Morphy Richards IB75113 Manuel utilisateur

Heated Bedding

Please read and keep these instructions

getting the best from your

new heated bedding...

Safety

•For your safety, the in-built system in this product will

automatically shut off the power if it reaches a

temperature that is higher than considered comfortable.

It will also shut off automatically if any unsafe situation

should arise.

Washing instructions

•Before washing, detach the switch control and lead

from the blanket.

www.morphyrichards.co.uk

0870 060 2616

1800 409089

S7 Rev 2 21/7/04 1:56 PM Page 1

Important safety

instructions

The use of any electrical appliance

requires the following of basic common

sense safety rules.

Primarily there is danger of injury or death

and secondly the danger of damage to the

appliance. These are indicated in the text by

the following two conventions:

WARNING: Danger to the person!

IMPORTANT: Damage to the appliance!

In addition we offer the following

essential safety advice.

Care instructions

•Examine frequently for any signs of wear

or damage to the blanket, switch or cord.

In case of damage or misuse, please

return immediately following instructions

under servicing.

•During the summer, the blanket can be

used to air the mattress. To store, roll in a

towel and store in a dry place. Avoid

folding or creasing the blanket once

unpacked.

•Do not dry clean the blanket, follow

washing instructions on the label attached

to the blanket and the details that relate

to your blanket.

Personal safety

•Do not use with a helpless person, an

infant or a person insensitive to heat.

•Young children should be instructed on

how to operate the controls safely and

heat settings controlled by a parent or

guardian.

•Do not use a hot water bottle at the same

time as using the blanket.

Product safety

•Ensure the blanket is used in the manner

in which it is intended, either as an

overblanket or underblanket as

appropriate.

•If used on an adjustable bed, check the

blanket or cord cannot become trapped

or rucked.

•Ensure the product is correctly fitted to

the bed, following the instructions in this

booklet.

•Do not insert pins or any sharp objects

into the blanket.

•Do not tuck the heated part of material

under the mattress.

•Do not use if the blanket is wet.

•Avoid pressing creases or folds into the

blanket. Do not switch on if the blanket is

folded, creased or rucked.

•Do not use any lead, switch or cord other

than the one supplied with this blanket.

•Do not coil or lay the lead on the blanket.

•Not intended for medical use in hospitals.

All Morphy Richards heated blankets have been manufactured to the highest European

standards. This product has been comprehensively tested for all known safety situations, so

you can relax in the knowledge that it will provide warmth, comfort and peace of mind.

IMPORTANT INSTRUCTIONS

PLEASE READ CAREFULLY

AND RETAIN FOR

FUTURE USE

S7 Rev 2 21/7/04 1:56 PM Page 2

Electrical requirements

Check that the voltage on the rating

label of your appliance corresponds with

your house electricity supply which must be

A.C. (Alternating Current).

If the socket outlets in your home are not

suitable for the plug supplied with this

appliance, the plug should be removed and

the appropriate one fitted.

WARNING: The plug removed from

the mains lead, if severed, must be

destroyed as a plug with bared flexible

cord is hazardous if engaged into a live

socket outlet.

Should the fuse in the 13 amp plug

require changing, a 3 amp BS1362 fuse

must be fitted.

This appliance does not need to be

earthed. It is a double insulated product.

Before use

Before using this appliance ensure that

the voltage indicated on the product

corresponds with the mains voltage in your

home. If you are in any doubt about your

supply, ask your electrical dealer or local

electricity company.

WARNING: Do not attempt to use

the blanket with controls other than

those supplied with the unit as

referred to on the rating label attached

to the blanket.

Dual control models

Each side of the blanket has a

completely separate element and each is

supplied with its own independant mains

lead. A 13amp plug on each lead is

essential.

Do not connect both flexible cords to

one 13amp plug.

The two leads should preferably be

plugged into individual sockets. However, if

only one socket is accessible, then a dual

adaptor should be used.

WARNING: Only the electric blanket

should be connected to the dual

adaptor. If you are unsure, please

contact a qualified engineer.

It is quite normal for the switch to

become warm as the components encased

are part of the protection circuit.

Safeguard overheat

protection system

Activation

The system will remain dormant

indefinitely as long as the blanket is

operating in the normal temperature range.

If for any reason the blanket is operated in

an abnormal situation or condition which

would otherwise have induced a rapid

temperature rise high enough to constitute a

hazard, the OVERHEAT SYSTEM should

intervene by cutting off the supply current

before the temperature reaches the point at

which damage may occur.

Action in case of activation

In the event of the OVERHEAT SYSTEM

operating, the blanket will cease to function

and must be returned to the service

department address given in this leaflet.

WARNING: No attempt should be

made to repair the blanket or have it

repaired locally and the switch

supplied must never be replaced other

than by the manufacturers since the

specialised components are not

generally available.

A charge will be made for this service

but remember that the alternative would

have been a damaged blanket and bedding.

The fact that this blanket incorporates

the overheat system does not absolve the

user from observing these instructions.

S7 Rev 2 21/7/04 1:56 PM Page 3

Underblanket without

tie tapes

•Use only as an underblanket and do not

use above the occupant of the bed.

•WARNING: Ensure the blanket is not

folded, rucked or creased. When in

use do not cover with pillows.

Fitting instructions

1Place the blanket directly on the

mattress, with the control switch end at

the head of the bed.

•The blanket must be secured to the

mattress in the following manner. Place

the blanket directly on the mattress and

ensure that a space of 10-15cm (4-6

inches) is left between the bottom edge

of the blanket and mattress (see diagram

A).

Mattress covers with

elasticated corner tapes

1Place the mattress cover directly on the

mattress with the control switch end at

the head of the bed.

2Turn the elastic corners underneath the

mattress to secure in place (see diagram

B).

•Ensure all creases are smoothed out.

10-15 cm

4-6 inches

S7 Rev 2 21/7/04 1:56 PM Page 4

How to use

1Ensure the blanket is fitted to the bed

correctly.

2Plug the power lead into the closest

socket, using an extension lead if

needed to ensure that the lead is not

stretched.

Preheating the bed

1Turn the blanket on by setting one of the

timer off settings ⁄,‹or Â.

2Set the heat setting on the control switch

to maximum heat, the light indicator will

show a red light to indicate that the pre-

heating has been selected. Allow

approximately 10-20 minutes for a light

heat and a further 20-30 minutes for the

blanket to heat the bed thoroughly,

although this time may vary depending

on room temperature.

All night use

1Select the required timer off setting.

2Set the heat setting on the control switch

to the low/minimum heat. This setting

will provide safe and comfortable heat to

sleep on all night.

•This setting will provide safe and

comfortable heat to sleep on all night.

•This setting can be used to air the bed.

WARNING: Always ensure that the

heat setting is moved to the OFF

position when you get up the next day.

Braille markings

•Braille markings are located on the back

of the switch to help identify the

direction of the heat level in the dark, or

if visually impaired.

•The highest heat level

pre-heat is identified by 3 raised nodules

mid level by 2 raised nodules

low level (all night) by 1 raised nodule

Switch control Features

⁄Illuminated heat setting light

(Red for preheat level, green for safe

all night level)

¤Variable heat levels

(For exact heat preference)

‹Braille markings

(located on the back of the switch)

›Timer off

(Automatically turns the heat off after

the number of hours selected)

ﬁTimer on

(Automatically turns the heat on in 3

hours time)

ﬂOff setting

‡Sleep button (Turns the heat on for

30 minutes to help you drop off to

sleep or to air the bed in the morning)

·Power ‘on’ indicator light

‹

⁄

ﬁ

›

‡

ﬂ

S7 Rev 2 21/7/04 1:56 PM Page 5

Sleep button

1Press this button to turn the heat on for

30 minutes. The light will flash to

indicate that the sleep function has been

selected, and it will automatically turn off

after 30 minutes. This is ideal to help you

get back to sleep if you wake in the night

and are cold, or to air the bed in the

morning.

•Note: This function will only operate if

the blanket is switched to a timer on or

off setting, not if the switch is at the OFF

position.

Setting the timer

1To program the heat to turn on in 3

hours time, move the timer button to the

unfilled 3 symbol . This allows you to

come home to a warm bed. Ensure that

the heat setting is set to pre-heat,

maximum heat level.

2When you get into bed, change the heat

level to low, all night level. The heat will

turn off after 9 hours, unless an

alternative timer off setting is selected.

3To program the heat to turn off after a

set number of hours, move the timer

button to the filled hour symbol ⁄‹Â.

For example, to set to turn heat off after

1 hour, move the button to the 1 ⁄.

Ensure that the heat setting is set to a

low, all night level.

Note: The timer function will switch the

blanket off after the selected time.

Timer must be switched to the OFF

position before setting a further

time.

Washing instructions

WARNING: Before washing ensure

that you detach all the controls from

the blanket.

•Do NOT dry clean -

•Do NOT iron -

1Measure the blanket so it can be

stretched back to its original size whilst

wet.

2Only use in a washing machine with a

drum large enough to take the blanket

without forcing it in.

Machine washing

1Unplug the blanket from the power

socket.

2Disconnect the control switch and cord

from the blanket by lifting the locking

lever over the raised button and pull

apart. C

3Wash on the WOOL setting at 40˚C.

4Gently stretch the blanket back to it’s

original shape and size before line drying

WITHOUT using clothes pegs on the

wired area of the blanket. (See

instructions for tumble drying overleaf).

Hand washing

1Unplug the blanket from the power

socket.

2Disconnect the control switch and cord

from the blanket by lifting the locking

lever over the raised button and pull

apart. C

3Use a mild washing liquid or detergent

and lukewarm water.

4Immerse the blanket in the water and

allow to soak for 5-10 minutes.

5Squeeze the soapy water through the

fabric.

6Rinse the blanket thoroughly in cool

water, gently squeezing the fabric.

WARNING: Do not wring dry.

7Gently stretch the blanket back to its

original shape and size before line drying

WITHOUT using clothes pegs on the

wired area of the blanket.

40º

S7 Rev 2 21/7/04 1:56 PM Page 6

Tumble drying

1Controls must be removed.

2Gently stretch the blanket back to its

original shape before drying.

3Tumble dry on the low heat setting,

following the manufacturers instructions

for the required drying time.

Servicing

Examine the blanket and cord frequently

for signs of wear or damage. In the case of

damage, or for routine inspection every 2

years, return the blanket to the service

department (see address below).

A standard service charge (inclusive of

packing and return carriage) is made for

routine inspection where no repair is found

to be necessary.

If the blanket fails to operate, check the

following before returning:

1Ensure that the plug and socket have not

become disconnected.

2Check that the supply plug is correctly

connected to the flex.

3Check the supply fuse and the 3 amp

plug fuse if applicable.

Service department

Waterside Mill

Langham Street

Rosegrove

Burnley

BB12 6AL

Republic of Ireland c/o

Dimpco Ltd

Airport Road

Cloghran

Co. Dublin

Helpline

Should you need any advice on using

the product, please contact our helpline,

8:30 - 5:00 Mon - Thurs

8:30 - 4:00 Fri

Tel: 0870 060 2616

0870 060 2616

1800 409089

S7 Rev 2 21/7/04 1:56 PM Page 7

I1020M UK Rev 2 0604

Service and Aftersales Department,

Waterside Mill, Langham Street,

Rosegrove, Burnley, BB12 6AL

Helpline (office hours)

UK 0870 060 2616

Republic of Ireland 1800 409089

Morphy Richards products are intended for

household use only

Morphy Richards has a policy of continuous

improvement in product quality and design.

The Company, therefore, reserves the right

to change the specification of its models at

any time.

Your three year

guarantee

It is important to retain the retailers

receipt as proof of purchase. Staple your

receipt to this back cover for future

reference.

Please quote the following information if

the product develops a fault. These numbers

can be found on the rating label attached to

the blanket.

Model no. Serial no.

All Morphy Richards products are

individually tested before leaving the factory.

In the unlikely event of any appliance proving

to be faulty within 28 days of purchase it

should be returned to the place of purchase

for it to be replaced.

If the fault develops after 28 days and

within 36 months of original purchase, you

should contact the Helpline number quoting

Model number and Serial number on the

product, or write to Morphy Richards at the

address shown.

You will be asked to return the product (in

secure, adequate packaging) to the address

below along with a copy of proof of

purchase.

Subject to the exclusions set out below

(see Exclusions) the faulty appliance will then

be repaired or replaced and dispatched

usually within 28 working days of receipt.

If for any reason this item is replaced

during the 3 year guarantee period, the

guarantee on the new item will be calculated

from original purchase date. Therefore it is

vital to retain your original till receipt or

invoice to indicate the date of initial

purchase.

To qualify for the 3 year guarantee the

appliance must have been used according to

the manufacturers instructions.

EXCLUSIONS

Morphy Richards shall not be liable to

replace or repair the goods under the terms

of the guarantee where:

1The fault has been caused or is

attributable to accidental use, misuse,

negligent use or used contrary to the

manufacturers recommendations or where

the fault has been caused by power

surges or damage caused in transit.

2The appliance has been used on a voltage

supply other than that stamped on the

products.

3Repairs have been attempted by persons

other than our service staff (or authorised

dealer).

4Where the appliance has been used for

hire purposes or non domestic use.

5Morphy Richards are not liable to carry

out any type of servicing work, under the

guarantee.

This guarantee does not confer any rights

other than those expressly set out above and

does not cover any claims for consequential

loss or damage. This guarantee is offered as

an additional benefit and does not affect your

statutory rights as a consumer.

•This guarantee is valid in the UK and

Ireland only.

S7 Rev 2 21/7/04 1:56 PM Page 8

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Morphy Richards Chauffage

Morphy Richards

Morphy Richards IB75101 Manuel utilisateur

Morphy Richards

Morphy Richards IB75400 Manuel utilisateur

Morphy Richards

Morphy Richards IB75100 Manuel utilisateur

Morphy Richards

Morphy Richards IB75300 Manuel utilisateur

Morphy Richards

Morphy Richards IB75237 Manuel utilisateur

Morphy Richards

Morphy Richards IB75401 Manuel utilisateur

Morphy Richards

Morphy Richards IB75219 Manuel utilisateur

Morphy Richards

Morphy Richards IB75248 Manuel utilisateur

Morphy Richards

Morphy Richards EB75283MUK Manuel utilisateur

Morphy Richards

Morphy Richards EB75255MUK Manuel utilisateur

Morphy Richards

Morphy Richards IB75402 Manuel utilisateur

Manuels Chauffage populaires d'autres marques

oventrop

oventrop Regucor Series Manuel utilisateur

Blaze King

Blaze King CLARITY CL2118.IPI.1 Manuel utilisateur

ELMEKO

ELMEKO ML 150 Manuel utilisateur

BN Thermic

BN Thermic 830T Manuel utilisateur

KING

KING K Series Mode d’emploi

Empire Comfort Systems

Empire Comfort Systems RH-50-5 Guide de démarrage rapide

Well Straler

Well Straler RC-16B Manuel utilisateur

EUROM

EUROM 333299 Manuel utilisateur

Heylo

Heylo K 170 Manuel utilisateur

Eterna

Eterna TR70W Manuel utilisateur

Clarke

Clarke GRH15 Mode d’emploi

IRSAP

IRSAP The Radiator Company Ovali Manuel utilisateur

Empire Heating Systems

Empire Heating Systems WCC65 Manuel utilisateur

Wetekom

Wetekom 92 86 43 Manuel utilisateur

Desa

Desa SPC170-F Manuel utilisateur

Watlow

Watlow Watrod Electric Tubular Heaters Manuel utilisateur

Haverland

Haverland ECO-DRY GPS Series Manuel de la liste des pièces

Stelpro

Stelpro ASILVC2060 Series Manuel utilisateur