Mixcder HD601 Manuel utilisateur
User’s Manual
Wireless Headphone
MODEL:HD601
2. Package Contents
3. Product Overview
1. Introduction
Thank you for purchasing the Mixcder HD601 Wireless
Headphone. HD601 has fashionable appearance and
eco-friendly package design. The headphone provides
foldable design for easy storage and carrying. Artificial
protein leather of earmuffs is simulated to human skin
texture, giving you a long-time comfort. Built-in recharge-
able battery provides more music playing and standby
time.
HD601 also can be used both wired and wireless via Wireless
V4.2 to communicate with your Wireless-enabled device till 10
meters range. Its powerful and rich bass speaker brings you
amazing and unprecedented audio enjoyment.
Note: Please read the user’s manual carefully before using,
and keep it properly for future reference.
- Wireless headphone*1
- Micro USB charging cable*1
- 3.5mm audio cable*1
- User’s manual*1
4. Charging the Battery
EN-1
Micro USB Charging Cable 3.5mm Audio Cable
Charging LED
Micro USB interface for charging
Microphone
Next track/V+
Previous track/V-
Power button
3.5mm line-in jack
LED Indicator
EN-2
5-1 Pairing the headphone with a computer
Before pairing the headphone with your computer, please
make sure your computer or laptop has the built-in Wireless
feature. If not, you must purchase a Wireless dongle,
preferably version 2.1 or above.
1. Make sure the headphone is off.
2. Start the Wireless program in the computer.
3. The “Search new device” screen will be displayed.
4. Do not place both devices more than one meter away from
each other.
5. Press and hold the power button on the headphone until it
powers on but don't let go just yet. Continue holding down on
Any power source for
USB use
Micro USB charging cable to the USB Interface for charging
Connect the micro USB charging cable to any power source
and the USB interface located on the side of ear cup for
charging. The headphone LED turns to solid red during
charging. It takes about 2 hours for the first charge and after
charging for as long as 1-1.5 hours. When the battery is fully
charged the LED turns off.
You can also use the Wireless function during charging but
will extend the charging time. If you use the audio cable or
turn the headphone off for charging that will not affect the
charging time.
When the battery is low, the LED flashes red light. At the same
time the headphone also provides a low battery warning tone.
Note: It is strongly recommended fully charging for the first use.
Playtime varies according to volume level and audio content .
5. Pairing with Wireless Devices
EN-3
the power button until you see the LED indicator flashes blue
and red alternately, which means your headphone is in
"pairing mode" waiting to be paired with your device. The
voice prompts "Ready to pair, turn on Bluetooth, pin code is
0000."
6.As soon as the computer system detects the new device
and select “Mixcder HD601". Once successfully paired, the
LED turns to solid blue. You will hear “Pairing completed,
connected”.
5-2 Pairing the headphone with a phone
1. Make sure the headphone is off.
2. Do not place both devices more than one meter away from
each other.
3. Press and hold the power button on the headphone until it
powers on but don't let go just yet. Continue holding
down on the power button until you see the LED indicator
flashes blue and red alternately, which means your headphone
is in "pairing mode"waiting to be paired with your device. The
voice prompts "Ready to pair, turn on Bluetooth, pin code is
0000."
4. Start Wireless function on your phone and search for new
devices.
5.Select the “Mixcder HD601” to pair. Once successfully
paired, the LED turns to solid blue. You will hear “Pairing
completed, connected”.
5-3 Using the NFC Function
1. Activate the NFC function on your mobile phone.
2. Make sure the headphone is off.
3. Press and hold the power button for about 2 seconds to turn
the unit on, the blue LED will start flashing every second.
4. Place your mobile phone to NFC mark position on the
headphone, the product name “Mixcder HD601” will appear
on your mobile phone, press “pairing”.
5. Once successfully paired, the LED turns to solid blue. You
will hear “Pairing completed, connected”.
EN-4
6-1 Making a call
1.Make sure the headphone is pairing to the mobile phone.
Dial through the mobile phone and press the call button on the
phone.
2.To end a call, press the power button once again or also end
the call directly by the phone.
6-2 Answering a call
Make sure the Headphone is pairing with your phone. Please
refer to chapter 5. Pairing with Wireless devices.
1.When a call is incoming. The LED flashes red twice every
second.
2.Press the power button on your headphone or the answer
button on your phone to answer the call. If there is the music
playback, it will pause.
3.To end a call, press the power button once again or also end
the call directly by the phone.
4.As soon as the call is ended, the music will continue to play
automatically.
Note:
The microphone can't work when using as wired headphone.
6. Making and Answering a Call
5-4 Connecting to paired devices
Mixcder HD601 will pair with the final paired device automati-
cally when turning on, and the other paired devices need to be
manually paired again. Because of different systems, Some
computers or laptops may need to be manually paired every
time.
Note: There will be a prompt voice“Ready to pair, turn on
Bluetooth, pin code is 0000” when first pairing.
EN-5
7. Using a Wired Headphone
Using as a wired headphone with a 3.5mm audio cable
The HD601 provides a 3.5mm audio jack located on the side
of ear cup and an included audio cable for wired use.
This allows you to use the audio function with other devices
without having wireless function. When the headphone's
battery is low, you can still enjoy the music without worrying
battery dead.
8. Take Care Your Headphone
-Store the Headphone with power off and in a dry environment.
-If you don’t use the headphone for a long period, charging
the battery every 2 months for 1-2 hours.
-Use a dry cloth for cleaning if needed.
-Avoid dropping the headphone from high places or on
hard surfaces.
-Avoid exposing the headphone to extreme temperature.
(Recommended Storage temperature is -40˚C-80˚C.)
-The headphone is NOT waterproof. Avoid exposing the
headphone to rain or getting liquids into any button port or
other openings.
-Please don’t twist or bend the headphone. This may
cause permanent deformation.
-The built-in battery can’t be disposed in the fire to avoid
explosion.
EN-6
9. Protecting your Hearing
10. Control Instructions
Function Operation
Power on
Pairing with wireless
devices
Press and hold the power button 4 seconds. And
the LED flashes red and sounds “Power off”.
Press and hold the power button 2 seconds. And
the LED flashes blue and sounds “Power on”.
Then flashes blue every second.
Press and hold the power button for about 4 seconds
until the LED flash blue and red alternatively, then
select the “Mixcder HD601” to pair.
Press the Volume Up V+ button
Press the Volume Down V- button
Press the power button
Press the power button
Press and hold the V+ button for 2s
Press and hold the V- button for 2s
Power off
Increase volume
Decrease volume
Play media
Pause/restart media
playback
Skip to next track
Skip to previous track
Answer a call The LED flashes red twice every second and
press the power button to answer the call. Then
the blue LED lights .
Avoid exposing to
liquids and rain
Avoid exposing to
extremely temperature
Avoid dropping
from high places
The Headphone is held close to your ears, so loud sounds
pose a potential hearing risk. It is highly recommended that
setting low volume level before putting on the headphone and
avoiding exposing yourself continuously to high volumes. If
you need to use the headphone for a long period, rest ten
minutes for a half hour using.
EN-7
End a call Press the power button
Bass sound effect Press the power button twice to start bass sound
effect, press the power twice again to return.
11. Troubleshooting
Q: The headphone cannot be turned on.
A: The battery may be flat. Please recharge the battery and try
again. Refer to chapter 4. Charging the Battery.
Q: Why doesn’t the headphone pair with the mobile phone?
A: Please check the followings.
- Check that the headphone is charged and is in pairing mode.
- Make sure that the mobile phone's Wireless function is on.
- Make sure the two devices are in the effective pairing range.
(10 meters).
- Make sure that there is no obstacle between the headphone
and the mobile phone, such as electronic equipment and a
wall.
- Furthermore, you can try restarting the headphone and
pairing it with the mobile phone again.
- Make sure the paired device’s wireless function is turned off.
Q: There is some noise.
A: Wireless is a radio technology, so it is sensitive to obstacles
between the headphone and the pairing device. Please make
sure that there is no obstacle between the two devices and is
within 10 meters.
Note:
-There will be a alert tone when the volume reaches the
minimum or maximum level.
-When you turn the unit on to play the music, it defaults to the
last sound effect .
EN-8
12. Warranty
13. Specifications
The HD601 is covered by a 1-year manufacturer warranty. For
more information, visit: www.mixcder.com/warranty.
Q: I can't hear sound.
A: Please check the followings.
- Try increase the volume.
- Make sure that the Wireless function is on and whether the
two devices are connecting and within 10 meters.
Q: My mobile phone or computer cannot find the headphone.
A: Please check that the headphone is in pairing mode. Refer
to chapter 5. Pairing with Wireless devices. Sometimes when
the headphone is connected too many Wireless devices, it
cannot search and pair effectively. Or your mobile phone and
computer are already connected to many other devices. Try
removing some connections before searching the headphone.
EN-9
Microphone
Spec.
Microphone Unit 4*1.5mm
Omni-directional
-42±3dB
≤2.2KΩ
100Hz-10KHz
Speaker Spec.
Wireless Spec.
Battery Spec.
Directivity
S.P.L
32ΩImpedance
96±3dBS.P.L
＜3%
THD
Impedance
Φ40mm
Speaker diameter
2.402GHz-2.48GHz
Transmission
frequency
20Hz-20,000Hz
Frequency
response
4.2Wireless version
HSP/HFP/A2DP/AVRCPSupport profile
SBC, apt-X, apt-X Low LatencyTransmission Format
Built-in 360mah rechargeable
lithium battery
Battery type
Mixcder HD601Pairing name
Micro USB 5V/1ACharging port
About 20 hours talking/About 20
hours music playing time
Running time
10mWireless distance
Standby time
Charging time
Operating
temperature
More than 1800 hours
About 2 hours
-10˚C-45˚C
-25˚C-60˚C
Storage temperature
Frequency response
1-10VOperating voltage
Note:
- The HD601 supports apt-X Low Latency lossless transmission,
it needs your wireless devices also support apt-X, then you can
share this function.
- Features and technical specifications are subject to change
without notice, we apologize for any inconvenience.
Table des matières
Langues :
Autres manuels Mixcder Casque sans fil
Mixcder
Mixcder E9 Manuel utilisateur
Mixcder
Mixcder E7 Manuel utilisateur
Mixcder
Mixcder HD901 Manuel utilisateur
Mixcder
Mixcder HD901 Manuel utilisateur
Mixcder
Mixcder E9 Manuel utilisateur
Mixcder
Mixcder E9 PRO Manuel utilisateur
Mixcder
Mixcder E9 Manuel utilisateur
Mixcder
Mixcder E7 Manuel utilisateur
Mixcder
Mixcder HD501 Manuel utilisateur
Mixcder
Mixcder E8 Manuel utilisateur
