Mitsubishi Diamond Plus 73 Manuel utilisateur

For future reference, record the serial

number of your display monitor in the

space below:

SERIAL No.

The serial number is located on the

rear cover of the monitor.

AUTO-SCANNING WITH DIGITAL CONTROL

COLOR DISPLAY MONITOR

MODEL : N0701

USER'S MANUAL

IBM is registered trademark of International Business Machines Corporation

Apple and Macintosh are registered trademarks of Apple Computer Inc.

Microsoft and Windows are registered trademarks of the Microsoft Corporation.

ENERGY STAR is a U.S. registered mark.

All other trademarks or registered trademarks are property of their respective owners.

ENERGY STAR®Product

As an ENERGY STAR Partner, NEC-Mitsubishi Electronics Display has determined

that this product meets the ENERGY STAR guidelines for energy efficiency. The

ENERGY STAR emblem does not represent EPA endorsement of any product or

service.

RADIO INTERFERENCE REGULATIONS STATEMENT FOR U.S.A.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off

and on, the user is encouraged to try to correct the interference by one or

more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help.

NO USER SERVICEABLE PARTS INSIDE. DO NO ATTEMPT TO

MODIFY THIS EQUIPMENT. IF MODIFIED, YOUR AUTHORITY TO

OPERATE THIS EQUIPMENT MIGHT BE VOIDED BY FCC.

Declaration of Conformity-United States only

Product Name: 17in.(43cm)Color Display Monitor

Type: N0701

Brand Name: MITSUBISHI

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions : (1) this device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

U.S Responsible party: NEC-Mitsubishi Display of America,Inc.

Adress: 1250 N. Arlington Heights Road

ltasca, illinois 60143

Tel. No.: (630)467-3000

To identify this product, refer to the model number found on the product.

T-1

TCO'99

Congratulations!

You have just purchased a TCO’99 approved and

labelled product! Your choice has provided you with

a product developed for professional use. Your

purchase has also contributed to reducing the burden

on the environment and also to the further

development of environmentally adapted electronics

products.

Why do we have environmentally labelled computers?

In many countries, environmental labelling has become an established

method for encouraging the adaptation of goods and services to the

environment. The main problem, as far as computers and other electronics

equipment are concerned, is that environmentally harmful substances are

used both in the products and during their manufacture. Since it is not so

far possible to satisfactorily recycle the majority of electronics equipment,

most of these potentially damaging substances sooner or later enter

nature.

There are also other characteristics of a computer, such as energy

consumption levels, that are important from the viewpoints of both the

work (internal) and natural (external) environments. Since all methods of

electricity generation have a negative effect on the environment

(e.g.acidic and climate-influencing emissions, radioactive waste), it is vital

to save energy. Electronics equipment in offices is often left running

continuously and thereby consumes a lot of energy.

What does labelling involve?

This product meets the requirements for the TCO’99 scheme which

provides for international and environmental labelling of personal

computers. The labelling scheme was developed as a joint effort by the

TCO (The Swedish Confederation of Professional Employees), Svenska

Naturskyddsforeningen (The Swedish Society for Nature Conservation)

and Statens Energimyndighet (The Swedish National Energy

Administration).

Approval requirements cover a wide range of issues: environment,

ergonomics, usability, emission of electric and magnetic fields, energy

consumption and electrical and fire safety.

The environmental demands impose restrictions on the presence and use

of heavy metals, brominated and chlorinated flame retardants, CFCs

(freons) and chlorinated solvents, among other things. The product must

T-2

be prepared for recycling and the manufacturer is obliged to have an

environmental policy which must be adhered to in each country where the

company implements its operational policy.

The energy requirements include a demand that the computer and/or

display, after a certain period of inactivity, shall reduce its power

consumption to a lower level in one or more stages. The length of time to

reactivate the computer shall be reasonable for the user.

Labelled products must meet strict environmental demands, for example,

in respect of the reduction of electric and magnetic fields, physical and

visual ergonomics and good usability.

Below you will find a brief summary of the environmental requirements

met by this product. The complete environmental criteria document may

be ordered from:

TCO Development

SE-114 94 Stockholm, Sweden

Fax: +46 8 782 92 07

Email (Internet): [email protected]

Current information regarding TCO’99 approved and labelled

products

may also be obtained via the Internet, using the address:

http://www.tco-info.com/

Environmental requirements

Flame retardants

Flame retardants are present in printed circuit boards, cables, wires,

casings and housings. Their purpose is to prevent, or at least to delay the

spread of fire. Up to 30% of the plastic in a computer casing can consist

of flame retardant substances. Most flame retardants contain bromine or

chloride, and those flame retardants are chemically related to another

group of environmental toxins, PCBs. Both the flame retardants containing

bromine or chloride and the PCBs are suspected of giving rise to severe

health effects, including reproductive damage in fish-eating birds and

mammals, due to the bio-accumulative* processes. Flame retardants have

been found in human blood and researchers fear that disturbances in

foetus development may occur.

The relevant TCO’99 demand requires that plastic components weighing

more than 25 grams must not contain flame retardants with organically

bound bromine or chlorine. Flame retardants are allowed in the printed

circuit boards since no substitutes are available.

T-3

Cadmium**

Cadmium is present in rechargeable batteries and in the colour-

generating layers of certain computer displays. Cadmium damages the

nervous system and is toxic in high doses. The relevant TCO’99

requirement states that batteries, the colour-generating layers of display

screens and the electrical or electronics components must not contain any

cadmium.

Mercury**

Mercury is sometimes found in batteries, relays and switches. It damages

the nervous system and is toxic in high doses. The relevant TCO’99

requirement states that batteries may not contain any mercury. It also

demands that mercury is not present in any of the electrical or electronics

components associated with the labelled unit.

CFCs (freons)

The relevant TCO’99 requirement states that neither CFCs nor HCFCs may

be used during the manufacture and assembly of the product. CFCs

(freons) are sometimes used for washing printed circuit boards. CFCs

break down ozone and thereby damage the ozone layer in the

stratosphere, causing increased reception on earth of ultraviolet light with

e.g. increased risks of skin cancer (malignant melanoma) as a

consequence.

Lead**

Lead can be found in picture tubes, display screens, solders and

capacitors. Lead damages the nervous system and in higher doses, causes

lead poisoning. The relevant TCO’99 requirement permits the inclusion of

lead since no replacement has yet been developed.

* Bio-accumulative is defined as substances which accumulate within

living organisms.

** Lead, Cadmium and Mercury are heavy metals which are

Bio-accumulative.

English

Deutsch

Français

Español

Italiano

E-1

Monitor box* should contain the following:

* Remember to save your original box and packing material to transport

or ship the monitor.

* Complete and mail in warranty card. (for North America)

• Color Monitor Diamond Plus 73

• Warranty card (for North America)

• Questionnaire card (for North America)

• User‘s manual

• Power cord (Put only one Type)

Contents

CAUTION

The power cord provided with this monitor is

designed for safety and must be used with a properly

grounded outlet to avoid possible electrical shock.

Do not remove the monitor cabinet as this can expose

you to very high voltages and other hazards.

MANUFATURER DECLARATION

FOR CE-MARKING:

We, NEC-Mitsubishi Electric Visual

SystemsCorporation, declare under our

sole responsibility, that this product is in

conformity with the following standards:

EN60950

EN55022(Class B)

EN61000-3-2

EN61000-3-3

EN55024

(IEC61000-4-2)

(IEC61000-4-3)

(IEC61000-4-4)

(IEC61000-4-5)

(IEC61000-4-6)

(IEC61000-4-8)

(IEC61000-4-11)

following the provisions of:

73/23/EEC Low Voltage Directive

89/336/EEC EMC Directive

WARNING!

This product is not designed for use in life support

devices and NEC-Mitsubishi Electric Visual Systems

Corporation makes no representations to the contrary.

Life support devices are those devices which are used

to measure, diagnose, or evaluate the tissue, systems

or functions of the human body; or other devices

employed to support or sustain life or good health.

UL/CSA (or) Europe (or) UK

E-2

Quick Start

To attach the Monitor to your system, follow

these instruction:

1 Turn off the power to your computer and the monitor.

2 If necessary, install the display card. For more information, refer to the

display card manual.

3For the PC: Connect the 15-pin mini D-SUB of the captive signal

cable to the connector of the display card in your system (Figure A.1)

Tighten all screws.

For the Mac: Connect the Macintosh Cable Adapter (not included)

to the monitor connector on the Macintosh (Figure B.1). Attach the 15-

pin mini D-SUB end of the captive signal cable to the Macintosh cable

adapter on the computer (Figure B.1). Tighten all screws.

4 Connect one end of the power cord to the monitor and the other end to

the power outlet (Figure C.1).

5 Turn on the monitor (Figure D.1) and the computer.

6 This completes the installation.

NOTE: If you have any problems, please refer to the

Troubleshooting section of this User's Manual.

Captive Signal Cable

15-pin-mini-D-SUB

Figure A.1

Ce manuel convient aux modèles suivants

Table des matières

Langues :

Autres manuels Mitsubishi Moniteur

Mitsubishi

Mitsubishi DiamondPoint NXM76LCD Manuel utilisateur

Mitsubishi

Mitsubishi LDT46IV Manuel utilisateur

Mitsubishi

Mitsubishi FHL7156 series Manuel utilisateur

Mitsubishi

Mitsubishi E55LCD Manuel utilisateur

Mitsubishi

Mitsubishi DiamondPoint NX85LCD Manuel utilisateur

Mitsubishi

Mitsubishi Diamond Pro 87TXM Manuel utilisateur

Mitsubishi

Mitsubishi Diamond Plus 230 SB Manuel utilisateur

Mitsubishi

Mitsubishi HL6945K Series Manuel utilisateur

Mitsubishi

Mitsubishi PD-5030 Manuel utilisateur

Mitsubishi

Mitsubishi JC-17W41 Manuel utilisateur

Mitsubishi

Mitsubishi Diamond Pro 920 Manuel utilisateur

Mitsubishi

Mitsubishi Diamond Pro 920 NUR1905STTKW Manuel utilisateur

Mitsubishi

Mitsubishi E85LCD-BK Manuel utilisateur

Mitsubishi

Mitsubishi DiamondPoint V50LCD Manuel utilisateur

Mitsubishi

Mitsubishi DiamondPoint UX21LCD Manuel utilisateur

Mitsubishi

Mitsubishi DiamondPoint M55LCD Manuel utilisateur

Mitsubishi

Mitsubishi Diamond Scan 90E Manuel utilisateur

Mitsubishi

Mitsubishi DPLUS 74SB -BKB Manuel utilisateur

Mitsubishi

Mitsubishi PD-4265 Manuel utilisateur

Mitsubishi

Mitsubishi Diamond Scan SD5800C Manuel utilisateur

Mitsubishi

Mitsubishi diamond pro 1000 TFX1105SKTKW Manuel utilisateur

Mitsubishi

Mitsubishi AUM-1371A Manuel utilisateur

Mitsubishi

Mitsubishi Diamond Pro 930SB Manuel utilisateur

Mitsubishi

Mitsubishi PD-5010 Manuel utilisateur

Manuels Moniteur populaires d'autres marques

Linear Acoustic

Linear Acoustic LQ-1000 Manuel utilisateur

AOC

AOC I2579V Manuel utilisateur

Gateway

Gateway FPD1520 Manuel utilisateur

Furuno

Furuno Mu 120c Manuel utilisateur

Asus

Asus VB171D - 17" LCD Monitor Manuel utilisateur

Dell

Dell S2230MX Instructions d'utilisation

Philips

Philips 107C64 Manuel utilisateur

Dell

Dell S2409WFP Manuel utilisateur

EverFocus

EverFocus EN-7517E Manuel utilisateur

Panasonic

Panasonic TH152UX1 - 152" PLASMA TV Manuel utilisateur

Dell

Dell Precision 7680 Mode d’emploi

LG 50PM1M - - 50" Plasma Panel Manuel utilisateur

Bosch

Bosch DDU 9 Manuel utilisateur

Acer

Acer A231HL Manuel utilisateur

Philips

Philips 86BDL4152T Manuel utilisateur

NEC

NEC AccuSync LCD5V Manuel utilisateur

Emay

Emay SleepO2 Manuel utilisateur

IBM

IBM 6360 Instructions d'installation