Mobi Technologies MOBICAM Digital Manuel utilisateur
70062
Table of Contents
Package Contents 1
Features 2
FCC Regulation 3
Monitor Features & Controls 4
Camera Features & Controls 5
Important Safety Instructions 6
Battery Installation & Set-Up 7
Camera Operation & Installation 8
Monitor Operation & Installation 9
Troubleshooting 12
Warranty 13
Introduction
Congratulations on the purchase of the MobiCam®Digital Wireless Video Moni-
toring System, which incorporates the latest in wireless technology. We are sure
that you will be pleased with the quality and features of this product. We recom-
mend that you read these instructions carefully before use.
The MobiCam®Digital Wireless Video Monitor enables you to transmit picture
and sound wirelessly, which is ideal for many situations such as monitoring
babies, young children, pets, or the elderly. It can also be used for household
security or as an ofce or warehouse surveillance system.
Package Contents...
• 1 x Camera Unit (additional cameras, item # 70063, sold separately)
• 1 x Monitor Unit
• 2 x AC/DC adaptors
• 1 x Li-ion Rechargeable Batteries
• 1 x Instruction Manual
• 1 x Troubleshooting guide
• 1 x AV cable
Note: If you nd any of the above items are missing or need to order replace-
ment parts, please contact the manufacturer or visit www.getmobi.com.
1
Features
• DigiLock™ Wireless with (FHSS) technology for private and secure, noise-free
performance
• No installation needed, ready to use out of the box
• Compact design for easy portability
• Transmission range up to 900 ft. outdoors and 450 ft. indoors
Note: Actual range can vary depending on the environment.
• Automatic Night Vision mode with 30 ft. range for viewing in total darkness
• Extra-wide camera viewing angle lets you see more of the room
• Expandable up to 3 cameras with automatic camera scanning option
• Voice-activated picture & sound (VOX) with Auto Mute allowing better sleep
• Audio-only mode
• Audio/Video output for connection to TV, recorder, or optional Internet Kit
• 8 hr built-in rechargeable Lithium Ion battery in monitor
• Ideal for nursery, home, or ofce.
• Built-in Night Light on camera unit with automatic or manual modes
• 2.4 inch high resolution color TFT LCD display
• LCD screen tilts for versatile viewing
2
FCC Regulation
This equipment has been tested and found to comply with the requirements of
the FCC. These requirements are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment gener-
ates, uses, and can radiate radio frequency energy, and if not installed and used
in accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the affected equipment and the Colour Wire-
less Monitor.
• Connect the equipment into an outlet on a main circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
In order to maintain compliance with FCC, special shielded cables are used
within this equipment. Operation with non-approved equipment or unshielded
cables is likely to result in interference to radio or TV reception. You are advised
that changes and modications made to the equipment without the approval of
manufacturer could void your authority to operate this equipment.
3
Monitor Features & Controls
Monitor Unit Front
1 - 2.4” Color LCD Screen
2 - Volume Control
3 - Brightness Control
4 - Power ON LED Indicator
5 - LCD and Power ON/OFF
6 - AV Output
7 - DC Power input
Monitor Unit Rear
8 - Speaker
9 - Tilt Screen Release
10 - Antenna
11 - Channel Selector/Scan Mode
12 - Battery Door
8
5
2
11
9
6
3
12
7
4
1
10
4
Camera Features & Controls
14
22
17
21
15
18
13
19
16
20
Camera Unit Bottom
19 - Link/Code Key
20 - DC Power Input
21 - Night Light Mode Switch
22 - Voice Activation (VOX)
Switch
Camera Unit Front
13 - Night Light
14 - IR Night Vision LED’s
15 - Lens
16 - Microphone
17 - Light Sensor
18 - Power ON/OFF with LED
5
Important Safety Instructions
Please read this instruction manual before using your MobiCam®Digital Wire-
less Monitor. When using electrical appliances, basic safety precautions should
always be followed. Please keep this information for future reference.
• Periodically examine this product for damage to the cord, housing or other
parts that may result in the risk of re, electric shock or injury. Do not operate
any product with a damaged cord or plug. If your MobiCam®Digital System
malfunctions or is damaged in any manner return it to an authorized service
facility for examination and repair to avoid a hazard.
• Never use transmitter and receiver near water (i.e. bathtub, sink, etc.).
• The AC adaptors are not toys. Please keep units out of reach of children.
• Always use transmitter and receiver where there is adequate ventilation. To
prevent overheating, keep away from heat sources such as radiators, heat reg-
isters, stoves, or other appliances that produce heat.
• Use only a dry cotton cloth to keep the Camera and Monitor units free of dust.
Do no use a dampened cloth, water, or liquid cleaner of any kind.
6
• Remove the battery from the Monitor during long periods of non-use.
• Unplug the AC adaptors from the Monitor and Camera during periods of non
use. To disconnect from the power supply, grip the transformer and pull from
the power socket. Never pull by the cord.
• Replace battery with the same equivalent type. Please dispose of old, defective
batteries in an environmentally friendly manner in accordance with the rel-
evant legislation.
• Only use the Monitoring System with the supplied power adaptors.
Battery Installation & Setup
The MobiCam®Digital Wireless Monitor is designed to be powered by either
batteries or the provided AC/DC adaptor. Reconnect the monitor to the adaptor
whenever possible to maintain battery life. The LED power indicator (4) on the
monitor will be illuminated when the monitor is turned on.
Note: We recommend that you charge the Monitor for at least 8 hours before
operating your Color Wireless Monitor.
Using AC/DC Adaptor
• Check that only the approved Li-ion rechargeable battery is installed in the
monitor.
• Plug the connector of the AC adaptor to the socket on the unit (7 & 20).
• Plug the adaptor into a household electrical socket.
• Switch on the power switch of the unit.
Battery Charge Remaining (when not connected to a charger)
• GREEN = fully charged (4).
• AMBER = low battery, recharge for continuous operation (4).
We recommend that you charge battery for 5-6 hours to fully charge. Battery
will last approximately 4-4.5 hours when unit is constantly on. In VOX mode
unit will last approximately 8-10 hours.
WARNING: The monitor of your MobiCam®Digital Wireless System has a
built-in recharging circuit. Before plugging in either AC adaptors, please make
sure only the approved rechargeable Li-ion batteries (or no batteries) are inside
the battery compartment.
7
Camera Operation & Installation
Power ON/OFF
To turn ON the camera unit, press the ON/OFF button located at the front of the
camera (18) for about 1 second or until back lighting of the switch is turned on.
CAMERA MODES:
Voice Activation Mode (VOX)
Voice Activation (VOX) mode allows your camera to go to sleep when there is
no sound in the room. The monitor will automatically turn on when the camera
detects noise– subject to the preset sound level. This feature allows you to con-
serve battery power.
NOTE: The Monitor will automatically display “NoLink/VOX” on screen if no
signal is received from the Camera.
To Activate slide the VOX switch (22) to the “ON” position on the Camera.
When the sound level reaches the preset level within the surrounding area, the
Camera will begin transmitting the image and sound to the Monitor.
To Deactivate slide the VOX switch (22) to the “OFF” position on the Camera.
The camera will then transmit picture and sound continuously.
Infrared Night Vision Mode (Automatic)
The infrared night vision mode will switch on automatically during darkness
or periods of low light levels. In this mode only monochromatic images will be
displayed on the monitor.
Nightlight Mode
The camera features a handy glowing nightlight around the front edge. To chose
the preferred nightlight setting slide the Nightlight Mode Switch (21) on the
camera bottom to the desired indicator:
ON – The Nightlight will be turned on and remain on continuously.
AUTO – The Nightlight will be set to turn on automatically whenever the cam-
era senses low levels of light. The Nightlight will automatically turn off when
the camera again senses sufcient light in the area.
OFF – The Nightlight will always remain off.
Note: When the nightlight is set to AUTO, the automatic Night Vision light level
feature determines when the nightlight switchs on and off.
8
Autres manuels pour MOBICAM Digital
1
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Mobi Technologies Système de sécurité
Mobi Technologies
Mobi Technologies 70061 Manuel utilisateur
Mobi Technologies
Mobi Technologies 70278 Manuel utilisateur
Mobi Technologies
Mobi Technologies 1 Ch HD Manuel utilisateur
Mobi Technologies
Mobi Technologies MOBICAM AV 70060 Manuel utilisateur
Mobi Technologies
Mobi Technologies MobiCam Digital DXR Manuel utilisateur
Manuels Système de sécurité populaires d'autres marques
EDM
EDM Solution 6+6 Wireless-AE Manuel utilisateur
Highway Safety Group
Highway Safety Group EA401 Manuel utilisateur
Siren
Siren LED GSM Manuel utilisateur
Detection Systems
Detection Systems 7090i Instructions de montage
Se-Kure Controls
Se-Kure Controls MicroMini SK-4841 Manuel utilisateur
Siemens
Siemens FDM273 Manuel utilisateur