Motorline professional KVM105 Manuel d'utilisation et d'installation

v5.1

REV. 07/2021

KVM105, KVM110, KVM115

INSTALLER AND USER’S MANUAL

1A 1B

ENEN

00. CONTENT

INDEX

KVM105, KVM110 AND KVM115

PACKAGE

TECHNICAL CHARACTERISTICS

MANUAL OPENING / CLOSING

. SAFETY INSTRUCTIONS

. AUTOMATISM

AUTOMATISM INSTALLATION

INSTALLATION GUIDE

FIX CONTROL PANEL ON THE WALL

ADJUSTMENT OF LIMIT SWITCHES

. INSTALLATION

. INSTALLATION MAP

MOTOR AND CONTROL PANEL DIMENSIONS

ATTENTION:

01. SAFETY INSTRUCTIONS

This product is certified in accordance with European

Community (EC) safety standards.

This product complies with Directive 2011/65/EU of the

European Parliament and of the Council, of 8 June 2011, on

the restriction of the use of certain hazardous substances in

electrical and electronic equipment.

(Applicable in countries with recycling systems).

This marking on the product or literature indicates that the

product and electronic accessories (eg. Charger, USB cable,

electronic material, controls, etc.) should not be disposed

of as other household waste at the end of its useful life. To

avoid possible harm to the environment or human health

resulting from the uncontrolled disposal of waste, separate

these items from other types of waste and recycle them

responsibly to promote the sustainable reuse of material

resources. Home users should contact the dealer where they

purchased this product or the National Environment Agency

for details on where and how they can take these items

for environmentally safe recycling. Business users should

contact their vendor and check the terms and conditions

of the purchase agreement. This product and its electronic

accessories should not be mixed with other commercial

waste.

This marking indicates that the product and electronic

accessories (eg. charger, USB cable, electronic material,

controls, etc.) are susceptible to electric shock by direct or

indirect contact with electricity. Be cautious when handling

theproductandobserveallsafetyproceduresinthismanual.

2A EN

GENERAL WARNINGS

•This manual contains very important safety and usage information.

very important. Read all instructions carefully before beginning the

installation/usage procedures and keep this manual in a safe place

that it can be consulted whenever necessary.

•This product is intended for use only as described in this manual. Any

other enforcement or operation that is not mentioned is expressly

prohibited, as it may damage the product and put people at risk causing

serious injuries.

•This manual is intended firstly for specialized technicians, and does not

invalidate the user’s responsibility to read the “User Norms” section in

order to ensure the correct functioning of the product.

•The installation and repair of this product may be done by qualified

and specialized technicians, to assure every procedure are carried

out in accordance with applicable rules and norms. Nonprofessional

and inexperienced users are expressly prohibited of taking any action,

unless explicitly requested by specialized technicians to do so.

•Installations must be frequently inspected for unbalance and the

wear signals of the cables, springs, hinges, wheels, supports and other

mechanical assembly parts.

•Donotuse the product ifit is necessaryrepair or adjustmentisrequired.

•When performing maintenance, cleaning and replacement of parts, the

product must be disconnected from power supply. Also including any

operation that requires opening the product cover.

•The use,cleaningand maintenanceofthisproduct may becarried out by

any persons aged eight years old and over and persons whose physical,

sensorial or mental capacities are lower, or by persons without any

knowledge of the product, provided that these are supervision and

instructions given by persons with experienced in terms of usage

of the product in a safe manner and who understands the risks and

dangers involved.

•Children shouldn’t play with the product or opening devices to avoid

the motorized door or gate from being triggered involuntarily.

WARNINGS FOR TECHNICIANS

•Before beginning the installation procedures, make sure that you have

all the devices and materials necessary to complete the installation of

the product.

•You should note your Protection Index (IP) and operating temperature

to ensure that is suitable for the installation site.

•Provide the manual of the product to the user and let them know how

to handle it in an emergency.

•If the automatism is installed on a gate with a pedestrian door, a door

locking mechanism must be installed while the gate is in motion.

•Do not install the product “upside down” or supported by elements do

not support its weight. If necessary, add brackets at strategic points to

ensure the safety of the automatism.

•Do not install the product in explosive site.

•Safety devices must protect the possible crushing, cutting, transport

and danger areas of the motorized door or gate.

•Verify that the elements to be automated (gates, door, windows,

blinds, etc.) are in perfect function, aligned and level. Also verify if the

necessary mechanical stops are in the appropriate places.

•The central must be installed on a safe place of any fluid (rain, moisture,

etc.), dust and pests.

•You must route the various electrical cables through protective tubes,

to protect them against mechanical exertions, essentially on the power

supply cable. Please note that all the cables must enter the central

from the bottom.

•If the automatism is to be installed at a height of more than 2,5m from

the ground or other level of access, the minimum safety and health

requirements for the use of work equipment workers at the work of

Directive 2009/104/CE of European Parliament and of the Council of 16

September 2009.

01. SAFETY INSTRUCTIONS

3A EN

•Attach the permanent label for the manual release as close as possible

to the release mechanism.

•Disconnect means, such as a switch or circuit breaker on the electrical

panel, must be provided on the product’s fixed power supply leads in

accordance with the installation rules.

•If the product to be installed requires power supply of 230Vac or

110Vac, ensure that connection is to an electrical panel with ground

connection.

•The product is only powered by low voltage satefy with central (only

at 24V motors)

WARNINGS FOR USERS

•Keep this manual in a safe place to be consulted whenever necessary.

•If the product has contact with fluids without being prepared, it must

immediately disconnect from the power supply to avoid short circuits,

and consult a specialized technician.

•Ensure that technician has provided you the product manual and

informed you how to handle the product in an emergency.

•Ifthesystemrequiresanyrepairormodification,unlocktheautomatism,

turn off the power and do not use it until all safety conditions have

been met.

•In the event of tripping of circuits breakers of fuse failure, locate

the malfunction and solve it before resetting the circuit breaker or

replacing the fuse. If the malfunction is not repairable by consult this

manual, contact a technician.

•Keep the operation area of the motorized gate free while the gate in in

motion, and do not create strength to the gate movement.

•Do not perform any operation on mechanical elements or hinges if the

product is in motion.

RESPONSABILITY

•Supplier disclaims any liability if:

•Product failure or deformation result from improper installation

use or maintenance!

•Safety norms are not followed in the installation, use and

maintenance of the product.

•Instructions in this manual are not followed.

•Damaged is caused by unauthorized modifications

•In these cases, the warranty is voided.

01. SAFETY INSTRUCTIONS

SYMBOLS LEGEND:

• Important safety

notices

• Useful information

• Programming

information

• Potentiometer

information

• Connectors

information

• Buttons

information

4A 4B

•

•

•

•

•

• •

•

•

•

ENEN

KVM, KVM and KVM are spindle drive automatims for sectional industrial door automation,

with the possibility of horizontal or vertical application. The ease of installation,

conﬁguration and maintenance make it ideal for all sectional doors.

The automatism release system allows the user to open

manually, in case of emergency and/or power cuts.

For that just have to pull the circular chain in one direction

or another to proceed to the

manual opening or closing as shown in the picture.

In the kit you will ﬁnd the following components:

02. AUTOMATISM 02. AUTOMATISM

KVM105, KVM110 AND KVM115

KVM KVM KVM

• Lubricant Type Oil

• Noise <55dB

• Chain Type Standard chain

• Maximum limit of limit switches  motor's rotations

• Shaft Bore Diameter 25,4mm

• Working temperature -20~+45C

• IP IP54

• Power Supply V  Hz V  Hz

• Capacitor F F -

• Power W W W

• Force 70N 120N 200N

• Working frequency 25% 20%

• Thermal 120C

• Motor RPM 1400 RPM

• Reducer RPM 24 RPM

• Weight 20Kg 20,2Kg 20,7Kg

TECHNICAL CHARACTERISTICS

MANUAL OPENING / CLOSING

PACKAGE

01• 01 KVM Motor

02• 01 Control panel (with control board)

03• 01 Motor ﬁxing plate

04• 01 Chain

05• 02 Protection ring

06• 04 Motor ﬁxing screws

07• 01 Dowel

08• 01 Cable Entry Sleeves

09• 01 Release System

10• 01 Shaft Reducer

aa’

b’

02. AUTOMATISM

MOTOR AND CONTROL PANEL DIMENSIONS

KVM105 KVM110 KVM115

• Motor Dimensions (a x b x c) xx xx xx

• Reducer Width (c') 110 110 110

• Total Motor Height (a) 400 450 450

• Control Panel Dimensions

(d xe xf) xx - -

• Motor Depth (b) 236 240 240

• Total Height of Electronic Panel

(a') 282 170 170

• Distance to the center of reducer

(b') 54 55 55

• Distance between center of

screws (g) 83 83 83

30~100mm

350mm

. INSTALLATION

ASSEMBLY THE SHAFT

Leave an excess of 350mm at the spring vain through the support. Insert a protection ring

on the vain.

FIT MOTOR

Place the motor on the shaft of 3-10 cm left over from both sides.

See detail A.

MARK THE HOLES

Place the plate on the motor without tighten completely.

Touch the plate on the wall and make markings.

DRILL THE HOLES

Remove the motor's plate and make the drills to fixate the motor.

ATTACH MOTOR

Fix the plate on the wall and then fix it in the motor.

Put the protection ring on the vain, touch it to the motor and and tighten.

AUTOMATISM INSTALLATION

• The gearmotor must be installed in a protected area of shocks.

• The ﬁxation surface should be solid.

• Should be used accessories with capacity to ﬁxing the engine to surface.

• Install suitable tubes for the passage of electrical cables, to ensure the complete

protection against mechanical damage.

• The door structure must be resistant enough, with efﬁcient hinges.

• There should be no friction between ﬁxed parts and moving parts.

DETAIL A

7A 7B

click

ENEN

. INSTALLATION . INSTALLATION

FIX CONTROL PANEL ON THE WALL ADJUSTMENT OF LIMIT SWITCHES





MARK THE HOLES

Make a wall mark to a distance of 1500mm from the floor.

Put the base of the board box in the marking. Marks the drilling locals.

DRILL THE HOLES

Then proceed to the drillings.

ATTACH CONTROL BOARD

Apply the bushings and fix the board on the wall.

CONNECT CONTROL BOARD

Insert the wires through inferior side of the board box. Put the box cover.

Close the cover and press the screws until the box is completely fixed.

Loose the screw A opening

micro (right ring) and

adjust the ring until you

hear the micro click. Turn

to tighten the screw.

Make sure the door is open and make sure

about which is the opening limit-switch.

General tuning is for full tuning, looping

tuning rings.

Fine tuning is in turn a detailed tuning on

the tuning ring to achieve the most accurate

tuning.

Make sure the door is closes and repeat the 2 and 3 processes (middle ring).

Use now screw Bto a more

precisely tuner of the limit-

switch, tuning the plastic

that active the micro.

On the last micro make an identical

tuning on the opening micro so that it can

be activated just before the opening finish.

Screw A correspondes to general tuning and B is the ﬁne tuning screw.

Do not only use ﬁne tuning if you want make a full adjustment, this may damage the

tuning rings.

If the motor operates in the opposite

direction, you must change the

connections that turn on the motor,

inside the industrial box.

8A EN

. INSTALLATION MAP

INSTALLATION GUIDE

1500mm

Control Panel

with control

board

KVM105 / KVM110 /

KVM115

Motor

You can install the engine horizontally or vertically, the procedure is the same.

See detail A.

DETAIL A

Ce manuel convient aux modèles suivants

Autres manuels Motorline professional ouvre-porte

Motorline professional

Motorline professional WING400 Manuel utilisateur

Motorline professional

Motorline professional LINCE300 Manuel d'utilisation et d'entretien

Motorline professional

Motorline professional FORT Mode d’emploi

Motorline professional

Motorline professional TELICA Manuel d'utilisation et d'entretien

Motorline professional

Motorline professional SPIN Manuel d'utilisation et d'entretien

Motorline professional

Motorline professional Gateway Control SLIDE 500 Manuel utilisateur

Motorline professional

Motorline professional SIGMA X Mode d’emploi

Motorline professional

Motorline professional KAPV100 Manuel utilisateur

Motorline professional

Motorline professional LINCE Manuel d'utilisation et d'entretien

Motorline professional

Motorline professional BRAVO500-50 Manuel d'utilisation et d'entretien

Motorline professional

Motorline professional MF2020 Manuel d'utilisation

Motorline professional

Motorline professional LINCE Series Manuel d'utilisation et d'entretien

Motorline professional

Motorline professional OL1500 Manuel d'utilisation et d'entretien

Motorline professional

Motorline professional SUBWING 700 Manuel d'utilisation et d'entretien

Motorline professional

Motorline professional KFM Manuel d'utilisation et d'entretien

Motorline professional

Motorline professional LINCE400 Manuel d'utilisation et d'entretien

Motorline professional

Motorline professional FIX Manuel d'utilisation et d'entretien

Motorline professional

Motorline professional JAG400 Manuel d'utilisation et d'entretien

Motorline professional

Motorline professional MC52 Mode d’emploi

Motorline professional

Motorline professional MC50SC Mode d’emploi

Motorline professional

Motorline professional TELICA Manuel d'utilisation et d'entretien

Motorline professional

Motorline professional J400 Manuel d'utilisation et d'entretien

Motorline professional

Motorline professional KVM205 Mode d’emploi

Motorline professional

Motorline professional PERGOLA Manuel d'utilisation et d'installation

Manuels ouvre-porte populaires d'autres marques

Elite

Elite CSW200UL Manuel utilisateur

CAME

CAME FROG-PM4 Manuel utilisateur

SOMFY

SOMFY FX230 Manuel utilisateur

Aprimatic

Aprimatic ONDA 500 Manuel utilisateur

Turnstiles

Turnstiles FSW 900 Manuel utilisateur

Erreka

Erreka BUL BL33 Mode d'emploi

Erreka

Erreka VULCAN S Manuel utilisateur

Beninca

Beninca R1-2 WBV Manuel utilisateur

Erreka

Erreka VULCAN D Manuel utilisateur

Beninca

Beninca BOB5024 Manuel utilisateur

AGA

AGA GATEMASTER 900 HD Manuel utilisateur

Chamberlain

Chamberlain MotorLift HC280ML Manuel utilisateur

SOMFY

SOMFY Dexxo RTS Pro Manuel utilisateur

Cardin

Cardin BL Series Manuel utilisateur

Westfalia

Westfalia 85 27 06 Manuel utilisateur

CAME

CAME F500 Manuel utilisateur

Extel

Extel VERA Manuel utilisateur

Comunello Automation

Comunello Automation ABACUS 220 Manuel utilisateur