CUBE
You have purchased a quality product. It will last for a long time if it is
taken care of properly. Rinse the product with a hose and clean with
a mild soap solution. Store the product airy so that it can dry properly.
If the product is damaged, it can easily be dismantled and repaired.
Spare part kit available.
SEE OUR ENTIRE RANGE AT www.miwex.se
Assembly instructions
Art. no 800610
ASSEMBLY
Your Cube consists of 8 lock caps, 8 end discs,
8 stainless steel screws, 2 plates, 4 nylon rods &
discs for the pillars and hex wrench.
STAINLESS STEEL
SCREW
LOCK CAP
END DISC
NYLON ROD
PLATE
PILLAR
Assemble all parts
as shown and lock
the cap with the help
of the supplied hex
wrench.
