Monarch 939i Manuel utilisateur
Monarch
939i
Intelligent
Keyboard
®
™
TC0939IOI Rev. AG 4/08 ©2007 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. All rights reserved.
Operating
Instructions
Operating
Instructions
Each product and program carries a respective written warranty, the only warranty
on which the customer can rely. Paxar reserves the right to make changes in the
product, the programs, and their availability at any time and without notice.
Although Paxar has made every effort to provide complete and accurate information
in this manual, Paxar shall not be liable for any omissions or inaccuracies. Any
update will be incorporated in a later edition of this manual.
ã2004 Paxar Americas, Inc. a subsidiary of Avery Dennison Corp. All rights
reserved. No part of this publication may be reproduced, transmitted, stored in a
retrieval system, or translated into any language in any form by any means, without
the prior written permission of Paxar Americas, Inc.
WARNING
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instruction manual, may cause harmful
interference to local radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference, in which case the user
will be required to correct the interference at his own expense.
CANADIAN D.O.C. WARNING
This digital apparatus does not exceed the Class A limits for radio noise
emissions from digital apparatus set out in the Radio Interference Regulations
of the Canadian Department of Communications.
Le présent appareil numérique n’émet pas de bruits radioélectriques
dépassant les limites applicables aux appareils numériques de la classe A
prescrites dans le Réglement sur le brouillage radioélectrique édicte par le
ministère des Communications du Canada.
Trademarks
Monarchâ, 938, 939, 939i, 9416®, 9416® XL®, 9825®, 9855®, and 9860 are
trademarks of Paxar Americas, Inc.
Avery Dennisonâis a trademark of Avery Dennison Corporation.
UFST, Monotype, the Monotype logo, and CG Triumvirate are trademarks of
Monotype Imaging, Inc.
Avery Dennison Printer Systems Division
170 Monarch Lane
Miamisburg, OH 45342
TABLE OF CONTENTS
GETTING STARTED ................................................... 1-1
Overview...................................................... 1-1
Power-Up Modes ............................................... 1-2
About This Manual .............................................. 1-2
About Scripts .................................................. 1-3
Unpacking the Keyboard.......................................... 1-3
Connecting the Cables to a 9416 XL Printer...........................1-4
Connecting the Cables to a 9825 Printer .............................1-5
Connecting the Cables to a 9855/9860 Printer .........................1-6
Connecting the Scanner’s Cables...................................1-7
Using the Keyboard ............................................. 1-8
Control Keys............................................ 1-9
SETTING BATCH OPTIONS ............................................. 2-1
Setting Prompts and Defaults ......................................2-2
Non-Knife Setup ......................................... 2-5
ENTERING BATCH DATA ............................................... 3-1
Entering a Batch ................................................ 3-2
Printing Tags Without Cutting ...............................3-7
Using Print Multiple with Inc/Dec Fields .......................3-8
Examples .............................................. 3-8
TROUBLESHOOTING .................................................. 4-1
Table of Contents i
SPECIFICATIONS & ACCESSORIES ...................................... A-1
Accessories & Options ........................................... A-1
Flat Surface Mount....................................... A-2
Wall Mount ............................................. A-3
CHARACTER SETS.................................................... B-1
Supported Symbol Sets and Code Pages ............................B-1
Internal (Standard and Reduced Font)........................B-2
Bold .................................................. B-3
ANSI.................................................. B-4
Code Page 437 ......................................... B-5
Code Page 850 ......................................... B-6
CONFIGURING THE SYSTEM ........................................... C-1
Accessing the Keyboard’s Main Menu ..............................C-1
Operating in Script Mode ......................................... C-1
About the Scanner .............................................. C-2
Operating the Scanner....................................C-2
Troubleshooting the Scanner ...............................C-3
Cleaning............................................... C-3
Configuring the Scanner.......................................... C-4
Reset to Default Values ...................................C-4
Set the Communications Port Defaults .......................C-5
Set the Minimum Bar Code Width ...........................C-7
ii Table of Contents
GETTING STARTED 1
The Monarch® 939iäkeyboard allows you to easily configure the
printer and enter batch data. The keyboard works with the
Monarch® 9416®, 9416® XL®, 9825®,9855® and 9860äprinters.
This keyboard also works with non-Monarch printers. However, an
auxiliary power supply is required for the keyboard. See Appendix
A, “Specifications and Accessories” for the part number.
This chapter includes information about
¨unpacking the keyboard.
¨connecting the cables.
¨power-up modes.
¨using the keyboard.
Overview
The 939i keyboard is an “intelligent” keyboard that can be
programmed to show user prompts and collect data. Using the
Application Development Kit II (ADK2), an application, or script,
can be written to program the keyboard. Refer to the ADK manual
for more information. Think of the intelligent keyboard like your
PC, where you can enter data using your PC’s keyboard or
connect an optional scanner to scan data.
Withascript,youcan
¨Create prompts for the user to enter data manually or using
a scanner. See Appendix C, “Configuring the System,” for
more information.
¨Use look-up tables, or files, to store data that will be
printed on labels.
¨Perform additional data tracking, data conversion, and data
manipulation.
Getting Started 1-1
Throughout this manual, you see references to the term “script.”
The script is the program that runs on the keyboard to perform a
specific task, such as scanning or collecting data. We offer
custom script writing. Contact your Sales Representative for
information and pricing on custom scripts.
Power-Up Modes
Your 939i keyboard has the ability to operate in “terminal” mode or
in “intelligent” mode (using a custom ADK2 script). Terminal
mode is only available with the 9855 and 9860 printers.
If there is no ADK2 script loaded in the keyboard, the keyboard
operates in terminal mode. You can enter data and configure the
printer. In terminal mode, the keyboard does not access the
intelligent functionality provided by a script.
If an ADK2 script is loaded in the keyboard, the script
automatically runs when the keyboard and printer are turned on.
The prompts you see and what you do are controlled by the script.
About This Manual
This manual is arranged in several sections:
¨Use Chapters 2 through 4 when your keyboard is operating in
terminal mode.
¨Use Appendix A for keyboard specifications.
¨Use Appendix B for the available character sets.
¨Use Appendix C, with information for your System
Administrator on intelligent (script) mode and configuring the
scanner.
The information in this document supersedes information in
previous versions. Check our Web site (www.monarch.com)for
any updates.
1-2 Getting Started
About Scripts
This manual does not cover any specific information about what
may be in your script, because each script is different. Your script
is written based on jobs you need to perform. A script should
contain several basics features:
¨A way to enter and exit the script.
¨A way to enter terminal mode (required for 9860 printer).
¨The prompts for entering the date and time each time you turn
on the printer if required by your script. The date and time are
not saved when the printer/keyboard are turned off.
¨The scanner’s configuration and setup (if you are using a
scanner).
Contact your System Administrator for more information about
these items.
Unpacking the Keyboard
After unpacking the keyboard, look through all packaging material
for parts. Keep the box and packaging material in case the
keyboard ever needs repair.
1. Pull the long, coiled cable out from the bottom of the base.
2. Slide the first loop
inthecableslotas
shown.
Getting Started 1-3
Cable
Slot
Connecting the Cables to a 9416 XL Printer
When using the keyboard with the Monarch® 9416® or 9416®
XL® printer, the keyboard receives power from the auxiliary power
supply (5V).
1. Turn OFF the printer before you connect the keyboard’s cable.
2. Plug the 9-pin coiled keyboard cable into the end of the
adaptor cable.
3. Secure the other end of the adaptor cable to the 9-pin port on
the printer. Tighten the screws on the cables.
4. Connect the power cord to both power supplies.
5. Connect the power supply (24V) to the printer.
6. Connect the auxiliary power supply (5V) to the adaptor cable’s
power connector.
7. Turn ON the printer.
1-4 Getting Started
Adaptor
Cable
Power
Connector
Keyboard’s
PowerSupply
Power
Cords
Printer’s Power
Supply
Keyboardcable
goeshere
Optional
ScannerCable
Connecting the Cables to a 9825 Printer
When using the keyboard with a Monarch® 9825® printer, the
keyboard receives power from the auxiliary power supply.
1. Turn OFF the printer before you connect the keyboard’s cable.
2. Plug the 9-pin coiled keyboard cable into the adaptor cable.
3. Plug the 25-pin serial
cable into the back of
the printer.
4. Tighten the screws on
the cables.
5. Plug the auxiliary
power supply into the
adaptor cable as
shown.
6. Plug the power supply
into an electrical outlet.
7. Turn ON the printer.
On the back of the
printer, press (I) to turn
on and (O) to turn off
the printer.
Getting Started 1-5
Auxiliary
Power
Supply
Keyboardcable
goeshere
Connecting the Cables to a 9855/9860 Printer
When using the keyboard with a Monarch® 9855® or 9860ä
printer, the keyboard receives power from the printer.
1. Turn OFF the printer before you connect the keyboard’s cable.
2. Plug the 9-pin coiled keyboard cable into the back of the
printer.
3. Tighten the screws on the cable to secure the cable to the
printer.
4. Turn ON the printer. On the back of the printer, press (I) to
turn on and (O) to turn off the printer. You will see the
prompts for your job. If a script is not written for your job, the
keyboard displays
PRINT MODE
Ready
See your System Administrator for information about your job.
1-6 Getting Started
Keyboard
CableGoes
Here
ON/OFF
Switch
Table des matières
