Mitsubishi Electric PAR-SL101A-E Series Instructions d'installation et d'utilisation

CITY MULTI Control System and

Mitsubishi Mr. Slim Air Conditioners

Wireless Remote Controller

PAR-SL101A-E Series

English

OPERATION MANUAL / INSTALLATION MANUAL FOR USER / FOR INSTALLER

VH79A034H01_cover.indd 1 2021/04/21 16:37:37

001

This installation manual contains only the description of how to install the wireless remote controller unit

PAR-SL101A-E.

Foryoursafety,rstbesuretoread“1. Safety Precautions” described below thoroughly and then install the

wireless remote controller unit PAR-SL101A-E correctly.

1. Safety Precautions

Installation Manual Contents

•The following two symbols are used to denote dangers that may be caused by incorrect use and their degree:

WARNING: This symbol denotes what could lead to serious injury or death if you misuse the PAR-

SL101A-E.

CAUTION: This symbol denotes what could lead to a personal injury or damage to your property if you

misuse the PAR-SL101A-E.

• After reading this installation manual, keep it in a place where the final user can see it anytime.

When someone moves, repairs or uses the PAR-SL101A-E, make sure that this manual is forwarded to the final user.

WARNING

■Ask your dealer or technical representative to install the unit.

• Anydeciencycausedbyyourowninstallationmayresultinanelectricshockorre.

■Install in a place which is strong enough to withstand the weight of the PAR-SL101A-E.

• Any lack of strength may cause the PAR-SL101A-E to fall down, resulting in personal injury.

■Never modify or repair the PAR-SL101A-E by yourself.

• Anydeciencycausedbyyourmodicationorrepairmayresultinanelectricshockorre.

Consult with your dealer about repairs.

■Ensure that installation work is done correctly following this installation manual.

• Anydeciencycausedbyinstallationmayresultinanelectricshockorre.

■All electrical work must be performed by a licensed technician, according to local regulations and the instruc-

tions given in this manual.

• Anylackofelectriccircuitoranydeciencycausedbyinstallationmayresultinanelectricshockorre.

■Do not move and re-install the PAR-SL101A-E yourself.

• Anydeciencycausedbyinstallationmayresultinanelectricshockorre.

Ask your distributor or special vendor for moving and installation.

■To dispose of this product, consult your dealer.

1. Safety Precautions ..................................................... 1

2. Confirming the Supplied Parts.................................... 2

3. Installation .................................................................. 3

4. Various settings .......................................................... 4

5. Initial setting ............................................................... 5

5.1. Switching to the initial setting mode ................... 5

5.2. Changing the temperature unit ........................... 5

5.3. Changing the time display .................................. 5

5.4. Changing the AUTO mode.................................. 5

5.5. Changing the pair No.......................................... 6

5.6. Changing the backlight setting ........................... 7

5.7. Completing the settings...................................... 7

6. Function settings ........................................................ 7

6.1. Switching to the function setting mode ............... 7

6.2. Entering the group model setting number .......... 7

6.3. Separate settings mode 1................................... 8

6.4. Completing the settings...................................... 9

6.5. Separate setting mode 2 .................................. 10

6.6. Completing the setting.......................................11

7. Service ..................................................................... 12

7.1. Test run............................................................. 12

7.2. Self-check......................................................... 12

7.3. Unit function selection ...................................... 16

For safe and correct use, read this manual and the indoor unit installa-

tion manual thoroughly before installing the air-conditioner unit.

VH79A034H01_IB_IM_01en.indd 1 2021/06/01 13:12:58

019

Check that the box includes the following parts in addition to this installation manual:

Parts Name Quantity

Wireless remote controller 1

Remote controller holder 1

LR6 AA alkaline battery 2

Tapping screws 3.5 × 16 2

Only use LR6 AA batteries. Replace low batteries with new LR6 AA batteries. Observe the polarity of the batteries as

indicated,andinsertthenegativeendrst.

CAUTION

■Do not install in any place exposed to ammable gas leakage.

• Flammable gases accumulated around the body of PAR-SL101A-E may cause an explosion.

■Do not use in any special environment.

• Using in any place exposed to oil (including machine oil), steam and sulfuric gas may deteriorate the performance

signicantlyorgivedamagetothecomponentparts.

■Do not wash with water.

• Doing so may cause an electric shock or a malfunction.

■Do not install in any place at a temperature of more than 40 °C (104 °F) or less than 0 °C (32 °F) or exposed to

direct sunlight.

■Do not install in any steamy place such a bathroom or kitchen.

• Avoid any place where moisture is condensed into dew. Doing so may cause an electric shock or a malfunction.

■Do not install in any place where acidic or alkaline solution or special spray are often used.

• Doing so may cause an electric shock or malfunction.

■Do not touch any circuit board with your hands or with tools. Do not allow dust to collect on the circuit board.

• Doingsomaycausereoranelectricshock.

■Do not touch any control button with your wet hands.

• Doing so may cause an electric shock or a malfunction.

■Do not press any control button using a sharp object.

• Doing so may cause an electric shock or a malfunction.

1. Safety Precautions

2. Conrming the Supplied Parts

VH79A034H01_IB_IM_01en.indd 2 2021/06/01 13:12:58

020

■Use the remote controller holder that is provided to avoid misplacing the remote controller.

■Install the remote controller in a location that meets the following conditions.

• Out of the direct sun light

• Away from any heat sources

• Out of the airflow from the air conditioner (cool or warm)

•Where the operation of the remote controller can easily be performed and the display is

readily visible to the user

• Out of the reach of small children

NOTES:

* If there is a fluorescent light in the room in which the air conditioner is to be installed, turn it

on and make sure that the signal from the remote controller can be received by the indoor

unit from the intended installation location. When the signal receiving unit receives a signal

from the remote controller, a short beeping sound will be heard.

Iftheairconditionerunitisinstalledinaroominwhichauorescentlightonanelectronic

lighting control system (i.e., inverter light) is installed, signal interference may occur.

* Maximum signal receiving distance is approximately 7 meters (Approx. 22 feet). Signal

receiving angle is approximately 45 degrees to the right and the left from the center.

* Install the unit at least 1 meter (Approx. 3 feet) away from the TV or radio.

(If the unit is installed too close to these appliances, signal interference (picture distortion

and noise) may occur.)

■Use the tapping screws that are provided to mount the remote controller holder on the wall,

and then place the remote controller in the holder.

3Press the Reset but-

ton with an object that

has a narrow end.

Two LR6 AA batteries

Insert the negative (–) end of each

batteryrst.Installthebatteriesin

the correct directions (+, –)!

Top cover

2. Press the Reset button.1. Remove the top cover, insert two LR6 AA batteries, and then install

the top cover.

Remote

controller

Self-tapping

screws

Holder

3. Installation

VH79A034H01_IB_IM_01en.indd 3 2021/06/01 13:12:59

021

4. Various settings

The following initial and function settings can be changed with this remote controller.

Stop operation

Initial settings

Function settings

Service

Temperature unit ( button)

Time display ( button)

Auto mode ( button)

Pair No. ( button)

Backlight ON ( button)

Entering the group model setting number

( button)

Operation mode setting

(

button

)

Fan speed setting

(

button

)

Verticalairowdirectionsetting ( button)

Louver setting ( button)

Autofanspeedandairowdirectionsetting

( button)

Set temperature range setting ( button)

Horizontalairowdirectionsetting ( button)

Direct/Indirectairowsetting ( button)

Weekly timer setting ( button)

Automaticlterelevationpaneloperationsetting

( button)

Test run

Self-check

Unit function selection

Separate

setting mode 1

Separate

setting mode 2

Pressing the

button

Pressing the button

while the function No. “1” is lit

Holding down the button

for 5 seconds or longer

Holding down the button

for 5 seconds or longer

Holding down the

button for

5 seconds or longer

VH79A034H01_IB_IM_01en.indd 4 2021/06/01 13:12:59

022

Fig. 5-3

5.1. Switching to the initial setting mode

(Fig. 5-1, Fig. 5-2)

Press the button 1to stop the air conditioner.

•

If the weekly timer is enabled, press the

button 2to disable the timer. ( Gdisappears.)

2. Press the button 3.

• The Function setting screen will be displayed

and the function No. Awill blink.

•

Press the button 4to change the function No.

3. Check that function No. “1” is displayed, and then

press the button 5.

• The Screen display setting screen will be

displayed.

5.2. Changing the temperature unit

(Fig. 5-1, Fig. 5-3 B)

Press the button 6.

• Pressing the button 6changes the temper-

ature unit ( °C / °F ). (The factory setting is “°C”.)

The temperature is displayed in degrees Celsius.

The temperature is displayed in degrees Fahrenheit.

5.3.

Changing the time display

(Fig. 5-1, Fig.5-3

)

Press the button 7.

• Pressing the button 7changes the time

display ( / ). (The factory setting is “12-

hour format”.)

The time is displayed in the 12-hour format.

The time is displayed in the 24-hour format.

5.4.

Changing the AUTO mode

(Fig. 5-1, Fig.5-3

)

Press the button 8.

• Pressing the button 8changes the Auto

mode ( / ). (The factory setting is “Single set

point”.)

: The AUTO mode operates as the usual auto-

matic mode (Single set point).

: The AUTO mode operates using dual set

points.

The following settings can be made in the initial setting

mode.

Item Setting Fig. 5-3

Temperature unit ºC/ºF B

Time display 12-hour format/24-hour format C

AUTO mode Single set point/Dual set point D

Pair No. 0–3 E

Backlight On/Off F

Fig. 5-2

Fig. 5-1

5. Initial setting

VH79A034H01_IB_IM_01en.indd 5 2021/06/01 13:13:00

023

5.5. Changing the pair No. (Fig. 5-1, Fig.5-3 E)

Press the button 4.

• Set the pair number to "0"–"3". (The factory setting is “0”.)

Setting example (when using Mr. Slim)

Independent

system

(1) Same settings

• All of the units can be operated by the same wireless remote

controller.

•All of the indoor PC boards and the

wireless remote controller are set to

the same pair number.

•Install each unit within the receiving

range of the wireless remote con-

troller or have the operator move

the wireless remote controller to

operate each unit.

(2) Separate settings

• Each unit can be operated only by its own wireless remote control-

ler.

•The indoor PC boards and wireless

remote controllers are set to differ-

ent pair numbers for each unit.

Simultaneous

twin/triple/quad-

ruple system

•The system operates regardless

of which indoor unit receives the

signals.

Example of triple system

Outdoor unit

Indoor

unit

Indoor

unit

Indoor

unit

Indoor

unit

Indoor

unit

Indoor

unit

Indoor

unit

Indoor

unit

Pair No.0

Outdoor unit

Pair No.1

Pair No.0

Outdoor unit

Pair No.2

Pair No.0

Outdoor unit

Pair No.3

Pair No.0

Wireless remote controller operation unit

Wireless

remote

controller

receiver

Wireless

remote

controller

receiver

Wireless

remote

controller

receiver

Wireless

remote

controller

receiver

Wireless

remote

controller

receiver

Wireless

remote

controller

receiver

Wireless

remote

controller

receiver

Wireless

remote

controller

receiver

Outdoor unit

Indoor

unit

Indoor

unit

Indoor

unit

Pair No.0 Pair No.0

Pair No.0

Wireless

remote

controller

receiver

Wireless

remote

controller

receiver

Wireless

remote

controller

receiver

Indoor unit setting

Mr. Slim CITY MULTI

Pair No. of wireless remote

controller Indoor PC board jumper wire (J41 and J42 settings)

Indoor PC board

SW22 settings

SW22-3 SW22-4

0 Do not cut (initial setting) ON ON

1 Cut only J41 OFF ON

2 Cut only J42 ON OFF

3 Cut both J41 and J42 OFF OFF

5. Initial setting

VH79A034H01_IB_IM_01en.indd 6 2021/06/01 13:13:00

024

5.6. Changing the backlight setting

(Fig. 5-1, Fig. 5-3

)

Press the button 9.

• Pressing the button 9changes the setting

( / ). (The factory setting is “ON”.)

: The backlight comes on when a button is

pressed.

: The backlight does not come on when a

button is pressed.

5.7. Completing the settings

(Fig. 5-1, Fig. 5-2)

Press the button 5.

• The function No. A blinks.

Press the button 3.

• The remote controller exits the initial setting mode.

(The air conditioner operation is stopped.)

Fig. 6-1

Toconrmthefunctionsandsettingsfortheindoorunit

you want to set, refer to the operation manual and techni-

cal materials for the unit.

6.1. Switching to the function setting

mode (Fig. 6-1)

Press the button 1to stop the air conditioner.

•

If the weekly timer is enabled, press the

button 2to disable the timer. ( Bdisappears.)

2. Press the button

for 5 seconds.

• The remote controller enters the function set-

ting mode. (The group model setting number

blinks.)

6.2. Entering the group model setting

number (Fig. 6-1)

Press the button

• Enter the group model setting number for the in-

door unit you want to operate. (The factory setting

is "001".)

To confirm the group model setting number, refer

to the indoor unit operation manual.

• The fan speed, vertical airflow direction and

operation mode can be set by operating the group

model setting number.

When you want to change any settings other than

above, refer to the descriptions about the sepa-

rate setting modes in the following pages.

5. Initial setting

6. Function settings

VH79A034H01_IB_IM_01en.indd 7 2021/06/01 13:13:00

025

Fig. 6-2

6.3. Separate settings mode 1

(Fig. 6-2, Fig. 6-3)

You can also set the functions as necessary for the

indoor unit that you want to operate.

1) Operation mode setting (The factory setting is

"01".)

1. Press the button 5.

• The operation mode

blinks.

2. Press the button

to select the setting

number D.

Operation mode

display C

Setting

No.

Operation mode

display C

Setting

No.

01 05

02 06

03 07

* If the setting is incorrect, press the button

6and repeat the procedure from step 1.

2) Fan speed setting (The factory setting is "01".)

1. Press the button 7.

• The fan speed Eblinks.

2. Press the button 4to select the setting

number D.

Fan speed display ESetting No. D

(4 speeds) 01

(3 speeds) 02

(2 speeds) 03

(1 speed, none) 04

* If the setting is incorrect, press the button

6and repeat the procedure from step 1.

3) Vertical airflow direction setting (The factory

setting is "01".)

1. Press the button 8.

• The airflow direction Fblinks.

2. Press the button 4to select the setting

number D.

AirowdirectionFSetting

No. D

With auto vane Without auto vane

(With vane, swing)

(With vane, no swing)

No display (no vane) No display (no vane)

* If the setting is incorrect, press the button

6and repeat the procedure from step 1.

6. Function settings

VH79A034H01_IB_IM_01en.indd 8 2021/06/01 13:13:01

026

Louver setting (The factory setting is “01”.)

1. Press the button 9.

• The louver Gblinks.

2. Press the button 4to select the setting

number D.

Louver setting GSetting No.D

No display (Disabled)

(Enabled) 02

• To enable (02) the louver function, disable (01)

the horizontal airflow direction function.

* If the setting is incorrect, press the but-

ton 6and repeat the procedure from step 1.

5) Auto fan speed and airflow direction setting (The

factory setting is "02".)

1. Press the button 0.

• The auto fan speed and airflow direction H

blink. (2 locations)

2. Press the button 4to select the setting

number D.

Autofanspeedandairow

direction setting HSetting No. D

No display (Disabled) 01

(Enabled) 02

* If the setting is incorrect, press the but-

ton 6and repeat the procedure from step 1.

6) Set temperature range setting (The factory setting

is“01”.)

1. Press the button 1

• The number for the set temperature range

setting J“01” blinks.

2. Press the button 4to change the setting

number D.

Set temperature

range setting J

Setting

number D

(Standard)

Cooling/Dry: 19 - 30 °C (67 - 87 °F)

Heating: 17 - 28 °C (63 - 83 °F)

Auto: 19 - 28 °C (67 - 83 °F)

Cooling/Dry: 14 - 30 °C (57 - 87 °F)

Heating: 17 - 28 °C (63 - 83 °F)

Auto: 17 - 28 °C (63 - 83 °F)

Notes:

• If the setting is incorrect, press the but-

ton

and repeat the procedure from step 1.

• Single set point (Auto mode) must be selected

to enable the setting “04”. Refer to 7.3. for the

unit function selection and 5.4. for the way to

change the mode by the remote controller.

• The set temperature range of “04” cannot be

selected if the model does not support it.

6.4. Completing the settings (Fig. 6-3)

Press the button

for 5 seconds.

• The remote controller exits the function setting

mode.

Fig. 6-3

6. Function settings

VH79A034H01_IB_IM_01en.indd 9 2021/06/01 13:13:02

027

Autres manuels pour PAR-SL101A-E Series

Table des matières

Autres manuels Mitsubishi Electric Télécommande

Mitsubishi Electric

Mitsubishi Electric PAR-SL100A-E Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PAC-YT52CRA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Lossnay LGH-RX5-E Series Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PZ-43SMF-E Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PAR-21MAA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PAC-YT53CRAU-J Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PAR-SL100A-E Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PAR-SL100A-E Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric WD-52527 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MAC-SL100M-E Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric CITY MULTI PAR-40MAAU Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PAR-FL31MA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric CITY MULTI MA PAR-41MAA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PAC-ZC40L Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PAR-33MAA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PZ-62DR-E Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PAR-21MAA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Lossnay PZ-60DR-E Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Lossnay PZ-41SLB-E Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PAR-F27MEA-US Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PAC-SE51CRA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric Mr.Slim PAR-30MAA Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric MRCH1 Manuel utilisateur

Mitsubishi Electric

Mitsubishi Electric PAC-YT53CRAU Manuel utilisateur

Manuels Télécommande populaires d'autres marques

Panasonic

Panasonic EUR7622KB0 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen Beo4 Manuel utilisateur

Sunwave Tech.

Sunwave Tech. RemoteComm SRC-7000 Manuel utilisateur

Multiplex

Multiplex PROFI TX 9 Manuel utilisateur

One Remote

One Remote RMB4 Manuel utilisateur

FUTABA

FUTABA 9ZAP - PART2 Manuel utilisateur

HR Matic

HR Matic HR MULTI 3 Manuel utilisateur

Yamaha

Yamaha ACC-GNRST-30-20 Manuel utilisateur

EisSound

EisSound KBSOUND Manuel utilisateur

Marantz

Marantz RC101 Manuel utilisateur

Conrad

Conrad FS20 TC6 Manuel utilisateur

Anritsu

Anritsu MP1777A Manuel utilisateur

Niles

Niles WVC100 Guide de dépannage

RCA

RCA RCU1300 Manuel utilisateur

Bang & Olufsen

Bang & Olufsen BEO6 Manuel utilisateur

GE 94901 Manuel utilisateur

Onbon

Onbon YQ1-75 Manuel utilisateur

FUTABA

FUTABA R7108SB Instructions d'installation