Mitsubishi Smart Hub Manuel utilisateur
1
Smart Hub
Networking
System
User Manual
2
Connection
What you can do with HUB
This projector is equipped with a relaying HUB.
You can do:
– Easy Data (File) Exchange
– Projection of the data in the computers connected
via the HUB
– Connection with an existing LAN
– Print out through a Network printer
Example of Network System
1) Connect laptop computers directly to the internal
HUB. Copy data to the computer which is con-
nected to this projector with RGB connection, and
project the data.
• You can also send presentation data to other
computers easily.
2) Connect an existing LAN network to the internal
HUB. Print out data through a Network printer
which is connected to the existing LAN.
• Read out data using the computer which has the
IP address of the existing LAN network and then
print them out.
• A printer driver, etc. may be necessary for printing.
Please refer to the owner’s guide of the printer.
Required Hardware
1. HUB TERMINAL (built-in)
2. LAN CABLE (at least 2 cables, included in the
box.)
3. LAN CARD (Network Card)
Some computers have a built-in LAN port. If your
computer doesn’t have one, you need at least two
LAN cards.
• They are not included in the box.
Flow of DATA
Existing LAN network
Flow of DATA
Connection with a computer
• When connecting computers, use the LAN X1 - X4
port of the internal HUB.
Connection with an External HUB
For connecting with an existing LAN, you should
connect the computers to the external HUB via
the internal HUB.
• When connecting with an external HUB, use the
LAN II5/X5 port of the internal HUB.
• The external HUB is not included in the box.
When connecting five computers, use an external
HUB or set the LAN II5/X5 port to X5 (10BASE-T) by
switching the cascade switch on the bottom face
using a rod such as a precision screwdriver.
II5 .... Port for connection with an external HUB.
X5 .... Port for connection with a computer.
Setting Computers
When building a network only with this projector and
computers, make preparations for all the computers
to be connected.
When using the HUB system, turn on the main
switch of the projector. The HUB system doesn’t
work when the main switch of the projector is off.
to LAN port
Internal HUB
to LAN X1 - X4 port Provided LAN cable or
optional streight LAN cable
Cascade switch
CASCADE
II5 X5
10BASE-T
Internal HUB
External HUB
to LAN II5/X5 port
to 10BASE-T port
Provided LAN cable or
optional streight LAN cable
3
For Windows Me/98/95
When building a network only with this projector and computers, make the preparations for all the computers to
be connected.
A. Check of “Client for Microsoft Networks”and “NetBEUI”
1. Click the Start button, point to Settings, and then click Control
Panel.
2. Double-click Network to open the Network dialog box.
3. Make sure that Client for Microsoft Networks and NetBEUI are
displayed in the installed network list.
•If the Client for Microsoft Networks is not displayed, go to
“E. Adding Client for Microsoft Network”.
•If the Net BEUI is not displayed, go to “F. Adding NetBEUI”.
For Windows 98 or Windows Me
4. Set Primary Network Logon to Client for Microsoft Networks.
B. Adding File and printer sharing for Microsoft Networks
1. Click the File and Print Sharing button.
2. Check the check boxes of I want to be able to give others access to
my files and I want to be able to allow others to print to my
printer(s), and then click OK.
•The File and printer sharing for Microsoft Networks appears
in the installed network list.
Settings
4
(Example: When sharing My
Documents folder.)
Settings (Continued)
C. Check of Computer name and Workgroup
1. Click Identification tab.
2. Make sure that Computer name and Workgroup are correct.
3. Click OK.
•You must restart your computer before the new settings will take
effect.
D. Sharing computer
1. In My Computer, right-click the icon of the folder you want to share
with others, and then click Sharing.
2. In the Properties dialog box, click Shared As.
3. In Share Name, type a name for the folder.
In Comment, you can type a brief comment or description of the folder.
4. Click OK.
•The folder icon changes to an icon with a hand, indicating that the
folder is now shared.
5. Go to “G. Using files and printers controlled by other
computers”
5
Settings (Continued)
E. Adding Client for Microsoft Networks
1. Click the Start button, point to Settings, and then click Control
Panel.
2. Double-click Network to open the Network dialog box.
3. Click Client, and then click Add.
•A list of client software appears.
4. In the Manufacturers list, click Microsoft.
5. In the Network Clients list, select Client for Microsoft Networks,
and then click OK.
•The Client for Microsoft Networks is added to your computer.
6. Go to “A. Check of “Client for Microsoft Networks”and
“NetBEUI””
6
F. Adding NetBEUI
1. Click the Start button, point to Settings, and then click Control
Panel.
2. Double-click Network to open the Network dialog box.
3. Click Protocol, and then click Add.
•A list of client software appears.
4. In the Manufacturers list, click Microsoft.
5. In the Network Protocols list, select NetBEUI, and then click OK.
•The NetBEUI is added to your computer.
6. Go to “A. Check of “Client for Microsoft Networks”and
“NetBEUI””
7
G. Using files and printers controlled by other computers
1. Double-click Network Neighborhood icon.
2. Double-click the icon for the computer that controls the folder you want
to use.
3. To use a shared folder, double-click its icon.
•If the computer you are looking for is not in your workgroup in step 2:
1. Double-click Entire Network icon.
2. Double-click the appropriate workgroup.
3. Double-click the icon for the computer that controls the folder
you want to use.
Settings (Continued)
8
For Windows 2000
When building a network only with this projector and computers, make the preparations for all the computers to
be connected.
A. Check of “File and Printer Sharing for Microsoft Networks”, “Client for Microsoft
Networks”and “NetBEUI protocol”
1. Click the Start button, point to Settings, and then click Control
Panel.
2. Double-click Network and Dial-up Connections to open the Net-
work dialog box.
3. Right-click Local Area Connection and then click Properties to
open the Local Area Connection properties dialog box.
4. Make sure that File and Printer Sharing for Microsoft Networks,
Client for Microsoft Networks and NetBEUI Protocol are dis-
played in the installed network list.
•If the File and Printer Sharing for Microsoft Networks is not
displayed, go to “D. Adding File and printer sharing for
Microsoft Networks”.
•If the Client for Microsoft Networks is not displayed, go to
“E. Adding Client for Microsoft Network”.
•If the NetBEUI Protocol is not displayed, go to “F. Adding
NetBEUI”.
5. Make sure that the check boxes of File and Printer Sharing for
Microsoft Networks, Client for Microsoft Networks and
NetBEUI Protocol are checked.
6. Click Close.
B. Check of Computer name and Workgroup
1. Click the Start button, point to Settings, and then click Control
Panel.
2. Double-click System to open the Network dialog box.
Settings (Continued)
9
3. Click Network Identification tab.
4. Make sure that Full computer name and Workgroup are correct.
5. Click OK.
•If they are not correct, change the computer name and Workgroup
as follows:
1. Click Properties.
2. Input a new computer name or Workgroup.
3. Click OK.
C. Sharing computer
1. In My Computer, right-click the icon of the folder you want to share
with others, and then click Sharing.
2. In the Properties dialog box, click Sharing tab, and then click
Shared this folder.
3. In Share Name, type a name for the folder.
In Comment, you can type a brief comment or description of the folder.
4. Click OK.
•The folder icon changes to an icon with a hand, indicating that the
folder is now shared.
5. Go to “G. Using files and printers controlled by other
computers”
Settings (Continued)
(Example: When sharing My
Documents folder.)
10
Settings (Continued)
D. Adding File and Printer Sharing for Microsoft Networks
1. Click the Start button, point to Settings, and then click Control
Panel.
2. Double-click Network and Dial-up Connections.
3. Right-click Local Area Connection
4. Click Properties to open the Local Area Connection properties
dialog box.
5. Click Install.
6. Click Service, and then click Add.
•A list of Network Service appears.
7. In the Network Service list, select File and Printer Sharing for
Microsoft Networks, and then click OK.
•The File and Printer Sharing for Microsoft Networks appears
in the installed network list.
8. Go to A. Check of “File and Printer Sharing for Microsoft
Networks”, “Client for Microsoft Networks”and “NetBEUI
protocol”.
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Mitsubishi Logiciel
Manuels Logiciel populaires d'autres marques
PS Audio
PS Audio PowerPlay Manuel du propriétaire
Brady
Brady LOCKOUT PRO 3.0 Manuel de service
Avaya
Avaya Interaction Center Manuel utilisateur
Texas Instruments
Texas Instruments TI-83 Plus Silver Edition Manuel
Novell
Novell GROUPWISE 8 - INTERNET AGENT Manuel utilisateur
Oracle
Oracle Application 9i Manuel utilisateur
Acer
Acer RDM Manuel utilisateur
Canon
Canon Vixia HF21 Manuel utilisateur
Canon
Canon ZR950 Manuel utilisateur
Samsung
Samsung Auto Backup Manuel utilisateur
Polycom
Polycom Vortex EF2201 Instructions d'installation et d'utilisation
Brocade Communications Systems
Brocade Communications Systems Brocade 8/12c Manuel utilisateur