapter Manuel utilisateur

TRENDnet

TRENDnet TU2-ETG Manuel utilisateur

YASKAWA

YASKAWA SI-EN3 Manuel utilisateur

Paradyne

Paradyne BitStorm 2600 IP DSLAM Manuel utilisateur

Belkin

Belkin F5D7050 Manuel utilisateur

3Com

3Com EtherLink 3C509B Manuel utilisateur

TRENDnet

TRENDnet TEG-PCITX Manuel utilisateur

Cisco

Cisco MC16E Manuel utilisateur

Delta Electronics

Delta Electronics Braking Modules VFDB Series Manuel utilisateur

TwinMOS

TwinMOS Booming Manuel utilisateur

Dialogic

Dialogic Media Board DM/V1200BTEPEQ Manuel utilisateur

Buffalo

Buffalo AirStation WLI-PCM-L11GP Manuel utilisateur

National Instruments

National Instruments NI 9234 Manuel utilisateur

Hama

Hama 49276 Manuel utilisateur

Linksys

Linksys WCF54G - Wireless-G Compact Flash Card Manuel d'utilisation

Compaq

Compaq Wireless LAN 100 Manuel utilisateur

Bose

Bose PowerMatch Dante Manuel utilisateur