Morphy Richards Supervac Deluxe Manuel utilisateur
VC734055MUK Rev2
Cordless Vacuum Cleaner
www.morphyrichards.co.uk/blog
For competitions, product hints and tips
and more join us at
Please read and keep these instructions for future use
www.facebook.com/morphyrichardsuk
@loveyourmorphy
CHARGE THE PRODUCT FULLY BEFORE FIRST USE
* Register at www.morphyrichards.co.uk/support
UK and Ireland customers only
VC734055MUK Rev 2.qxp_Instructi n B k 08/03/2017 11:40 Page 1
2
Health and Safety
•WARNING: Whenever the cleaner is in use, due to the risk of
entrapment in rotating parts, keep loose clothing, hair, fingers etc.
away from the brush bar, nozzle and any handheld accessories.
•WARNING: Disconnect from the mains supply and remove the
handheld vacuum cleaner (13) before carrying out any routine
maintenance, such as cleaning any blockages, changing any
filters, accessing the motorised floor brush or removing the
battery.
•This appliance can be used by children aged from 8 years and above
and persons with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, if they have been given supervision
or instruction concerning the use of the appliance in a safe way and
understand the hazards involved.
•Only use the mains adaptor supplied with the unit.
•Children shall not play with the appliance.
•Cleaning and user maintenance shall not be undertaken by children
without supervision.
•If the battery is damaged, do not use or try to charge it. Contact the
helpline on the back page.
•Refer to page 11 for disposal of the product and battery.
Personal safety
• WARNING: Only lift the product by the handles (2 & 4)
and never pick the cleaner up by the motorised floor
brush.
• WARNING: Misuse of the appliance could cause
personal injury.
•To prevent accidental contact with the rotating brush bar,
always remove the motorised floor brush (20) during
maintenance.
•Never use in the presence of explosive liquid or vapours.
•Never pick up inflammable or poisonous liquids such as
petrol, copier toner or other volatile substances. Never
pick up acids, asbestos or asbestos dust.
•Never touch the adaptor, product or cable with wet
hands.
•Unprofessional repairs can be dangerous for users.
•To protect against fire, electric shock and personal injury,
do not immerse cord, mains adaptor or cleaner in water
or other liquid.
•The appliance must never be left running unsupervised.
ocation
•Do not use or keep this product outside.
•Do not store the appliance near hot surfaces eg. ovens or
heating appliances.
Product safety
•This appliance is not intended for liquid/wet pick up.
•Never use the appliance without the filter being installed.
•Never use the appliance to vacuum hot ashes, broken
glass, sharp objects or liquids.
•Never modify the cleaner in any way.
•Use only Morphy Richards spare parts and accessories.
Electrical requirements
•Check that the voltage on the rating plate of the mains
adaptor corresponds with your house electricity supply
which must be A.C. (Alternating Current).
•The battery is not a serviceable item. Remove at the end
of the product’s life for recycling.
The use of any electrical appliance requires the following common sense safety rules.
Please read these instructions carefully before using the product.
VC734055MUK Rev 2.qxp_Instructi n B k 08/03/2017 11:40 Page 2
3
Features
(1) Upright handle On/Off
button
(2) Upright handle
(3) Handheld charging inlet
(4) Handheld vacuum cleaner
handle
(5) Power level indicator lights
(6) Charge indicator
(7) On/Off button
(8) Dust canister release
button
(9) Main filter
(10) Dust canister
(11a) Upright handle connector
hole plug
(11b) Upright handle connector
hole
(12) Upright handle release
buttons
(13) Handheld vacuum cleaner
(14) Battery
(15) Battery release button
(16) Dust canister swing base
release button
(17)
Handheld vacuum cleaner
attachments release buttons
(18) Handheld vacuum cleaner
suction inlet
(19) Dust canister swing base
(20) Motorised floor brush
(21) Mains adaptor connector
(22) Mains adaptor
(23) Crevice tool
(24) Extension tube handheld
connection end
(25) Extension tube
(26) Extension tube
attachments release
buttons
(27) Extension tube suction end
Product overview
2
1
3
7
8
10
16
20
12
14
17
4
10
9
19
1415
25 26
27
24
18
13
22
6
5
23
11a
11b
21
VC734055MUK Rev 2.qxp_Instructi n B k 08/03/2017 11:40 Page 3
4
Multiple functionality
Your vacuum cleaner can easily be configured into several different cleaning modes:
•Two configurations as a vacuum cleaner for floors and carpets.
•Handheld vacuum cleaner which can be carried with you whilst cleaning.
•Extended reach vacuum cleaner for cleaning hard to reach places such as high coving etc.
Floor
vacuum
cleaning
in upright
mode
Handheld
vacuum
cleaning
Extended
reach
cleaning in
handstick
mode
Floor
vacuum
cleaning in
handstick
mode
Set up and charging
13
2
1Fit the battery (14). Hook the lower end of the
battery into the cleaner, then push the top of
the battery firmly until it locks into place.
The battery will not need to be removed again
unless the product reaches the end of its useful
life.
Removal of battery or replacement:
If the battery needs to be removed again, slide
the battery release button (15) towards the
handheld vacuum cleaner handle (4) and pull
from the top end of the battery to remove.
Only use battery number 734005-B for this
product.
In extreme conditions, batteries may be subject
to leakage. If touched, wash skin with hot
soapy warning. Do not try to use or recharge
the battery in this condition.
2Insert the mains adaptor connector (21) into the
handheld vacuum cleaner charging inlet (3).
The connector will only fit one way. Connect
the mains adaptor (22) to the mains supply.
After the adaptor is connected, the charge
indicator (6) will illuminate within a few
seconds.
3When the battery is empty and the product is
put onto charge, one bar of the charge indicator
(6) will illuminate. As the battery charges, the
second bar of the charge indicator will start to
flash and then become steady, then the third
bar will start to flash. When the illumination of
all three bars is steady, the product is fully
charged. A full charge may take 6 hours.
The three bars will stay illuminated for 5
minutes and then extinguish to save power.
If all three bars are flashing, this indicates a
fault, please see ‘Maintenance -
troubleshooting’, page 11.
When fully charged, the mains adaptor may be
switched off and unplugged. If unused, the
batteries will remain charged for many weeks
so there is no need to keep constantly on
charge.
VC734055MUK Rev 2.qxp_Instructi n B k 08/03/2017 11:41 Page 4
5
Assembly in upright mode
1Push the neck of the motorised floor brush (20) into
the handheld vacuum cleaner suction inlet (18) until
it clicks into place.
2
To remove the upright handle connector hole plug
(11a) from the upright handle connector hole (11b),
press the upright handle release buttons (12) and
pull the
plug out
.
3Push the upright handle (2) into the upright handle
connector hole (11b).
1
If floor vacuum cleaning in upright mode, press
the upright handle On/Off button
(1)
.
2
If vacuum cleaning in any other mode, press
the On/Off button
(7)
.
3
Pressing either button
(1 or 7)
will switch the
product on at MAX. A second press will change
the power to MIN, and a third press to OFF. The
product may also be switched off by pressing
the switch continuously for 2 seconds.
When the product is on, one of the two power
level indicator lights
(5)
will illuminate to display
which power setting has been selected and the
charge indicator
(6)
will also illuminate to show
the amount of battery charge remaining.
The MAX setting will produce the best cleaning
results for the majority of cleaning tasks. Using
on MIN power will be sufficient for light
cleaning and will extend the usage time before
the battery needs recharging.
As the battery charge is diminished during use,
the number of illuminated bars on the charge
indicator
(6)
will reduce. When the last bar
starts to flash, the battery charge is close to its
minimum limit. The product will automatically
stop when the battery charge reaches its
minimum limit. The battery must then be
re-charged.
NOTE: Using the product on MAX setting will
give approximately 10 minutes of use. Using
the product on the MIN setting will give up
to 30 minutes of use in the handheld mode.
After approximately 10 minutes of
continuous use on the MAX setting, the
power will automatically reduce to the MIN
setting to prevent over-discharge of the
battery.
Switching on and power settings
2
1
3
1
3
2
VC734055MUK Rev 2.qxp_Instructi n B k 08/03/2017 11:41 Page 5
6
Handheld vacuum cleaning
This function is ideal for cleaning stairs,
curtains and upholstery.
1
To separate the
upright handle
(2) from the
handheld vacuum cleaner (13), press the
upright handle release buttons (12) and pull
the
upright handle
away from the handheld
vacuum cleaner.
2
To enhance the appearance, you may wish
to insert the upright handle connector hole
plug (11a) into the upright handle connector
hole (11b). This is optional.
To remove again, press the upright handle
release buttons (12) and pull the
plug out
.
To attach the motorised floor brush (20) to the
handheld vacuum cleaner (13), push the neck of
the motorised floor brush into the handheld
vacuum cleaner suction inlet (18) until it clicks
into place.
To separate the motorised floor brush from the
handheld vacuum cleaner, press the handheld
vacuum cleaner attachments release buttons (17)
and pull the motorised floor brush away from the
handheld vacuum cleaner.
Using in upright mode
Assemble the product for upright vacuum cleaning
(see ‘Assembly in upright mode’, page 5).
IMPORTANT: When using the motorised floor
brush (20), never keep it in one location on the
floor for an extended period and do not leave the
product running whilst standing still. The rotating
brush bar could cause damage to some floor
coverings if the floor is exposed to the rotating
brush action for a continued period of time.
1
To use the crevice tool (23) in place of the
motorised floor brush (20), align the ridges on
the side of the tool with the grooves inside the
handheld vacuum cleaner suction inlet (18) and
push in place until a click is heard. To remove it
again, press the handheld vacuum cleaner
attachments release buttons (17)
.
3
2
2
1
VC734055MUK Rev 2.qxp_Instructi n B k 08/03/2017 11:41 Page 6
7
7
Using the extension tube for extended reach and handstick mode
For quick and easy vacuum cleaning on floors,
push the motorised floor brush (20) into the
extension tube
suction end (27) and attach the
extension tube (25) to the handheld vacuum
cleaner suction inlet (18).
To remove the motorised floor brush, press
the extension tube attachments release
buttons (26).
To remove the extension tube, press the
handheld vacuum cleaner attachments release
buttons (17).
For extra reach whilst cleaning high areas like
coving etc, use the crevice tool (23) in place of
the motorised floor brush (20).
Using the crevice tool
Crevice tool (23) for awkward places, corners
and behind radiators etc. This tool is also useful
on stairs.
23
VC734055MUK Rev 2.qxp_Instructi n B k 08/03/2017 11:41 Page 7
8
The guarantee may be invalidated if the motor
is damaged due to: using the appliance
without the filter(s) installed; not cleaning the
filter(s); or not replacing a damaged filter.
Your cleaner is manufactured to withstand normal
day-to-day use, but occasionally wipe over with a
damp cloth to help maintain its good looks. Take
care not to get the electrical connections wet.
Abrasive cleaners should not be used.
Empty the dust canister (10) regularly even if it
does not look full, this will maintain the
performance.
To ensure optimum suction and performance, we
recommend that the canister is only filled to the
line shown on the side of the canister.
We recommend cleaning the filter (9) every
time the dust canister (10) is emptied.
The dust canister can be quickly and easily
emptied:
1. Press the dust canister release button (8) and pull
the dust canister (10) away from the handheld
vacuum cleaner (13).
2. Remove the main filter (9) and set aside.
3. Use the dust canister swing base release button
(16) to open the dust canister swing base (19).
4.Empty the dirt from inside the dust canister and
push the swing base closed again.
5.
Remove the foam filter (9a) from the main filter (9).
6. Dust off the foam filter each time the dust
canister is emptied.
Every month, wash the foam filter in luke-warm
water and thoroughly air dry before re-fitting.
IMPORTANT: Do not wash the filter(s) with hot
water or detergents.
IMPORTANT: Do not use heated appliances to
dry the filter(s).
7. Replace the foam filter into the main filter.
8. Replace the main filter into the top of the dust
canister and replace the dust canister into the
handheld vacuum cleaner (13).
IMPORTANT: Never use the product without the
main filter (9) and the foam filter (9a) fitted.
Maintenance
Maintenance - emptying
the dust canister and
cleaning the filters
10
9
9b
99a
VC734055MUK Rev 2.qxp_Instructi n B k 08/03/2017 11:41 Page 8
9
Cleaning the dust canister filter
To maintain suction, the filter in the dust
canister must be cleaned regularly.
Follow steps 1 - 4.
9. Twist the dust canister filter (9b) slightly
anti-clockwise to unlock, then pull away from the
dust canister.
10. Twist part C anti-clockwise, this will unlock the
whole assembly ready for cleaning.
11. Brush clean all parts of the dust canister filter to
remove any hairs or fibres.
12.
When putting the dust canister filter back together
again, align the tabs on part B with the holes on
part A. Of the six mesh windows on part B, one
of them is half size, this window goes to the
bottom (almost in line with the flat edge of part A).
Place part B onto part A and hold in place.
13.Whilst holding part A and part B together. Align
the tabs on the cone section of part A with the
gaps on part C and bring together, then twist
part C clockwise to lock all parts together.
14.To refit the dust canister filter (9b) back into the
dust canister, a lign the arrow graphic on part A
with the unlocked padlock arrow graphic on the
dust canister, then twist so the arrow graphic on
part A aligns with the locked padlock arrow
graphic on the side of the dust canister.
15. Refit the main filter (9) into the dust canister filter
(9b).
16. Refit the dust canister (10) into the handheld
vacuum cleaner (13), ensuring the dust canister
swing base release button (16) faces away from
the handheld vacuum cleaner.
9b
part A part B
part A part B part C
9b
part A part C
part B
part A
10
9b 1613
9
VC734055MUK Rev 2.qxp_Instructi n B k 08/03/2017 11:41 Page 9
10
WARNING: The motorised floorbrush (20) must
be removed before any maintenance
operations.
WARNING: Take care when using tools and
sharp objects.
1.If the motorised floor brush (20) is stalled, eg. by
a foreign object or if used on very deep pile
carpet, the power level indicator lights (5) will
flash. If this happens, switch off, remove the
motorised floor brush and then remove the cause
of the stall. Leave for a few minutes to allow the
floor brush protection to self reset.
2.To clean the motorised floor brush, turn the unit
off, press the handheld vacuum cleaner
attachments release buttons (17) and pull the
motorised floor brush away.
3. Turn the motorised floor brush (20) over to
inspect the rotating brush bar (20c).
4. Using a small flat bladed screwdriver gently turn
the locking button (20a) 1
/8 turn clockwise to
unlock the cover. Remove the cover (20b). Using
the small flat bladed screwdriver underneath the
end of the rotating brush, gently lift the rotating
brush bar (20c) out.
5. Pull-away any hairs or fibres from around the
rotating brush bar. If they are tightly wound
around the brush carefully snip the fibres/hairs
with scissors using the groove in the brush to
assist. Take care not to damage the brush
bristles. Inspect both ends of the brush for hairs
& fibres and remove if necessary. The end cap of
the brush that sits underneath the brush bar
cover (20b) should rotate freely.
6. Before the replacing the motorised floor brush
(20), check to ensure there are no blockages in
the inlet aperture.
7. Replace the rotating brush bar and brush bar
cover in their original position and re-lock the
locking button (20a).
Maintenance - motorised
floor brush
20a
20b
20c
20b
20c
VC734055MUK Rev 2.qxp_Instructi n B k 08/03/2017 11:41 Page 10
Autres manuels pour Supervac Deluxe
2
Table des matières
Autres manuels Morphy Richards Aspirateur
Morphy Richards
Morphy Richards BAGLESS CYLINDER VACUUM CLEANER - REV 2 Manuel utilisateur
Morphy Richards
Morphy Richards Ecovac 70096 Manuel utilisateur
Morphy Richards
Morphy Richards Bagged cylinder Vacuum Manuel utilisateur
Morphy Richards
Morphy Richards Supervac gold Manuel utilisateur
Morphy Richards
Morphy Richards VORTICITY Manuel utilisateur
Morphy Richards
Morphy Richards 73333 Manuel utilisateur
Morphy Richards
Morphy Richards IB73105 Manuel utilisateur
Morphy Richards
Morphy Richards ORB CYCLONE VACUUM CLEANER - REV 3 Manuel utilisateur
Morphy Richards
Morphy Richards ESSENTIALS BAGLESS VACUUM CLEANER - REV 1 Manuel utilisateur
Morphy Richards
Morphy Richards BAGLESS UPRIGHT VACUUM CLEANER - REV 1 Manuel utilisateur
Morphy Richards
Morphy Richards STORM CYCLONIC vacuum cleaner Manuel utilisateur
Morphy Richards
Morphy Richards Bagged cylinder Vacuum Manuel utilisateur
Morphy Richards
Morphy Richards IB73301 Manuel utilisateur
Morphy Richards
Morphy Richards GOBLIN 1400W WET AND DRY CLEANER Manuel utilisateur
Morphy Richards
Morphy Richards GrimeBuster steam cleaner Manuel utilisateur
Morphy Richards
Morphy Richards Orb vacuum cleaner Manuel utilisateur
Morphy Richards
Morphy Richards IB73180 Manuel utilisateur
Morphy Richards
Morphy Richards 732000 Supervac Manuel utilisateur
Morphy Richards
Morphy Richards IB70313 Manuel utilisateur
Morphy Richards
Morphy Richards PremAir Cyclonic 70035 Manuel utilisateur
Morphy Richards
Morphy Richards ORB PETS CYCLONE VACUUM CLEANER - REV 1 Manuel utilisateur
Morphy Richards
Morphy Richards Scoot bagless vacuum cleaner Manuel utilisateur
Morphy Richards
Morphy Richards 70316 Manuel utilisateur
Morphy Richards
Morphy Richards PERFORMAIR CYCLONIC VACUUM CLEANER Manuel utilisateur
