Monoprice MS-03 Manuel utilisateur

NOTE: Read entire instruction sheet before you start installtion and assembly.

WARNING

• Do not begin to installation of the product on you have read and understand the

instructions and warnings contained in this Installation Sheet. If you have any question

regarding any of the instruction or warning, Please contact your local distributor.

• Make sure that the supporting surface will safely support the combined load of the

equipment and all attached hardware and components.

• Never exceed the Maximum Load Capacity.

• Always use an assistant or mechanical lifting equipment to safely lift and position

equipment.

• Tighten screws firmly, but do not over tighten. Over tightening can damage the items,

greatly reducing their holding power.

• This products intended for indoor use only. Use of this product outdoors could lead to

product failure and personal injury.

Component Checklist

IMPORTANT: Ensure you have received all parts against the component checklist prior to installing. If any parts

are missing or faulty, telephone the special franchiser for a placement.

Package M

Speaker Stand Base

(x1)

Tools required

Phillips Head Screw driver(200mm length exclude the handle)

M6 Socket and Wrench

M5x16

M-B

(x1)M5x12

M-A

(x4) Steel Isolation Spike (x4)

M-C

Rubber Footpad (x4)

M-D

M6 Nut (x4)

M-E

Self Adhesive Pad (x4)

M-F

Pillar

(x1)

Mounting P a 1

l te (x1) Mounting 2

Plate (x1) Plastic Cover

(x1)

Attachment of footpad to metal base

1b. For carpet placement

Place speaker stand base(A) upside down on ground and thread steel isolation spikes (M-C) through M6 nut

(M-E)in the 4 holes.Adjust the height of speaker stand base by screwing the nut as request .as shown in fig.1.2.

1a. For hard floor placement

Place speaker stand base(A) upside down on ground and paste rubber footpad on the 4 holes, as shown in fig.1.1

2Attachment of speaker stand base to pillar

•Insert pillar (B) from the bottom of speaker stand base and turn pillar to align to mounting hole, Secure them with

M5x12(M-A)screw. Then tighten the screw ,but do not over tighten.

•Turn the base over ( isolation spikes can scratch floors, use caution) Please ensure cable outlet on top of pole is

in line with channel in base.as shown in fig.2.1.

Mounting plastic cover

Cover the speaker stand with the plastic cover (E) through pillar. as shown in fig.3.1

fig.1.1

M-D

fig.1.2

M-C

M-E

M-A

fig.2.1

fig.3.1

4Mounting plate

Attach mounting plate to the top of pillar with the appropriate combination of screw(M-B). Make sure mounting

plate is level. Then tighten the screw ,but do not over tighten. as shown in fig. 4.1 and fig.4.2.

5Mounting speaker

Remove the backing paper so the adhesive is exposed. Then place the adhesive pad on the mounting plate.

Peel the other side of the backing paper on the mounting Self adhesive pad . Then place the speaker on the

center of the mounting plate. as shown in fig.5.1 and fig.5.2.

M-B

fig.4.1

fig.4.2

fig.5.1

fig.5.2

Maintenance

Once you have mounted the stand and the speaker, check that they are sufficiently secure and safe to use.

You should check whether screws are fixed well each two months. If you have any doubts regarding the

installation, please consult our retailer or service department for detail.

M-F

Autres manuels Monoprice Intervenants

Monoprice

Monoprice 34197 Manuel utilisateur

Monoprice

Monoprice PID 11427 Manuel utilisateur

Monoprice

Monoprice 13193 Manuel utilisateur

Monoprice

Monoprice 14446 Manuel utilisateur

Monoprice

Monoprice 14889 Manuel utilisateur

Monoprice

Monoprice 7495 Manuel utilisateur

Monoprice

Monoprice 33828 Manuel utilisateur

Monoprice

Monoprice 43247 Manuel utilisateur

Monoprice

Monoprice 605650 Manuel utilisateur

Monoprice

Monoprice Harmony XL Manuel utilisateur

Monoprice

Monoprice PID 13271 Manuel utilisateur

Monoprice

Monoprice 35521 Manuel utilisateur

Monoprice

Monoprice PID11180 Manuel utilisateur

Monoprice

Monoprice 24760 Manuel utilisateur

Monoprice

Monoprice 16220 Manuel utilisateur

Monoprice

Monoprice DT-4BT Manuel utilisateur

Monoprice

Monoprice 11948 Manuel utilisateur

Monoprice

Monoprice 43257 Manuel utilisateur

Monoprice

Monoprice SB-200 Manuel utilisateur

Monoprice

Monoprice HarmonyMini Manuel utilisateur

Monoprice

Monoprice 13264 Manuel utilisateur

Monoprice

Monoprice DT-3 Manuel utilisateur

Monoprice

Monoprice 36377 Manuel utilisateur

Monoprice

Monoprice 14890 Manuel utilisateur

Manuels Intervenants populaires d'autres marques

argon audio

argon audio IE20 Manuel utilisateur

Denon

Denon SC-N7 Manuel utilisateur

Gemline

Gemline Ace 3952 Manuel utilisateur

Focal

Focal ON WALL 300 Mode d’emploi

HEADRUSH

HEADRUSH Maximus HRSP 5024 Manuel utilisateur

SoundLogic

SoundLogic BCCS-6/6395 Manuel utilisateur

Peavey

Peavey DTH 218 Manuel utilisateur

Avantree

Avantree Pluto Air Manuel utilisateur

Morel

Morel Integra Series INTEGRA OVATION 4 Manuel utilisateur

Oppo

Oppo SONICA Manuel utilisateur

Bose

Bose SoundLink Wireless Music System Manuel utilisateur

Rocksteady

Rocksteady Stadium Manuel utilisateur

Bowers & Wilkins

Bowers & Wilkins 4 Manuel utilisateur

Sonance

Sonance SONOS OUTDOOR Series Manuel utilisateur

Electro-Voice

Electro-Voice EVID FM4.2 Manuel utilisateur

Pioneer

Pioneer XW-HTD630 Manuel utilisateur

Onn

Onn BWA16AA002 Manuel utilisateur

HP GL313AA - USB Speakers PC Multimedia Manuel utilisateur