3. Click a record icon to select a song to remix.
Remixing Studio
Step 1: Play a Mix
Each song contains 16 audio tracks that are accessible by pressing the Track
buttons located on the two turntable decks.
1. To play an audio track, press and hold down a Track button.
Step 2: Lock and Unlock Sounds
Locking a sound track keeps the sound playing.
1. To lock an audio track, push a Track button and one of the Lock buttons,
(located in the center of either deck) at the same time.
2. To unlock an audio track, push a locked Track button and a Lock button at the
same time.
Step 3: Solo a Track
A solo is when a single track plays while other tracks are muted.
1. To solo a track, press the Track button that you want to solo, then press and
hold the Solo button, the long rectangular button located in between the two
decks.
2. To stop soloing and continue playing the other locked tracks, simply release
the Solo button.
Step 4: Scratch your Mix
The Scratch Rings will scratch either deck’s sounds.
1. Move the Scratch Ring back and forth to create a scratch effect.
Step 5: W.A.R.P. your Mix
Real time warp effects can be enabled with the W.A.R.P. controller joystick.
1. Select an effect by pressing one of the three W.A.R.P. buttons in the top
center of the DM2.
2. Move the W.A.R.P. controller to activate real-time warp effects.
Step 6: Create a Macro
Macro buttons quickly recall a snapshot of your mix settings.
1. To create a Macro, lock some sound tracks.
2. Hold down one of the four Macro buttons on the lower left of the DM2for two
seconds to take a snapshot.
3. Repeat step 2 with other music/sounds for the other three Macro buttons.
4. Press one of the four Macro buttons to switch between Macro settings.
Step 7: Crossfader and Transformer
The Crossfader and Transformer let you do advanced DJ tricks.
1. To change the volume balance between the two turntables, move the
Crossfader slider left and right. With the Crossfader in the center, each
