Mitsubishi DIS710E Manuel utilisateur
ID PHOTO SYSTEM
DIS710E
OPERATION MANUAL
OPEN
MEMORYPRINT
MONITOR
ALARM SHEET PAPER S-VIDEO
REMOTE
POWER
2
Page
1 SAFETY PRECAUTIONS ......................................................................................... 3 - 5
2 UNPACKING ...................................................................................................................6
3 PRINTER SETUP ..................................................................................................... 7 - 9
4 CONNECTION.......................................................................................................10 - 11
5 TAKING THE FIRST PICTURE............................................................................. 12 - 13
6 PICTURE QUALITYADJUSTMENT ..................................................................... 14 - 16
7 FEATURES AND FUNCTIONS............................................................................. 17 - 18
8 ADVANCED SETTING.......................................................................................... 19 - 21
9 TROUBLESHOOTING..................................................................................................22
10 SPECIFICATIONS ........................................................................................................23
This system complies with the requirements of the EC Directive 89/336/EEC "EMC Directive"
as amended by Directive 93/68/EEC.
The electro-magnetic susceptibility has been chosen at a level that gains proper operation in
residential areas, on business and light industrial premises and on small-scale enterprises,
inside as well as outside of the buildings. All places of operation are characterised by their
connection to the public low voltage power supply system.
CONTENTS
This system is composed by the following components.
CONTENTS
Camera Connection box • System cable
• Operation manual
• 3 guide sheets
• Print paper and ink
sheet
REMOTE
MEMORY PRINT
MONITOR
POWER
OPEN
ALARM SHEET PAPER S-VIDEO
Printer
•AC cable
•Operation manual
•Ink cassette
Printer
Monitor
Strobe
Tripod
Options
(not provided from Mitsubishi)
System
3
1. SAFETY PRECAUTIONS
In the interest of safety, please observe the following precautions:
POWER REQUIREMENT
This system is designed for operation on 220V-240V, 50Hz AC. Never connect to any outlet or power supply
having a different voltage or frequency.
WARNNG: THIS APPARATUS MUST BE EARTHED.
AVERTISSEMENT: CET APPAREIL DOIT ETRE MIS A LA TERRE.
PROTECTIVE MEASURES
IF ABNORMAL OPERATIONS OCCUR, .....
Use of the unit during emission of smoke or abnormal sounds (without adopting countermeasures) is
dangerous. In such a case, unplug the power cord from the source outlet immediately, and request
maintenance service from the sales dealer.
NEVER INSERT ANY OBJECT INTO THE UNIT
Foreign objects of an kind inserted into this unit constitutes a safety hazard and can cause extensive
damage.
DO NOT PLACE ANYTHING ON THE COLOUR VIDEO COPY PROCESSOR
Heavy objects placed on the Colour Video Copy Processor can cause damage or obstruct proper ventilation.
PROTECT THE POWER CORD
Damage to the power cord may cause fire or shock hazard. When unplugging, hold by the plug only and
remove carefully.
DO NOT PLACE WATER CONTAINERS ON THE UNIT
Do not place flower vases, and other water-holding containers on the device. If, for some reason, water
seeps to the inside of the unit, unplug the power cord from the source outlet, and contact the sales dealer. If
used without corrective measures, the unit may be damaged.
"In the interest of safety, avoid handling of liquids near the unit."
DO NOT REMOVE THE CABINET
Touching internal parts is dangerous, and could lead to malfunction. Contact the sales dealer to carry
out internal checks and adjustments. Before opening the cover for eliminating jammed paper, etc., be sure
to disconnect the power cord plug.
UNPLUG THE POWER CORD DURING A LONG ABSENCE
Turn off the MAIN power switch and unplug the power cord during a long absence.
WHEN TRANSPORTING THE UNIT
When transporting the unit, remove the sheet cartridge and paper from the paper cassette, and insert the
protective cushion into its compartment. Make sure to replace the printer's transit screw.
BE CAREFUL AROUND PRINT PAPER EXIT SLOT
Don't insert your hand or any material into the paper exit slot during printing.
Don't touch the cutter blade inside the paper exit slot.
Otherwise, your finger will be injured.
DO NOT TOUCH THE THERMAL HEAD
Do not touch the thermal head (located inside the unit).
The thermal head is heated to high temperature, and may cause injury.
4
BE CAREFUL WITH THE PRINTING UNIT
Don't move the unit while the printing unit is sliding out. This may cause injury.
Be careful not to catch your finger in the printing unit while the printing unit is being retracted into the unit.
CONNECTION CABLES
Use the cables provided
INSTALLATION LOCATIONS
MAINTAIN GOOD VENTILATION
Ventilation slots and holes are provided on the top, sides and bottom of this unit. Place the unit on a hard
and level surface and locate at least 10 cm from walls to insure proper ventilation. When putting the unit on
the system rack, take a space between the unit and the back of the rack.
UNSUITABLE LOCATIONS
Avoid shaky places or hot-springs areas where hydrogen sulfide and acidic ions are likely to be generated.
PLACES WITH HIGH HUMIDITY AND DUST
Do not place the unit in locations with high humidity and dust, which can cause extensive damage. Avoid places
where unit is likely to be exposed to oily fumes and vapours.
PLACES LIKELYTO BE EXTREMELYHOT
Places exposed to direct sunlight, or near heating appliances can attain extremely high temperatures, which
may deform the cabinet, or can become a prime cause of damage.
PLACE THE UNIT ON A HORIZONTAL LEVEL
The unit is likely to be affected if it is placed in slanted conditions or in unstable places.
PROTECT AGAINST DEW FORMATION
In extremely cold regions, if the unit is moved quickly from an extremely cold place to warmer one, dew is
likely to be formed.
If dew is formed, printing is not possible.
OPERATING AMBIENT TEMPERATURE RANGE
The operating ambient temperature range is 5°C- 40°C, and humidity of 20-80%. When using the unit on the
system rack, be sure to keep this ambient temperature inside the rack.
FOR LONG OPERATING LIFE
UNSUITABLE MATERIALS FOR THE COLOUR VIDEO COPY PROCESSOR
Coat flaking and deformation are likely to occur if the unit is wiped with chemical dusters, benzine, thinner or
any other solvent, if rubber or PVC items are left in contact with the unit for extended duration, or if the unit
is sprayed with insecticide.
CARE OF THE CABINET
Unplug and clean with a soft cloth slightly moistened with a mild soap and water solution. Allow to dry
completely before operating. Never use petroleum base solutions or abrasive cleaners.
HEAD ABRASION
The thermal head, like the video head, wears out. When it is abraded, it becomes hard to print out fine
details of the picture. In such a case, it is necessary to replace the thermal head. Consult with the sales
dealer for replacing the head.
5
CAUTION ON RELOCATING
When transporting this unit, make sure it is not likely to be subjected to impacts. They can be a prime cause
for damage. Further, make sure to disconnect the power cord from the power outlet, and the cables from the
connected devices.
CONNECTING DEVICES
Read thoroughly "Operating Precautions" of the instruction booklets for the devices connected with the
Colour Video Copy Processor.
The power cord must be disconnected after printing is over.
OTHER CAUTIONS
Dust or other foreign matter adhering to the print paper or the sheet cartridge, or deformation resulting from
exposure to extremely low or high temperatures could cause loss of colour, uneven colour or lines, or
wrinkles in the print images.
NOTE:
YOUR UNDERSTANDING IS REQUESTED FOR THE LOSS OF IMAGES IN MEMORY DUE TO THE
SUDDEN OCCURRENCE OF A MALFUNCTION.
6
2. UNPACKING
Take the unit out of the box by the following procedures. Make sure to check the contents.
22
22
2
PRINTER
11
11
1
Open the top of the box.
22
22
2
Remove the accessory box.
33
33
3
Remove the cushion above the unit.
44
44
4
Take the unit out of the box carefully.
Make sure to keep the unit horizontal.
Then, unwrap the packing.
•Accessory box
Power cord
Operation manual
Sheet “Installing print paper and ink
sheet”
Ink cassette
Camera
Connection box
Print paper
Ink sheet
Operation
manual
System cable
Remote control
22
22
2
CAMERA, ETC.
11
11
1
Open the top of the box.
22
22
2
Take out the system cable.
33
33
3
Remove the top cushion.
44
44
4
Take the connection box,
camera, print paper, ink sheet
and operation manual out of the
box carefully.
7
3. PRINTER SETUP
Transport
screw
S-VIDEO
REMOTE
AC LINE
VIDEO
1 2
Stored position
REMOVING SCREW AND CUSHION
See CP710E operation manual for details.
22
22
2
REMOVING SCREW
11
11
1
Remove the screw at the bottom of printing unit with a
screwdriver or coin.
Protective cushion
1
Before printing a photo, install a print paper and ink cassette.
22
22
2
Set the removed screw to the hole on the rear panel to keep.
22
22
2
REMOVING PROTECTIVE CUSHION
11
11
1
Press the OPEN button on the front panel.
Printing unit advances to the front.
22
22
2
Pull out the protective cushion from the right side.
NOTE
•Keep the protective cushion for transporting this unit.
•It is very important to transport this printer with the
protective cushion installed so as not to damage the
printing unit.
INSTALLING PRINT PAPER AND INK SHEET
INSTALLATION PROCEDURE OF PRINT PAPER
11
11
1
Movethe knob on the printing unit tothe direction indicated
by the arrow.
If you attach the connection box, refer to page 11.
8
22
22
2
Insert the print paper in the position as shown right.
Place the gear to the right side.
Set the paper roll first on the right side paper holder.
Then, set the paper roll on the left side paper holder.
Print paper Holder
Install
Holder
Print paper
Right side
Left side
33
33
3
Insert the print paper between roller
11
11
1
and
22
22
2
.
44
44
4
Insert the edge of the print paper to roller
33
33
3
.
Be sure to insert the paper straight.
Roller Roller
Roller
Paper Paper Paper
INCORRECT CORRECT INCORRECT
1
Roller
2
Roller
3
Roller
Print paper
1
55
55
5
Feed the print paper through the exit slot straight with your
hand.
66
66
6
Pull the print paper to eliminate slack.
NOTE
Iftoomuch paperis fed,an errormayoccur.("PAPER JAM12"
is indicated on the monitor screen.) In this case, press the
MEMORY button while holding the MONITOR button for a
second.
77
77
7
Move the knob on the side of the printing unit to the
direction as indicated by the arrow.
9
White roller
A
B
C
E
Coloured roller
INSTALLING THE INK SHEET
Install the ink cassette with the ink sheet rolls before inserting the
ink cassette into the printer.
11
11
1
Put the coloured roller of the ink sheet to the ink cassette.
AAAAA
BB
BB
B
22
22
2
Put the thin stick of white roller to the ink cassette.
CC
CC
C
33
33
3
Put the thick stick of white roller to the ink cassette.
DEDE
DEDE
DE
On the
D
position, turn the roller and set the notch of the roller side
to the hole of the cassette.
The roller can be installed when notch is put through the hole.
E
D
notch
INSTALLING THE INK CASSEETTE
11
11
1
Eliminate any slack of the ink sheet.
Hold the roller
A
and
B
and turn the white roller.
22
22
2
Insert the ink cassette with the ink sheet into its
compartment.
Insert the ink cassette with the knob side toward you until it is
locked into place.
•When taking the ink cassette out of the compartment, press
the ink cassette locking holder to release the lock.
SET THE PRINTING UNIT
11
11
1
Push the printing unit until it is locked into place.
22
22
2
After plugging the power cord, press POWER button on the
front panel.
33
33
3
Press the MEMORYbutton for about 1 second while holding
the MONITOR button on the front panel .
•The print paper is automatically cut after sending by about
10cm.
44
44
4
Repeat 3 step.
(Fingerprints and dust can be removed by feeding the print
paper. The printing unit is initialized.)
A
B
10
S-VIDEO
REMOTE
AC LINE
VIDEO
1 2
4. CONNECTION
Connect the components as follows.(example)
Make sure to turn off each device when connecting.
If you wish to fix the connection box to the printer, set them first before connecting with cables.
CABLE CONNECTION
To AC LINE
To VIDEO
OUT
Transport screw
(when fixing to
the printer)
System cable
Composite
video cable
(option)
AC power cord
(supplied with
the printer)
Monitor (option)
(or)
To S-VIDEO IN To
REMOTE
Strobe
(option)
Table des matières
Autres manuels Mitsubishi Caméra de sécurité
Mitsubishi
Mitsubishi Black Diamond BDM5203H Manuel utilisateur
Mitsubishi
Mitsubishi Black Diamond BDC4803VFD Manuel utilisateur
Mitsubishi
Mitsubishi NM-IP4500 Manuel utilisateur
Mitsubishi
Mitsubishi Black Diamond BDC4803VF Manuel utilisateur
Mitsubishi
Mitsubishi CCD-100E Manuel utilisateur
Mitsubishi
Mitsubishi DC-420E Manuel utilisateur
