Motorola RSVP Manuel utilisateur

User’s Guide

THE UNION OF

PAGING AND CELLULAR

TECHNOLOGIES

INTRODUCTION

Your RSVP Numeric Display Pager turns any Motorola Micro-

TAC™ or retail pocket personal cellular telephone into the

ultimate personal communicator. RSVP also features a

removable and rechargeable, ultra-thin, Nickel-Metal-

Hydride cellular battery.

RSVP slides onto the back of your phone in place of the

existing battery unit, providing the control and convenience of

a pager and a phone in a single unit.

RSVP allows you to manage your cellular phone trafﬁc, return

calls at your convenience, screen calls, extend phone battery

life, and even remain accessible while your phone is turned

off.

Paging Features Summary:

●

Eight numeric message slots

●

12-digit numeric display

●

Displays time of day

●

Backlit display

●

Message time stamping

●

Musical alert

●

Programmable alarm

●

Vibrate or audible mode

●

Retains messages while with reminder alert

turned off and when

replacing battery

Battery Features Summary:

●

Fits any Motorola

●

Battery is detachable

MicroTAC or retail pocket from pager unit

personal cellular telephone

●

Spare batteries are

●

Powerful and small enough to carry in

environmentally friendly a shirt pocket

Nickel-Metal-Hydride

●

One hour talk time,

battery eight hours standby

USINGTHIS GUIDE

This user’s guide describes the following:

●

How to remove your

●

Maintain your RSVP

cellular phone’s existing pager in top operating

battery condition

●

Set up and operate your

●

Use the RSVP cellular

pager battery and optional

charger adapter

PROCEDURE FOR CONNECTINGYOUR NEW

RSVP PAGERTOYOUR CELLULAR PHONE

Remove battery from any Motorola MicroTAC or retail pocket

personal cellular telephone in the following manner:

Press and

hold down

battery

release

Slide

battery

downward

against

stop

①

②

Lift battery

off cellular

phone

③

Note:

Ensure the Nickel-Metal-Hydride battery is fully

charged and installed in the RSVP pager before performing

this procedure.

Install your RSVP pager in place of the cellular phone battery

in the following manner:

PAGING SERVICE ACTIVATION

Paging service providers require certain procedures for acti-

vating your RSVP pager. Contact your service provider to

activate paging service.

③

Slide RSVP

up until pager

into placesnaps

①②

Position RSVP

with display

end toward

phone

antenna

Set RSVP

onto mounting

slide approximately

one inch below

battery release

CONTROLS AND DISPLAY INDICATORS

The locations and descriptions of the RSVP pager controls

and display indicators are shown below:

Backlight/Reset

Button (●)

On/Read/

Select

Button

Alert/Backlight

Indicator

Battery Charger

Programmer

Contacts

(X)

(W)Menu/Lock

Button

Display

10:47a

[

12:48p

Message

Lock

Indicator

Alarm

Indicator

Alert

Mode

Indicator Continuing

Message

Indicator

Message

Slot

Number

Message

Time

Stamp

Time

of Day

Pager Display:

TURNINGYOUR PAGER ON

Press

to turn your pager on.Your pager will alert indicating

that it is on.

The time of day and the “Alert Mode” indicator, silent (

[

) or

audible (

), is displayed.

READING MESSAGES

The RSVP pager can receive up to eight 20-character mes-

sages.When a message is received, the pager alerts with an

audible or a vibrate alert, and a ﬂashing alert indication.

Press any button to stop the alert. Display your message as

follows:

Press the

button to display your message.

Messages that contain more than 12 characters are contin-

ued on a second screen.The (

) indicator means a second

screen exists.

Press

to advance to the second screen.If not selected,

the second screen is automatically displayed after one

minute.

The last screen of your message displays the message slot

number and the time the message was received.

If a message is left unread, the pager emits a reminder alert

every two minutes, and the number of unread messages is

displayed.

The pager automatically returns to the main status display

after approximately eight seconds.

TURNING ONTHE BACKLIGHT

In low light conditions, press

●

on the display backlight.

Press

●

again to turn off backlight or allow it to turn off auto-

matically.

RESET

Pressing the

●

button twice always resets the pager back to

the main display menu.

CHANGING ALERT MODES

Press

. Either “Silent?” or “Audio?” is displayed,

depending on the current mode.

. To change the alert mode, press

For your pager to vibrate, it must be in the “silent” mode.

TURNINGYOUR PAGER OFF

Press

until the “PAGER OFF?” prompt is displayed.

Press

to turn the pager off.

With the pager off, the clock is shown on the display, but not

the “Alert Mode” indicator.

SETTINGTHE ALARM

Your pager’s alarm can be set to alert you to a certain time of

day. Set the alarm as follows:

Press

until “SET ALARM?”appears on your display.

Press

to select alarm on/off sequence.

To move to the next digit, press

.To advance through

each digit, press

. Repeat this process for each ﬁeld

(On/Off, hours, minutes, AM/PM).

Press

to turn the alarm on or off.

Press the

●

button twice to return to the main display

menu.

The

indicator appears on the display when the alarm is

turned on. At the selected time, the alarm vibrates or emits a

unique 20-second alert and “ALARM” is displayed.

Press any button to stop the alarm alert.

SETTINGTHE TIME

Set the displayed time as follows:

Press

until “SETTIME?” is displayed.Then press

once.

Press

until desired hour appears.

Press

to move to the next digit.

Repeat process for each ﬁeld (hours, minutes, AM/PM).

Press the

●

button twice to return to the main display

menu.

LOCKING AND UNLOCKING MESSAGES

Locked messages cannot be erased or overwritten by new

messages when memory is full. Also, they are not lost while

replacing the battery. Up to four messages may be locked at

one time.Lock your messages as follows:

Press

while reading your message. A lock

(

)

appears

on the display to indicate your message is protected.

To unlock your message, press

while reading the

locked message.

ERASING MESSAGES FROM MEMORY

Press

until “ERASE ALL?”appears on the display.

Press

.This erases all of your read-unlocked

messages.

The “ERASE ALL?”prompt is displayed if there are read-

unlocked messages in memory.

BATTERY FEATURES

The RSVP pager features a removable and rechargeable

Nickel-Metal-Hydride cellular battery unit. RSVP replaces

your cellular phone’s battery and provides charging contacts

in an identical location.Your existing cellular charger may be

used to charge your cellular/pager unit, or with the optional

adaptor, you may also charge a spare battery in your cellular

charger.

BATTERY REPLACEMENT

Remove RSVP from your cellular telephone and replace the

RSVP battery as shown below:

Install your new battery in the reverse order of removal.

ress release

hen slide pager

ownward away

rom antenna

①②Lift pager

away from

cellular

③

Release

Turn pager over,

insert tip of ball

pen under release

and pry up on

release, then lift

battery out of

pager

CHARGINGYOUR BATTERY

Your battery may be charged while attached to your cellular

phone or separately using the optional adapter shown in the

following illustration:

Refer to the charger manufacturer’s instructions for speciﬁc

use of your charger.

PROPER CARE

The RSVP pager is durable, reliable, and can provide many

years of dependable service, but it is a precision electronic

product.Water and moisture, excessive heat, and extreme

shock may cause damage to the pager. Avoid exposing your

pager to these conditions.

Charger has

two charging

locations

RSVP

battery Adapter

Cellular phone

with RSVP and

battery

Place battery

into adapter

and insert into

chargerRSVP

with

battery

Table des matières

Autres manuels Motorola Téléphone portable

Motorola

Motorola Moto G Manuel utilisateur

Motorola

Motorola V60i Manuel utilisateur

Motorola

Motorola TEAM Badge (EWB100) Guide de référence rapide

Motorola

Motorola MOTO G FAST Feuille d'instructions

Motorola

Motorola MOTO W408g Manuel utilisateur

Motorola

Motorola XT2205-2 Manuel utilisateur

Motorola

Motorola MILESTONE 3 XT861 Manuel utilisateur

Motorola

Motorola moto g stylus 5G Manuel utilisateur

Motorola

Motorola i50sx Manuel utilisateur

Motorola

Motorola C330 Manuel utilisateur

Motorola

Motorola Clutch i465 Manuel utilisateur

Motorola

Motorola W510 Manuel utilisateur

Motorola

Motorola EX124G Manuel utilisateur

Motorola

Motorola Rapture VU30 Manuel utilisateur

Motorola

Motorola Theory Manuel utilisateur

Motorola

Motorola W208 Refresh Manuel utilisateur

Motorola

Motorola Moto e Instructions d'installation

Motorola

Motorola DROID X Manuel utilisateur

Motorola

Motorola MOTO Q 9c Manuel utilisateur

Motorola

Motorola KRZR K1 Manuel utilisateur

Motorola

Motorola T720 CDMA Manuel utilisateur

Motorola

Motorola V551 Mode d’emploi

Motorola

Motorola MOTO Q 9c Manuel utilisateur

Motorola

Motorola RAZR Manuel utilisateur

Manuels Téléphone portable populaires d'autres marques

Zte

Zte BLADE A520 Manuel utilisateur

Nokia

Nokia Lumia 620 Manuel utilisateur

Blackbe;rry

Blackbe;rry KEYone Manuel utilisateur

Bea-fon

Bea-fon X5 Premium Manuel utilisateur

Blackbe;rry

Blackbe;rry 8707 Series Manuel utilisateur

Blackbe;rry

Blackbe;rry Storm Mode d'emploi

LG LM-X420QN Manuel utilisateur

LifeWatch

LifeWatch V Manuel utilisateur

Bea-fon

Bea-fon SILVER LINE SL860 Manuel utilisateur

IKI Mobile

IKI Mobile KF4.5i Manuel utilisateur

Hitech

Hitech HT-850 Manuel utilisateur

Yezz

Yezz Fashion F10 Manuel utilisateur

Point Mobile

Point Mobile PM60 Manuel utilisateur

Blackbe;rry

Blackbe;rry Q10 Manuel utilisateur

Blackbe;rry

Blackbe;rry Bold 9900 Manuel utilisateur

Blackbe;rry

Blackbe;rry STORM 9500 - VERSION 5.0 Manuel utilisateur

LG LM-K420EMW Manuel utilisateur

ISAFE MOBILE

ISAFE MOBILE IS655.2 Manuel utilisateur