Monoprice 18784 Manuel utilisateur

MONOPRICE

Blackbird™ HDMI® Extender Over Cat6, 50m

P/N 18784

User's Manual

CONTENTS

SAFETY WARNINGS AND GUIDELINES.......................................................................................................................................3

INTRODUCTION................................................................................................................................................................................................4

FEATURES..............................................................................................................................................................................................................4

CUSTOMER SERVICE....................................................................................................................................................................................5

PACKAGE CONTENTS.................................................................................................................................................................................5

PRODUCT OVERVIEW.................................................................................................................................................................................6

Transmitter ....................................................................................................................................................................................................6

Receiver............................................................................................................................................................................................................ 7

INSTALLATION..................................................................................................................................................................................................8

SETTING THE EQ SWITCH......................................................................................................................................................................10

SPECIFICATIONS.............................................................................................................................................................................................11

REGULATORY COMPLIANCE..............................................................................................................................................................12

Notice for FCC ..........................................................................................................................................................................................12

Notice for Industry Canada...........................................................................................................................................................13

SAFETY WARNINGS AND GUIDELINES

Please read this entire manual before using this device, paying extra attention to these

safety warnings and guidelines. Please keep this manual in a safe place for future reference.

This device is intended for indoor use only.

Do not expose this device to water or moisture of any kind. Do not place drinks or

other containers with moisture on or near the device. If moisture does get in or on

the device, immediately unplug it from the power outlet and allow it to fully dry

before reapplying power.

Do not touch the device, the power cord, or any other connected cables with wet

hands.

Do not expose this device to excessively high temperatures. Do not place it in, on,

or near heat sources, such as a fireplace, stove, radiator, etc. Do not leave it in direct

sunlight.

Prior to operation, check the unit and power cord for physical damage. Do not use if

physical damage has occurred.

Before plugging the unit into a power outlet, ensure that the outlet provides the

same type and level of power required by the device.

Unplug this device from the power source when not in use.

Never unplug the unit by pulling on the power cord. Always grasp the connector

head or adapter body.

Ensure that power is turned off and disconnected before making any electrical

connections.

Clean using a soft, dry cloth only. Do not use chemical cleaners, solvents, or

detergents. For stubborn deposits, moisten the cloth with warm water.

This device has no user serviceable parts. Do not attempt to open, service, or

modify this device.

Keep away from corrosive materials.

INTRODUCTION

Thank you for purchasing this Blackbird™ HDMI® Extender! This extender allows you to

transmit a 1080p video signal to distances up to 164 feet over a single Cat6 UTP cable. It

features a 4.95Gbps bandwidth and includes an HDMI pass-through port, which allows for

cascading. Display EDID information can be set to either the display connected to the

receiver or the display connected to the pass-through port on the transmitter. It supports

Deep Color up to 12-bits/channel and multichannel high-definition audio streams, such as

DTS-HD Master Audio™ and Dolby TrueHD™. This extender also features a bidirectional IR

transmitter and receiver, which allows you to control your source device from the remote

location or your remote display from the source location.

FEATURES

Supports HDMI® video resolutions up to 1920 x 1080p @ 60Hz

4.95 Gbps bandwidth

Can transmit signals to distances up to 164 feet (50m) over a single Cat6 UTP cable

EDID information can be obtained from the display connected to either the receiver

or to the transmitter's pass-through port

Includes a bidirectional IR extender for control of source devices from the remote

location or the remote display from the source location

Features a pass-through HDMI port on the transmitter for connecting a second

display or another extender transmitter

Supports HDCP version 1.4

CUSTOMER SERVICE

The Monoprice Customer Service department is dedicated to ensuring that your ordering,

purchasing, and delivery experience is second to none. If you have any problem with your

order, please give us an opportunity to make it right. You can contact a Monoprice

Customer Service representative through the Live Chat link on our website

www.monoprice.com during normal business hours (Mon-Fri: 5am-7pm PT, Sat-Sun: 9am-

6pm PT) or via email at [email protected]

PACKAGE CONTENTS

Please take an inventory of the package contents to ensure you have all the items listed

below. If anything is missing or damaged, please contact Monoprice Customer Service for a

replacement.

1x HDMI® extender transmitter

1x HDMI extender receiver

1x Wideband IR transmitter (blaster)

1x Wideband IR receiver

2x 5 VDC, 1A AC power adapters

1x User's manual

PRODUCT OVERVIEW

Transmitter

1. IR Out: Connection for the IR transmitter or IR receiver.

2. EDID: Switch to allow EDID information to be obtained from either the display

connected to the receiver or the display connected to the pass-through port on the

transmitter.

3. Power LED: Illuminates when power is applied.

4. Link LED: Illuminates when a valid link between the transmitter and receiver exists.

5. HDMI® In: Connection for the HDMI source device.

6. HDMI Out: Pass-through connector for connecting a display or cascading another

extender transmitter.

7. CAT: Connection for the Cat6 Ethernet cable.

8. DC5V: Connection for the AC power adapter.

Receiver

1. IR In: Connection for the IR receiver or transmitter.

2. Power LED: Illuminates when power is applied.

3. Link LED: Illuminates when a valid link between the transmitter and receiver exists.

4. EQ: Adjusts the signal strength to eliminate video noise or anomalies.

5. HDMI Out: Connection for the video display.

6. CAT: Connection for the Cat6 Ethernet cable.

7. DC5V: Connection for the AC power adapter.

INSTALLATION

Perform the following steps to install the extender:

1. Ensure that all equipment to be connected is powered off and unplugged from its

power source.

2. Place the extender receiver at the remote location.

3. Using a High Speed HDMI® Cable (not included), plug one end into the HDMI input

on your display, then plug the other end into the HDMI Out port on the receiver.

4. (Optional) Plug either the IR receiver or IR transmitter into the IR In port on the

receiver. If you want to control the source device from the remote location, use the

IR receiver. If you want to control the remote display from the source location, use

the IR transmitter instead.

5. If using the IR receiver, position the "bulb" where it can receive signals from your

remote control. If using the IR transmitter, position the "bulb" where it can transmit

signals to the IR receiver on your display.

6. Route a Cat6 Ethernet cable (not included) from the source location to the remote

location. This cable can be no longer than 164 feet (50 meters) and must be rated for

in-wall use if being routed inside or through the walls.

7. Connect one end of the Cat6 Ethernet cable to the CAT port on the receiver.

8. Place the extender transmitter at the source location.

9. Connect one end of the Cat6 Ethernet cable to the CAT port on the transmitter.

10. (Optional) Using a High Speed HDMI Cable (not included), plug one end into the

HDMI® input on a display at the source location or into the HDMI input of another

extender or other HDMI device. Plug the other end into the HDMI Out port on the

transmitter.

11. Using a High Speed HDMI Cable (not included), plug one end into the HDMI In port

on the transmitter, then plug the other end into the HDMI output of your HDMI

source device (e.g., DVD or Blu-ray Disc™ player).

12. (Optional) Plug either the IR receiver or IR transmitter into the IR Out port on the

transmitter. If you want to control the source device from the remote location, use

the IR transmitter. If you want to control the remote display from the source

location, use the IR receiver instead.

13. If using the IR transmitter, position the "bulb" where it can transmit signals to the IR

receiver on your source device. If using the IR receiver, position the "bulb" where it

can receive signals from your remote control.

14. Slide the EDID switch on the transmitter to the Left position if you want to obtain

EDID information from the remote display. If you want to obtain EDID information

from a display connected to the pass-through HDMI connector on the transmitter,

slide the switch to the Right position instead.

15. Plug the DC barrel connector on one of the AC power adapters into the DC5V jack

on the receiver, then plug the adapter into a nearby AC power outlet. Verify that

the Power LED illuminates.

16. Plug the DC barrel connector on the other AC power adapters into the DC5V jack on

the transmitter, then plug the adapter into a nearby AC power outlet. Verify that

the Power LED illuminates.

17. Verify that the Link LED illuminates. It may take several minutes before a handshake

is achieved.

18. Plug in and power on all connected equipment. Start video playback on your HDMI®

source device.

19. Verify that video is visible on the remote display

20. If you are using the IR extender, verify that you can control the source device from

the remote location or the remote display from the source location.

Congratulations, your HDMI extender is properly installed!

SETTING THE EQ SWITCH

If you see flickering, blinking, or other video anomalies on the remote display, use the EQ

Switches to increase the signal strength. Start with the EQ set to 0, then increase it until

the video anomalies are no longer present. The positions for each of the three DIP switches

for each number value and the approximate HDMI cable length range can be found in the

following table.

EQ Switch Positions

Approximate Cat6 Cable Length

up to 49 feet (15 meters)

49 ~ 98 feet (15 ~ 30 meters)

98 ~ 131 feet (30 ~ 40 meters)

131 ~ 164 feet (40 ~ 50 meters)

Table des matières

Autres manuels Monoprice Extenseur

Monoprice

Monoprice Blackbird Pro WiHD 39625 Manuel utilisateur

Monoprice

Monoprice 34898 Manuel utilisateur

Monoprice

Monoprice Blackbird Pro WiHD 16049 Manuel utilisateur

Monoprice

Monoprice blackbird 24181 Manuel utilisateur

Monoprice

Monoprice 21792 Manuel utilisateur

Monoprice

Monoprice MIR-500 Manuel utilisateur

Monoprice

Monoprice 10224 Manuel utilisateur

Monoprice

Monoprice Audio-E Local Manuel utilisateur

Monoprice

Monoprice Blackbird 8159 Manuel utilisateur

Monoprice

Monoprice 21793 Manuel utilisateur

Monoprice

Monoprice Blackbird 43959 Manuel d'utilisation

Monoprice

Monoprice BLACKBIRD 44570 Manuel utilisateur

Monoprice

Monoprice BitPath AV 16227 Manuel utilisateur

Monoprice

Monoprice RS232-L Manuel utilisateur

Monoprice

Monoprice 41097 Manuel utilisateur

Monoprice

Monoprice 24281 Manuel utilisateur

Monoprice

Monoprice 10247 Manuel utilisateur

Monoprice

Monoprice 31055 Manuel utilisateur

Monoprice

Monoprice Blackbird 30915 Manuel utilisateur

Monoprice

Monoprice KVM-LII Manuel utilisateur

Monoprice

Monoprice MIR-300 Manuel utilisateur

Monoprice

Monoprice 27841 Manuel utilisateur

Monoprice

Monoprice Blackbird 4K Pro HDBaseT Manuel utilisateur

Monoprice

Monoprice SE535LTD Manuel utilisateur

Manuels Extenseur populaires d'autres marques

SY HDBT-60T Manuel utilisateur

Appsys ProAudio

Appsys ProAudio ADX-16 Manuel utilisateur

Atlona

Atlona RS232 Manuel utilisateur

IDK

IDK OPF-TH1000-A Manuel utilisateur

Enable-IT

Enable-IT 824WP Manuel utilisateur

Worx

Worx Landroid RadioLink WA0864 Fiche technique

TP-Link

TP-Link TL-WA730RE Manuel utilisateur

Camplex

Camplex CMX-HDMI-SFPL Manuel utilisateur

SC&T

SC&T HE03-4K Manuel utilisateur

Marmitek

Marmitek MegaView70 Manuel utilisateur

Samsung

Samsung SCS-26UC4 Manuel utilisateur

Foxun

Foxun SX-GES24 Manuel utilisateur

MuxLab

MuxLab 500771 Manuel utilisateur

foxunhd

foxunhd SX-AEX01 Manuel utilisateur

TERK Technologies

TERK Technologies LFIRX2 Manuel utilisateur

Devolo

Devolo Audio Extender Manuel

Edimax

Edimax EW-7438RPn V2 Manuel utilisateur

Shinybow USA

Shinybow USA SB-6335T5 Manuel utilisateur