Mitsubishi TU100SAE Manuel utilisateur
MITSUBISHI TRANSPORT REFRIGERATION UNIT
TU100SAE
TU100SAEM
This operation manual is
intended to provide users
with a good knowledge to
use Mitsubishi Refrigeration
Unit safely.
Operate or service the
refrigeration unit only after
you have read this manual
and understand its
contents.
Carefully store this manual
in a xed place so that it is
immediately available for
your reference when you
need it.
YEAR:2016
TSJ012A181A
OPERATION MANUALOPERATION MANUAL
- I -
Thank you for your purchase of Mitsubishi Transport
Refrigeration Unit.
Purpose of use and application
This Refrigeration Unit is intended to carry the cargo (with the exception of
volatile, inflammable, hazardous and corrosive matters) on a transportation
vehicle, keeping the inside container temperature at a certain degree.
If the Refrigeration Unit is used for any purposes other than this purpose, it
may cause accidents or damages.
Important information
For questions or information, contact your nearest dealer.
● Be sure to follow the contents described in this manual in order to protect
yourself and other people from potential risks of this refrigeration unit and
to prevent it from getting damaged.
● We are not able to foresee all potential risks of this refrigeration unit or
dangers due to mishandling by the customers. Therefore, it is necessary
to take measures for safety in addition to the items described in this
manual or on warning labels.
● For the following works, contact your nearest dealer. If those works were
carried out by customer, the refrigeration unit may lose its performance
and we may not be able to ensure the safety of the customer.
(a) Installation, modification, specification change and disposal for
the refrigeration unit
(b) Maintenance of electric appliances
(c) Abnormal treatments which are not described in this manual
● This product contains fluorinated greenhouse gases.
•Refrigerant : R404A (GWP (Global Warming Potential)=3922)
Refer to a label on unit about weight of fluorinated greenhouse gases and
CO2equivalent. ( Refer to pages 7.)
- II -
Operation manual
● This operation manual is prepared for people who speaks English. In case
that person whose native language is not English handles this refrigeration
unit, he or she must be instructed on safety by the customer. Furthermore,
the warning labels described in their native language must be prepared
and stuck on the proper places.
● This operation manual is copyrighted and all rights are reserved by our
company. The drawings and technical information described in this
manual may not, in whole or part, be published, copied, translated for
the purposes other than above-mentioned and reduced to any electronic
medium or machine-readable form without prior written consent with our
company.
● This manual also contains the explanation of optional specification.
● The contents of this operation manual may differ from that of the
refrigeration unit used by a customer due to specification change.
● The contents described in this operation manual may be changed without
a prior notice.
● When transferring or lending the refrigeration unit, attach this operation
manual together with the unit so that the operators should be able to have
a good knowledge on safety.
● Keep this operation manual in the vehicle so that it is available for your
reference when you need it.
● Unless otherwise noted, "right" and "left" directions are given as viewed
from the front of the refrigeration unit.
For disposal
Contact your nearest dealer when disposing the refrigeration unit. Observe
the applicable laws and regulations in your country to dispose refrigerants
and cooling water.
- III -
1
5
2
6
3
7
9
4
8
10
Contents
Purpose of use and application- I
Important information------------ I
Operation manual ----------------II
For disposal -----------------------II
Contents-------------------------- III
1 Function of Refrigeration
Unit------------------------- 1
2 Name of each part ------- 3
Arrangement plan for main parts
--3
Evaporator unit -------------------5
Condensing unit -----------------7
Cabin controller ------------------8
Digital display area ---------------9
Protective devices-------------- 11
3 Precaution for safety---- 12
Signs on safety ----------------- 12
Precautions --------------------- 13
General precautions ---------------- 13
During and after the operation ---- 14
Inspection/Cleaning/Repair-------- 15
Loading ------------------------------ 16
Handling of electric equipment and
power codes------------------------- 16
Reinstallation of refrigeration unit
--- 18
Modification of refrigeration unit and
specification change
---------------- 18
Power supply equipment ---------- 18
Emergency measure ----------- 19
Handling of warning labels ---- 21
Prevention of start during
inspection work----------------- 23
Clothing and protective equipment
-- 23
Handling of grease and oil----- 23
When abnormal conditions are
detected ------------------------- 23
For emergency------------------ 23
4 Initial setting ------------- 24
Mode displays and functions
-- 24
Outline of the user setting mode
-- 27
Setting the clock/calendar ---- 29
Setting the defrost interval timer
-- 31
Displaying the operation time/
cycles ---------------------------- 32
Forced fuel circulating method
-- 35
5 Operation----------------- 36
Power on ------------------------ 37
Switching the drive ------------ 38
Operating with the engine --------- 38
Operating with the motor ---------- 38
Selecting the operation pattern
-- 39
Operation------------------------ 41
Stopping the operation -------- 42
Normal stop ------------------------- 42
Method to stop operation at each room
[Multiple specification (TU100SAEM)
only] ---------------------------------- 43
Setting temperature ------------ 44
Whisper operation
(Only for engine drive)---------- 46
- IV -
1
5
2
6
3
7
9
4
8
10
Manual defrost operation------ 47
Starting------------------------------- 47
Stopping ----------------------------- 47
Setting the ON timer ----------- 48
Setting the OFF timer ---------- 50
Self diagnosis operation
(PTI operation) ------------------ 52
Starting the operation -------------- 52
Finishing the operation when no
defects are detected --------------- 53
When abnormal conditions are
detected ----------------------------- 53
6 Loading ------------------ 54
Preparation before loading ---- 54
Loading and unloading -------- 55
Loading procedure ----------------- 55
Unloading ---------------------------- 56
7 Inspection ---------------- 57
Precautions for inspection ---- 57
Opening the front panel of
condensing unit----------------- 59
Closing the front panel of
condensing unit----------------- 59
Daily inspection----------------- 60
Inspection of cooling water quantity
-- 60
Inspection of moving sections ---- 61
Inspection of engine oil quantity --- 62
Inspection of engine fuel quantity
--- 63
Inspection of leakage and wiring
condition ----------------------------- 63
Inspection of condenser coil ------ 64
Periodic inspection------------- 65
Periodic inspection check sheet
-- 66
Details of applicable oils and
cooling water-------------------- 68
Power supply system ---------- 68
8 Operation or stop for long
period of time------------ 69
When operating at a low inside container
temperature for a long period of time:
-- 69
When stopping the refrigeration unit for
a long period of time:
------------------- 69
9 For emergency ---------- 70
Alarm display ------------------- 70
Switching "Normal display" and
"Current alarm display" -------- 70
Switching from "Normal display screen"
to "Current alarm display mode"
------ 70
Extending "Current alarm display
mode"
--------------------------------- 70
Switching from "Current alarm display
mode" to "Normal display screen"
-- 70
Countermeasures--------------- 71
Changing the fuse ------------------ 71
When you contact your nearest
dealer--------------------------------- 72
Resuming operation after an
emergency stop
------------------ 73
List of alarm codes ------------- 74
10 Specification ------------- 77
- 1 -
1 Function of Refrigeration Unit
1
5
2
6
3
7
9
4
8
10
This refrigeration unit has following functions.
(1) Drive switching function
This is the function to switch the drive (engine/motor) depending on
whether the commercial power supply is connected or not.
Refer to page 38 for how to switch the drive.
(2) Operation pattern selection function
This is the function to switch operation pattern (automatic start/stop
operation/continuous operation).
For the switching of operation pattern, refer to pages 39 and 40.
(3) Defrosting operation function
This is the function to protect evaporator from frosting during cooling
operation and to prevent refrigerating power from decreasing.
There are following 2 methods to start defrosting operation.
1) Automatic defrosting operation
Defrosting starts automatically by the timer setting.
Refer to page 31 for defrosting timer setting.
2) Manual defrosting operation
Defrosting starts forcibly by pressing the switch of controller.
Refer to page 47 for how to operate.
As the defrosting operation is completed, the refrigeration unit returns to
the cooling operation.
Defrosting operation will not start when the evaporator temperature is
high even during the cooling operation
(4) Whisper operation function
This is the function to lower the operation sound with fixing the engine at
slow speed forcibly during engine driving.
Refer to page 46 for how to operate.
- 2 -
1 Function of Refrigeration Unit
1
5
2
6
3
7
9
4
8
10
(5) Timer operation function
This is the function to set starting time and stopping time of the
operation .
Refer to pages from 48 to 51 for how to set.
(6) Self diagnosis operation function [PTI (Pre Trip Inspection)
operation]
This is the function to diagnose the refrigeration unit automatically if it
has any trouble or not.
Refer to pages from 52 to 53 for how to operate.
- 3 -
2 Name of each part
1
5
2
6
3
7
9
4
8
10
1
Evaporator unit
6
Cabin controller
2
Condensing unit
7
Fuel pump
3
Control box
8
Fuel tank
4
Refrigerant piping
9
Water separator
5
Battery
5
9
6
87
1
2 3 4
Actual locations of above units, etc. should be checked beforehand because they could
vary depending on vehicle models, or other.
Arrangement plan for main parts
■Single specification (TU100SAE)
- 4 -
2 Name of each part
1
5
2
6
3
7
9
4
8
10
Actual locations of above units, etc. should be checked beforehand because they could
vary depending on vehicle models, or other.
1
Front room evaporator unit
6
Battery
2
Rear room evaporator unit
7
Cabin controller
3
Condensing unit
8
Fuel pump
4
Control box
9
Fuel tank
5
Refrigerant piping
10
Water separator
10
98
1
2
3 4 6
5 7
■Multiple specification (TU100SAEM)
- 5 -
2 Name of each part
1
5
2
6
3
7
9
4
8
10
Evaporator unit
■Single specification (TU100SAE)
1
Supply air outlet for evaporator
4
Evaporator coil
2
Electric heater (Optional)
5
Electronic expansion valve
3
Evaporator fan motor
A
1
5
4
2
3
Inside of view "A"
•Thin type : TU100SAE-EVX
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels Mitsubishi Réfrigérateur
Mitsubishi
Mitsubishi TDJ430D Manuel utilisateur
Mitsubishi
Mitsubishi TNW4EA Series Manuel utilisateur
Mitsubishi
Mitsubishi MR-C375C Manuel utilisateur
Mitsubishi
Mitsubishi TEJ50AE Manuel utilisateur
Mitsubishi
Mitsubishi MR-BF43B Manuel utilisateur
Mitsubishi
Mitsubishi TEJ100AM Manuel utilisateur
Mitsubishi
Mitsubishi MR-260T Manuel utilisateur
Mitsubishi
Mitsubishi MR-C405B Guide d'installation
Mitsubishi
Mitsubishi MR-H290S Manuel utilisateur
Mitsubishi
Mitsubishi TEJ130AEM Manuel utilisateur
Mitsubishi
Mitsubishi MR-260C Manuel utilisateur
Mitsubishi
Mitsubishi MR-CU415X Manuel utilisateur
Mitsubishi
Mitsubishi MR-508C Manuel utilisateur
Mitsubishi
Mitsubishi MR-H290X Manuel utilisateur
Mitsubishi
Mitsubishi MR-FV24EJ Manuel utilisateur
Mitsubishi
Mitsubishi MR-385R-ST-A(NZ) Manuel utilisateur
Mitsubishi
Mitsubishi MR-508U Series Manuel utilisateur
Mitsubishi
Mitsubishi MR-L710EG Manuel utilisateur
Mitsubishi
Mitsubishi MR-BF290B Manuel utilisateur
Mitsubishi
Mitsubishi TE30GAE Manuel utilisateur
